• Restorative Dentistry and Endodontics
• /
• 제1권1호
• /
• pp.26-32
• /
• 1975

After a vital pulpotomy in dogs' teeth, the responses of the remaining pulp tissue under hydroxides (calcium hydroxide, magnesium hydroxide, aluminium hydroxide and zinc hydroxide) were studied histologically. The class V cavities were prepared on the teeth and the pulp was amputated. Each hydroxide was placed over the amputated tissue and the cavity was sealed with zinc oxide eugenol cement. Animals were sacrificed after 3 days, 1, 2, and 3 weeks following the operation. The teeth were decalcified, sectioned and stained with hematoxylin and eosin. Microscopic examination reveals as follows; 1. Calcium hydroxide: Inflammatory change was seen in the superficial portion of the remaining pulp tissue at the 3rd day and 1st week. The incompleted calicified material began to be deposited from the canal wall at the 2nd week, and the advanced calcified material was seen at the 3rd week. 2. Magnesium hydroxide: Severe inflammatory change was seen in the superficial portion of the remaining pulp from the 3rd day and the 1st week samples. Inflammatory change was decreased at the 2nd week and the slight calcified material was deposited from the root canal at the 3rd week. 3. Aluminium hydroxide: Severe inflammatory changes were seen in the remaining pulp tissue, the blood vessel was dilated, and the odontoblasts were destroyed at the 3rd day and 1st week. The fibrous degeneration spread to the apex at the 2nd week. There was no evidence of newly formed odontoblasts or deposition of calcified material underneath aluminium hydroxide. 4. Zinc hydroxide: The micrscopic picture was destructive. A thick necrotic layer was found under the amputated surface at the 3rd day and 1st week. Granulation tissue formation as well as chronic inflammatory changes extended to the apical area in the pulp tissue. Also there were no sign of odontoblastic formation or calcified material at the 2nd and 3rd week.

• Restorative Dentistry and Endodontics
• /
• 제28권5호
• /
• pp.363-368
• /
• 2003

The purpose of this study is to evaluate the effect of additional enamel etching with phosphoric acid on the microleakage of the adhesion of self-etching primer system. Class V cavity($4mm{\times}3mm{\times}1.5mm$) preparations with all margins in enamel were prepared on buccal surface of 42 extracted human upper central incisor teeth. Prepared teeth were randomly divided into 3 groups. Group 1：no additional pretreatment with 37% phosphoric acid (NE). Group 2：additional pretreatment with 37% phosphoric acid for 10 seconds (E10s). Group 3：additional pretreatment with 37% phosphoric acid for 20 seconds (E20s). The adhesives(Clearfil SE $Bond^{\circledR}$, Kuraray, Osaka, Japan) and composite resins(Clearfil $AP-X^{\circledR}$, Osaka, Kuraray, Japan) were applied following the manufacturer's instructions. All the specimens were finished with the polishing disc(3M dental product, St Paul, MN, USA), thermocycled for 500 cycles between $5^{\circ}C$ and $55^{\circ}C$ and resected apical 3-mm root. 0.028 stainless steel wire was inserted apically into the pulp chamber of each tooth and sealed into position with sticky wax. Surrounding tooth surface was covered with a nail varnish 2 times except areas 1mm far from all the margins. After drying for one day, soaked the samples in the distilled water. Microleakage was assessed by electrochemical method(System 6514, $Electrometer^{\circledR}$), Keithley, USA) in the distilled water. In this study, the microleakage was the lowest in group 1 (NE) and the highest in group 3(E20s)(NE

• Restorative Dentistry and Endodontics
• /
• 제8권1호
• /
• pp.123-131
• /
• 1982

The purpose of this study was to observe the responses of the remaining pulp tissue after pulpotomy upon the several kinds of $Ca(OH)_2$ products and the responses of periapical tissue upon some root canal filling materials after extirpation. For pulpotomy, the class V cavities were prepared on the premolars, molars and upper canines, and the pulp was amputated. Each drug was placed over the amputated tissue and cavity was sealed with zinc oxide eugenol cement. The drugs which were used for the study were Dycal (Caulk Co. U.S.A.), Cavitec (Kerr Co. U.S.A.), Calvital, Nobudyne and Neodyne (Neo Dental Chemical Products). For extirpation, the endodontic cavities were prepared on the lingual surfaces of anterior teeth, and the pulp tissues were extirpated as routine method. After enlarging, irrigation, and measuring of root length by taking X-ray, each root canal filling material was filled in the canal with gutta percha cone, and endodontic cavity was sealed with zinc oxide eugenol cement. Zinc oxide eugenol, $Ca(OH)_2$ (Eli Lilly Co. U.S.A.) and Vitapex (Neo Dental Chemical Products) were used as root canal filling materials. Animals were sacrificed after 1, 3 and 6 weeks following the operation. The teeth were decalcified in formic acid, sectioned and stained with hematoxylin eosin. Microscopic examination revealed as follows. 1. Dycal: The dentin bridge formation was observed at the 3rd week after pulpotomy. Inflammatory conditions which were infiltration of inflammatory cells and dilatation of blood vessels were kept in remaining pulp tissue at the 6th week. 2. Calvital: The dentin bridge was observed at the 1st week after pulpotomy. As the time clasped, the pulp tended to be the fibrous degeneration. 3. Cavitec, Nobudyne and Neodyne: In the case of Cavitec and Nobudyne, the incompleted and irregular dentin bridge was observed at the 6th week, and in Neodyne, was observed at the 3rd week. The severe inflammatory changes were seen in the remaining pulp tissue. As the time clasped, the fibrous degeneration tended to spread in the remaining pulp tissue. 4. $Ca(OH)_2$: Osteocementum was formed at the 3rd week, the matrix of cementum and dentin were resorted, and infiltration of lymphocytes was seen in periapical tissue when $Ca(OH)_2$ was used as canal-filling materials. S. ZOE and Vitapex The cementum like substance was seen in periapical portion at the 1st week, when ZOE and Vitapex were used as root canal filling materials. As the time elapsed, the matrix of cementum and dentin tended to be resorted. At the 6th week, the inflammatory condition of periapical tissue was continued in the case of ZOE, but was reduced in the case of Vitapex.

