• Korean Journal of Ichthyology
• /
• v.21 no.2
• /
• pp.118-124
• /
• 2009

A Korean trawl fishery was conducted on the Emperor Seamounts in the northwestern Pacific Ocean from 2005 to 2007. Total catches were 750 mt, 460 mt and 440 mt in 2005, 2006 and 2007, respectively. Splendid alfonsino (Beryx splendens) and North Pacific armorhead (Pseudopentaceros wheeleri) were dominant in the commercial fisheries on the Emperor Seamounts during 2005-2007. Biomass of each species was estimated by the swept area method from March 2005 to August 2007. During three years, average biomass of Splendid alfonsino and North Pacific armorhead were 791 mt and 266 mt, respectively.

• Journal of Ocean Engineering and Technology
• /
• v.4 no.1
• /
• pp.35-42
• /
• 1990

The area where age dating of the seafloor and interpretation of geomagnetic basic structure are conducted is also important in the aspect of geophysics. Near the sea mount (water depth to the top is 3900m and 6500m to the bottom), there are Mesozoic magnetic lineations at the sea-side flank along the trench axis. A two dimensional model analysis of Talwani and Heirtzler(1964) and a three dimensional model analysis of Talwani are performed by using data obtained from the marine proton magnetometer. Distribution, direction of the lineation, amplitude and period of magnetic anomaly are correlated and analysed with speed of the plate movement and lineation of the sea mount. In the west and north-west Pacific there are lots of huge sea mounts retaining the history of oceanic crust. This indicates that geomagnetic basis subsided into the oceanic crust and has interest in the aspects of the isostasy theory of the gravity.

• Economic and Environmental Geology
• /
• v.49 no.2
• /
• pp.121-134
• /
• 2016

We characterize the spatial distribution of Cobalt-rich ferromanganese crusts covering the summit and slopes of a seamount in the western Pacific, using acoustic backscatter from multibeam echo sounders (MBES) and seafloor video observation. Based on multibeam bathymetric data, we identify that ~70% of the summit area of this flattopped seamount has slope gradients less than $5^{\circ}$. The histogram of the backscatter intensity data shows a bi-modal distribution, indicating significant variations in seabed hardness. On the one hand, visual inspection of the seafloor using deep-sea camera data exhibits that the steep slope areas with high backscatter are mainly covered by manganese crusts. On the other hand, the visual analyses for the summit reveal that the summit areas with relatively low backscatter are covered by sediments. The other summit areas, however, exhibit high acoustic reflectivity due to coexistence of manganese crusts and sediments. Comparison between seafloor video images and acoustic backscatter intensity suggests that the central summit has relatively flat topography and low backscatter intensity resulting from unconsolidated sediments. In addition, the rim of the summit and the slopes are of high acoustic reflectivity because of manganese crusts and/or bedrock outcrops with little sediments. Therefore, we find a strong correlation between the acoustic backscatter data acquired from sea-surface multibeam survey and the spatial distribution of sediments and manganese crusts. We propose that analyzing acoustic backscatter can be one of practical methods to select optimal minable areas of the ferromanganese crusts from seamounts for future mining.

• 한국해양학회지
• /
• v.27 no.3
• /
• pp.210-227
• /
• 1992

KODOS-89 area, the northwestern part of Clarion-Clarion-Clipperton fracture zones in the Northeast Pacific, was surveyed in order to study the occurrence and distribution of manganese nodules. Variations in the nodule characteristics are related mainly to seafloor topography. Nodules from abyssal plain have high Mn/Fe ratio and high Mn, Cu, Ni and Zn concentrations, whereas those from seamount are characterized by low Mn/Fe ratio and high Fe and Co concentrations. These compositional characteristics are attributed to toxic diagnosis and hydrogenesis, respectively. Nodules of the early diegenetic origin tend to accurate crystalline Mn-oxides uniformly within the topmost sediment layers and maintain a regular spheroidal, ellipsoidal to discoidal shape with rough surface textures. On the other hand, those of hydrogenetic origin are characterized by polynucleation, irregualr shape, and smooth surface textures. Nodule abundance is high (avg. 13.4 kg/m$^2$) in seamount area, resulting from ample supply of nucleating materials by auto-fragmentation of older nodules. Nodule abundance in abyssal plain is relatively low (avg. 3.9 kg/m$^2$) and tends to increase southward. This phenomenon results from facilitation of taking seed materials from adjacent seamount and enhancement of the early diagenesis by sufficient supply of organic materials. Nodule abundance is considered to be controlled primarily by seeding effects and secondly by supplies of organic materials.

