• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2007.05a
• /
• pp.364-367
• /
• 2007

Typical seamless tube production methods are an extrusion and a rotary tube piercing. The rotary piercing process is more competitive than the extrusion process form view point of productivity, quality, and flexibility. It consists of twin rolling mills, a pair of disc or flat guides, and a plug. Twin rolling mills are skewed with proper angles in two directions. A round billet is progressively fed forward and rotated due to the rotation of twin rolling mills. Internal crack initiation and growth at central area of the billet are gradually progress because of the repeating actions of tension and rotation. Design variables in the rotary piercing rolling process are the feed angle, the cross angle, the reduction ratio, and the position of plug. In this work, a rotary tube piercing machine was developed and parametric studies on design variables were carried out using finite element analysis. The Brozzo ductile fracture criterion was utilized to determine an internal crack initiation.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.05a
• /
• pp.97-100
• /
• 2008

A hybrid sounding rocket carrying about 10kg payload reaching up to 15km altitude has been designed. The commercial seamless aluminium tube and liquid ${N_2}O$ without pressurization devices were chosen as rocket motor case and oxidizer supply system respectively. A hybrid rocket engine performing required propulsion impulse is designed with time dependent internal ballistic scheme. Engine performance, aerodynamic characteristics, and trajectory were predicted by a integral technique of internal ballistics and external ballistics. The design results were evaluated by comparison with previous experimental data, technical reports, and literatures.

• Journal of Broadcast Engineering
• /
• v.14 no.1
• /
• pp.15-27
• /
• 2009

As various portable digital devices are developed, the space of the TV audience is expanding. We propose a structure of broadcasting control in VOD service in which viewers can resume the viewing of digital broadcasting contents in different devices after they have stopped the viewing to move to another place. Then we design a session and resource management system of VOD for this control. In particular, we design the session management of each consumer and simulate the seamless VOD connection model.

• Journal of the Optical Society of Korea
• /
• v.20 no.6
• /
• pp.678-685
• /
• 2016

The standard high-availability seamless redundancy (HSR) protocol utilizes duplicated frame copies of each sent frame for zero fail over time. This means that even in cases of a node or link failure, the destination node will receive at least one copy of the sent frame, resulting in no network downtime. However, the standard HSR is mostly based on the electrical signal connection inside the node, which leads to the production of considerable latency at each node due to frame processing. Therefore, in a large scale HSR ring network, the accumulated latencies become significant and can often restrict the mission-critical real-time application of HSR. In this paper, we present a novel design for optical HSR (OHSR) that uses beam splitting/combining techniques. The proposed OHSR passes the frames directly to adjacent nodes without frame processing at each node, thereby theoretically generating no latency in any node. Various simulations for network samples, made to validate the OHSR design and its performance, show that the OHSR outperforms the standard HSR.

• Journal of Electrical Engineering and information Science
• /
• v.3 no.2
• /
• pp.139-144
• /
• 1998

This paper describes the design of a variable rate QPSK demodulator for digital satellite TV system. This true variable-rate demodulator employs a unique architecture to realize an all digital synchronization and detection algorithm. Data-flow based design approach enabled a seamless transition from high level design optimization to physical layout. The demodulator has been integrated with Viterbi decoder, de-interleaver, and Ree-Solomon decoder to make a single chip Digital Video Broadcast (DVB) receiver. The receiver IC has been fabricated with a 0.5mm CMOS TLM process and proved fully functional in a real-world set-up.

• Proceedings of the IEEK Conference
• /
• 2001.06b
• /
• pp.117-120
• /
• 2001

This paper presents a HW/SW co-design environments and its validation for development of virtual component on the 32-bit RISC core which is used in the design of Information-Appliance-On-a-Chip. For the experimental environment, we developed the cycle-accurate instruction set simulator based on SE3208 RISC core of ADChips. To verify the function of RISC core at the cycle level, we implemented the verification environment by grafting this simulator on the Seamless CVE which is a commercial co-verification environment.

• Proceedings of the Korea Society of Design Studies Conference
• /
• 1999.10a
• /
• pp.44-45
• /
• 1999

The term ′multimedia′ has been one of the most pervasively used terms for the last a few years. Dyrli and Kinnaman(1995) define multimedia as "the seamless digital integration of text, graphics, animation, audio, still image, and motion video in a way that provides individual users with high levels of control and interaction".(omitted)

• IEMEK Journal of Embedded Systems and Applications
• /
• v.5 no.4
• /
• pp.175-184
• /
• 2010

This paper designs a virtual USB drive for mobile devices which gives an illusion of a traditional USB flash memory drive and provides capacity-free storage space over IP network. The virtual USB drive operating with a S3C2410 hardware platform and embedded linux consists of USB device driver, an iSCSI-enabled network stack, and a seamless USB/iSCSI tunneling module. For performance enhancement, it additionally provides a kernel-level seamless USB/iSCSI tunneling module and data sharing with symbol references among kernel modules. Experiments reveal that the kernel-level implementation can improve the I/O performance up to 8 percentage, as compared with the user-level implementation.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.3 no.1
• /
• pp.231-236
• /
• 2000

The wall thickness of the Ti-6Al-4V Large-Diameter Seamless Tube, which is supposed to be a very important parameter in a system design, was measured during $360^{\circ}$ cold bending processes. The factors or processes affecting the wall thickness include 1) primary bending, 2)secondary or finishing step of the $360^{\circ}$ bending, 3)cleaning processes in CERO TRUTM(CT)process. But thinning effects of the wall thickness during the cleaning processes are negligible compared to those during the formers. The variations in the percentages of the change in wall thickness were found to be from -14% to +16%.

• 유체기계공업학회:학술대회논문집
• /
• 2006.08a
• /
• pp.555-556
• /
• 2006

An experimental performance test has been carried out to improve a new blade with higher performance. Most of blades of the fan are designed to be a seamless and simple type, and the flow momentum can generally be evaluated to be comparatively low. Because some portions of the blowing winds can easily be passed through the seamless sharp edge of the blade, and several results studied on these problems have been reported: on the simple blade with edge-line seam, on the simple blade with guide seam. However the results do not show the remarkable increasement of performance of the blades. In this experimental performance test of the blades the design techniques of the blades with double seams (stem seam and edge seam) and comparison tests have been focused. As a first step the comparisons of velocity distributions and flow-rates depending upon the blade are presented in this paper.