• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2007년도 추계 학술대회논문집
• /
• pp.73-76
• /
• 2007

The present paper describes the results of performance analysis for UH-60A rotor blade in hover. For the numerical simulations, commercial CFD software, FLUENT was used with Spalart-Allmaras turbulence model. The flow solver was based on node based scheme and second order spatial accuracy options was used for simulations. For the enhancement of wake capturing capability, high resolution grid was used around tip vortex region. Granting that somewhat over prediction of thrust was observed near blade tip region, performance was well correlated with experimental data within 3% accuracy in the operating region. Finally it was shown that the present flow solver can be used for preliminary performance analysis tool for hovering helicopter rotor blades.

• 복합신소재구조학회 논문집
• /
• 제3권4호
• /
• pp.1-9
• /
• 2012

Dynamic application lower mode response is of interest, however the higher modes of spatially discretized equations generally do not represent the real behavior. Some implicit algorithms, therefore, are introduced to filter out the high-frequency modes. The objective of this study is to introduce the P-method and PC ${\alpha}$-method to compare that with dissipation method and Newmark method through the stability analysis and numerical example. PC ${\alpha}$-method gives more accuracy than other methods because it based on the ${\alpha}$-method inherits the superior properties of the implicit ${\alpha}$-method. In finite element analysis, the PC ${\alpha}$-method is more useful than other methods because it is the explicit scheme and it achieve the second order accuracy and numerical damping simultaneously.

• 품질경영학회지
• /
• 제20권2호
• /
• pp.137-142
• /
• 1992

MODAPTS has been widely used for establishing the standard time of manual works because of easy application of the system. However this system was developed based on MTM, winch was one of the low task standard. Also in this system, it usually becomes a cause of error in accuracy that all the simultaneous motions(SIMO) should be analyzed in the sequent motions of two hands. In order to improve the weak points of MODAPTS, the structure of time unit and SIMO of MODAPTS was researched, and HITMAP was developed on the basis of Work Factor System which was one of the high task standard. HITMAP is composed of 26 standard elements and it's time unit is MD(1MD=0.1 second) and MGSRMPS is the motion pattern of HITMAP. In this study HITMAP shows more than 95% of accuracy to WF. Therefor, it is expected that HITMAP can be used for the improvement of productivity and incentive systems.

• Geomechanics and Engineering
• /
• 제8권2호
• /
• pp.133-152
• /
• 2015

Mathematical model has been developed for determination of temperature field in multilayer pavement and subgrade, which considers transfer of heat by conduction and convection, receiving of heat from total solar radiation and atmosphere emission, output of heat due to the emission from the surface of pavement. The developed model has been realized by the finite element method for two dimensional problem using two dimensional second order finite element. Calculations for temperature field have been made with the programme realized on the standard mathematical package MATLAB. Accuracy of the developed model has been evaluated by comparison of temperatures, obtained theoretically and experimentally. The results of comparison showed high accuracy of the model. Long-term calculation (within three months) has been made in pavement points in accordance with the data of meteorological station for air temperature. Some regularities have been determined for variation of temperature field.

• Steel and Composite Structures
• /
• 제12권2호
• /
• pp.129-147
• /
• 2012

In this paper, the thermal buckling analysis of rectangular composite laminated plates is investigated using the Differential Quadrature (DQ) method. The composite plate is subjected to a uniform temperature distribution and arbitrary boundary conditions. The analysis takes place in two stages. First, pre-buckling forces due to a temperature rise are determined by using a membrane solution. In the second stage, the critical temperature is predicted based on the first-order shear deformation theory. To verify the accuracy of the method, several case studies were used and the numerical results were compared with those of other published literatures. Moreover, the effects of several parameters such as aspect ratio, fiber orientation, modulus ratio, and various boundary conditions on the critical temperature were examined. The results confirm the efficiency and accuracy of the DQ method in dealing with this class of engineering problems.

• 한국수자원학회논문집
• /
• 제34권2호
• /
• pp.187-195
• /
• 2001

본 연구에서는 TVD기법을 이용한 천수방정식의 수치모형을 개발하였다. 본 모형은 시간과 공간에서 2차 정확도를 가지며 불연속면에서 수치진동을 억제할 수 있다. 풍상차분기법에 근거한 TVD기법은 Riemann 해의 계산이 수반되어야 하며, 여기서는 HLLC기법이 사용되었다. 개발된 모형의 적용성과 정확성을 검증하기 위해 단순화된 하도에서 댐 붕괴파와 포물형 수조에서의 흐름의 오르내림을 모의하였다. 수치해는 해석해와 잘 일치하였다.