• 한국해양학회지
• /
• v.26 no.1
• /
• pp.1-12
• /
• 1991

A multi-disciplinary geophysical study including gravity, magnetic, and seismic reflection profiling was carried out in the area between the Clarion fracture zone and the Clippertone fracture zone o the northeastern equatorial Pacific basin. There are small free-air gravity anomalies of less than 20 mgal over seamounts and the east-west trending abyssal hills. The negative residual gravity anomalies over seamounts may indicate the existence of low density seamount roots compared to surrounding oceanic crust. Non-existence of magnetic lineations and the magnetic anomalies of small smplitude with no polarity change in the east-west direction support that the study area belongs to the Cretaceous magnetic quite zone. Positive magnetic anomalies over seamounts offset 100 km in the east-west direction in the southern part of the study area suggest a possibility of left-lateral movement of those seamounts along unknown fractures. The sedimentary section in the study area can be divided into three units (Unit I, unit IIA, and Unit IIB) n the basis of reflection characteristics. the total thickness of sedimentary section varies from 200 to 400 meters and the sedimentary section is thicker in the southern area of rough topography near the seamount belt than in the northern flat area. Manganese nodules are abundant in the southern part of the study area where the ridges are developed and the Unit I layer is thicker than 100 meters.

• Journal of the Mineralogical Society of Korea
• /
• v.25 no.4
• /
• pp.233-247
• /
• 2012

We have researched the distribution and characteristics of seafloor hydrothermal deposits for the development of economic mineral deposits in the Lau Basin, Tonga since 2009. In this study, we interpreted hydrothermal alteration around TA 26 seamounts of the Tofua volcanic arc using X-ray diffraction analysis for bulk sample and preferred-oriented specimen of clay fraction. We used 2 core samples and several surface samples. Plagioclase and quartz are dominant mineral in the basement rock, whereas kaolin mineral and smectite are superior in marine surface sediments. Especially sulfate and sulfide minerals such as gypsum, barite, sphalerite, and pyrite are predominant in the vent sediments. When we compare the mineral composition between basement rock and sea surface sediments, argillic alteration zone composed of kaolin mineral and smectite could be produced by hydrothermal fluids. Based on the downcore variation of mineral assemblages, most portion of MC08H-06 core could be interpreted as argillic alteration zone composed of kaolin mineral and smectite except top 2 cm area. Various sulfate or sulfide minerals and argillic alteration zone suggest a high probability of massive sulfide deposits in the seafloor of the TA 26 seamount.

• Journal of the Mineralogical Society of Korea
• /
• v.19 no.3 s.49
• /
• pp.163-169
• /
• 2006

Mineralogy and geochemistry of the sediment core from the seamount (2710 m below the sea level) just south of the Antarctic Polar Front were examined to draw paleoceanographic information in glacial-interglacial cycles. Smectite was most abundant clay mineral associated with illite and chlorite. Its content was slightly higher below 170 cm, suggesting a boundary between isotope stage 4 and 5. Si, Zr, Cs, Th, REE, $K_{2}O$, and $Al_{2}O_{3}$ show complete antithetical distribution with respect to $CaCO_{3}$ through the core. $SiO_{2}$ maxima and $CaCO_{3}$ minima at depths of 24, 136, and 176 cm are probably correlated with massive influx of ice-rafted debris during the advance of Antarctic ice shelves. Ni, Cu, and Ba show rather little correlation with $SiO_{2}$, suggesting their relation to biogenic debris, precipitation from seawater, or hydrothermal input. Particularly, Ba maxima tend to lag $10{\sim}20cm$ after $SiO_{2}$ maxima, probably due to rapid increase of productivity following deglaciation.

• Economic and Environmental Geology
• /
• v.44 no.5
• /
• pp.359-372
• /
• 2011

TA26 seamount, which is located at south part of Tonga arc, occurs widely hydrothermal plume and is area that sampled hostrock, hydrothermal ore and hydrothermal alteration rock for this study. Hostrocks are basalt and basaltic andesite. Altered rocks by hydrothermal solution consists of plagioclase, pyroxene, pyrite, ilmenite, amorphous silica, barite, smectite, iron sulfates, Fe-Si sulfates and Fe silicates. Gains and losses of major, trace and rare earth elements during wallrock alteration suggest that $K_2O$(+0.04~+0.45 g), $SiO_2$(-6.52~+10.56 g), $H_2O$(-0.03~+6.04 g), $SO_4$(-0.46~+17.54 g), S(-0.46~+13.45 g), total S(-0.51~+16.93 g), Ba(-7.60~+185078.62 g), Sr(-36.18~+3033.08 g), Ag(+54.83 g), Au(+1467.49 g), As(-5.80~+1030.80 g), Cd(+249.78 g), Cu(-100.57~+1357.85 g), Pb(+4.91~+532.65 g), Sb(-0.32~+66.59 g), V(-113.58~+102.94 g) and Zn(-49.56~+14989.92 g) elements are enriched from hydrothermal solution. Therefore, gained(enriched) elements(($K_2O$, $H_2O$, $SO_4$, S, total S, Ba, Sr, Ag, Au, As, Cd, Cu, Pb, Sb, V, Zn) represent a potentially tools for exploration of sea-floor hydrothermal deposits from the Tonga arc.

• Economic and Environmental Geology
• /
• v.46 no.6
• /
• pp.569-580
• /
• 2013

Co-rich ferromanganese crusts (Fe-Mn crusts) distributed on the seamounts in the western Pacific are potential economic resources for cobalt, nickel, platinum, and other rare metals in the future. Regulations for prospecting and exploration of Fe-Mn crusts in the Area, which enables the process to obtain an exclusive exploration right for blocks of the fixed size, were enacted recently by the International Seabed Authority, which led to public attention on its potential for commercial development. Evaluation and selection of a mining site can be established based on abundance and grade of Fe-Mn crusts in the site as well as topography that should be smooth enough for mining efficiency. Therefore, acquisition of shipboard echo-sounding and acoustic backscatter data are prerequisite to select potential mine sites in addition to visual and sampling operations. Acoustic backscatter data can be used to locate crust-covered areas in a regional scale with the understanding of acoustic properties of crust through its correlation with visual and sampling data. KIOST had collected the topographic and geologic data to assess the resources potential for Fe-Mn crusts in the west Pacific region from 1994 to 2001. However, they could not obtain acoustic backscatter data that is crucial for the selection of prospective mining sites. Therefore, additional exploration surveys are required to carry out side scan sonar mapping combined with seafloor observation and sampling to decide the blocks for application of an exclusive exploration right.

• Geophysics and Geophysical Exploration
• /
• v.12 no.1
• /
• pp.105-113
• /
• 2009

The interpretation of observed waveform characteristics identified in refraction and wide-angle reflection data increases confidence in the crustal structure model obtained. When calculating traveltimes and raypaths, wavefront methods on a regular grid based on graph theory are robust even with complicated structures, but basically compute only first arrivals. In this paper, we develop new algorithms to compute traveltimes and raypaths not only for first arrivals, but also for fast and later reflection arrivals, later refraction arrivals, and converted waves between P and S, using the modified wavefront method based on slowness network nodes mapped on a multi-layer model. Using the new algorithm, we can interpret reflected arrivals, Pg-later arrivals, strong arrivals appearing behind Pn, triplicated Moho reflected arrivals (PmP) to obtain the shape of the Moho, and phases involving conversion between P and S. Using two models of an ocean-continent transition zone and an oceanic ridge or seamount, we show the usefulness of this algorithm, which is confirmed by synthetic seismograms using the 2D Finite Difference Method (2D-FDM). Characteristics of arrivals and raypaths of the two models differ from each other in that using only first-arrival traveltime data for crustal structure analysis involves risk of erroneous interpretation in the ocean-continent transition zone, or the region around a ridge or seamount.