• 한국치위생학회지
• /
• 제19권5호
• /
• pp.825-834
• /
• 2019

Objectives: To analyze whether there are perceptual differences in internet oral health information use between ordinary people who underwent dental treatments and dental hygienists. Second, the study aimed to analyze related issues, and, third, to find a developmental direction to provide fundamental information for developing patient-customized websites to improve dental services to suit contemporary needs. Methods: From September 1 to September 30, 2018, a questionnaire survey was conducted, with 367 participants (209 dental hygienists and 149 patients) in order to analyze their objective agreement, subjective congruence, and accuracy. As a study tool, the questionnaire consisted of 11 items about the perception of internet oral health information use and 11 on the estimated perceptions of both groups in order to compare their perceptions and estimates of each other. Results: Objective agreement was analyzed and, as a result, dental hygienists and patients were found to demonstrate similar results in terms of their perceptions of internet oral health information use. With regard to subjective agreement, the study subjects either underestimated or overestimated internet oral health information use more than they perceived. In terms of accuracy, dental hygienists and patients had different perceptions regarding internet oral health information use. Therefore, accuracy was somewhat low. Conclusions: In order to improve individuals' self-care ability and increase therapeutic instructional adherence for oral healthcare, it is necessary to apply internet oral health information properly to each patient's individual oral state.

• 대한수학회논문집
• /
• 제20권3호
• /
• pp.563-578
• /
• 2005

In [Z. Cai and B. C. Shin, SIAM J. Numer. Anal. 40 (2002), 307-318], we developed the discrete first-order system least squares method for the second-order elliptic boundary value problem by directly approximating $H(div){\cap}H(curl)-type$ space based on the Helmholtz decomposition. Under general assumptions, error estimates were established in the $L^2\;and\;H^1$ norms for the vector and scalar variables, respectively. Such error estimates are optimal with respect to the required regularity of the solution. In this paper, we study solution methods for solving the system of linear equations arising from the discretization of variational formulation which possesses discrete biharmonic term and focus on numerical results including the performances of multigrid preconditioners and the finite element accuracy.

• Steel and Composite Structures
• /
• 제15권2호
• /
• pp.175-202
• /
• 2013

The super convergent laminated composite beam element is newly derived for the lateral stability analysis. For this, a theoretical model of the laminated composite beams is developed based on the first-order shear deformation beam theory. The present laminated beam takes into account the transverse shear and the restrained warping induced shear deformation. The second-order coupling torque resulting from the geometric nonlinearity is rigorously derived. From the principle of minimum total potential energy, the stability equations and force-displacement relationships are derived and the explicit expressions for the displacement parameters are presented by applying the power series expansions of displacement components to simultaneous ordinary differential equations. Finally, the member stiffness matrix is determined using the force-displacement relationships. In order to show accuracy and superiority of the beam element developed by this study, the critical lateral buckling moments for bisymmetric and monosymmetric I-beams are presented and compared with other results available in the literature, the isoparametric beam elements, and shell elements from ABAQUS.

• 대한토목학회논문집
• /
• 제42권2호
• /
• pp.291-298
• /
• 2022

최근 개발되는 드론은 저가이면서 운용의 편의성 또한 높아 드론을 이용한 공간정보 제작 및 활용이 나날이 증대되고 있다. 그러나, 대부분 저가형의 드론은 저정밀도 GNSS (Global Navigation Satellite System), IMU (Inertial Measurement Unit)를 탑재하여 영상을 취득하기 때문에 영상이 초기에 가지고 있는 위치정보 및 회전각 요소의 정확도가 낮다. 또한, 기체가 작고 가벼워 바람의 영향을 많이 받기 때문에 일정한 중복도를 유지하기에 어려움이 있으며 이러한 문제가 위치결정 정확도에 영향을 미친다. 이에 본 연구에서는 외부표정요소 변화에 따른 위치 정확도 변화를 분석하기 위하여 서로 다른 시기에 촬영한 영상을 Pix4D Mapper로 영상처리하고 성과물의 정확도를 분석하였다. 외부표정요소에 따른 정확도 변화를 세밀하게 분석하기 위하여 1차 처리 결과의 외부표정요소를 2차 처리 시 메타데이터로 활용하였다. 이후 외부표정요소를 스트립별로 나누어 변화량을 분석하였다. 분석 결과 회전각 요소 중 Omega, Phi값의 변화는 표고위치 정확도, Kappa값은 평면위치 정확도의 저하에 더욱 관련되어 있음을 입증하였다.