• Restorative Dentistry and Endodontics
• /
• 제36권5호
• /
• pp.419-424
• /
• 2011

연구목적: 임상에서 주로 사용되는 가봉재가 레진 코팅된 상아질과 레진 인레이간 결합력에 미치는 영향을 밝히고, 지연 상아질 봉쇄법과 즉시 상아질 봉쇄법의 접착에 대한 효과를 비교 평가하고자 본 연구를 시행하였다. 연구 재료 및 방법: ZOE로 임시 가봉한 후 상아질 접착제로 지연 상아질 봉쇄법을 이용한 군을 1군, 즉시 상아질 봉쇄법을 이용하고 ZOE로 가봉한 군을 2군, 즉시 상아질 봉쇄법을 이용하고 Dycal로 가봉한 군을 3군, 즉시 상아질 봉쇄법을 이용하고 레진계열의 임시 가봉재로 가봉한 군을 4군으로 분류하였다. 각 그룹에서 가봉재를 제거하고 미리 제작한 레진 인레이를 와동에 합착한 후 근원심으로 절단하여 미세인장 결합 강도를 측정하였다. 결과: 1군에서 가장 낮은 결합력, 4군에서 가장 큰 결합력 나타내었다(p < 0.01). ZOE로 임시 가봉을 한 경우 즉시 상아질 봉쇄법이 지연 상아질 봉쇄법에 비해 결합력이 컸다(p < 0.01). 결론: 레진 인레이의 상아질 접착시 지연 상아질 봉쇄법보다 즉시 상아질 봉쇄법이 권고되며, 레진 계열의 임시 가봉재가 가장 우수한 결과를 보였다.

• 센서학회지
• /
• 제7권3호
• /
• pp.171-178
• /
• 1998

SDB 웨이퍼를 이용하여 실리콘 압저항형 절대압센서를 제조하고 이를 가스누출 감지시스템에 응용하였다. 이 경우 센서는 $0{\sim}600\;mmH_{2}O$, $0{\sim}100^{\circ}C$의 압력, 온도범위에서 정상적으로 동작하여야 하고 다이아프램이 파괴되었을 때 가스가 소자 외부로 누출되어서는 안된다. 따라서 다이아프램 내의 공극을 유리(Pyrex7740)와 진공중($10^{-4}$ torr)에서 양극 접합을 행하였다. 제조된 센서는 압력에 대하여 우수한 선형특성을 보였고, 압력감도는 대기압이상 $0{\sim}600\;mmH_{2}O$의 압력범위에서 $4.06{\mu}V/VmmH_{2}O$ 이었다. 온도보상 일체화 조건을 조사하기 위해 Al 박막저항을 제조하여 온도보상을 행하였는데 오프셋의 온도 drift는 80 %이상, 감도의 온도의존성은 95 %이상 보강 효과를 얻었다. 또한 다이오드(PXIN4001)를 이용한 온도보상시 오프셋의 온도 drift는 98 %이상, 감도의 온도의존성은 90%이상 보상 효과를 나타내었다.

• Restorative Dentistry and Endodontics
• /
• 제30권1호
• /
• pp.22-30
• /
• 2005

수복물의 변연 미세 누출과 마모 개선을 위해 표면 전색제가 개발되었으며 이의 효과에 대해 알아보기 위해, 규격화된 치경부 5급 와동을 25개의 소구치의 협면에 형성하고 Single Bond와 Z-250으로 수복한 뒤, $37^{\circ}C$의 증류수에 7일간 보관한 후 무작위로 5군으로 나누고 다음과 같은 재료로 제조사의 지시에 따라 표면 처리하였다 : No sealing ; Single Bond Adhesive ; Biscover ; Fortify ; Optiguard. 그 후 잇솔질 마모시험을 시행하였다. 표면 조도는 잇솔질 전후에 profilometer로 측정되었고 paired t-test와 ANOVA로 비교하였다. 접착면과 표면변화는 전자현미경으로 관찰하였다. 미세누출 평가를 위해 시편은 $2\%$ methylene blue 용액으로 염색한 뒤, 협설로 잘라 제작하였다. 입체현미경을 이용하여 교합면쪽과 치경부쪽 계면에서 미세누출을 관찰하고 Kruskal-Wallis와 Mann-Whitney U test를 이용하여 그 결과를 비교하였다. 표면 조도는 잇솔질 후 수치가 증가하였으나 통계학적으로 유의한 차이를 나타내지는 않았다. 전자 현미경 관찰 결과, 표면 전색제가 접착면에 부분적으로 남아있기도 하였으나 많은 부분에서 떨어져 나간 상태였다. 특히, 미세 틈새가 치경부쪽 변연에서 나타났다. 미세누출 실험에서는 법랑질에서 더 봉쇄효과가 좋았으며 교합면쪽 변연에서 군간에 유의할만한 차이를 나타내었다. 조절군과 Single Bond를 도포한 군에서는 치경부쪽 변연보다 법랑질쪽 변연에서 유의하게 좋은 변연 봉쇄 효과를 나타내었다.

• 대한소아치과학회지
• /
• 제27권2호
• /
• pp.351-360
• /
• 2000

치면 산처리가 V급 와동의 compomer 수복에서 미세누출에 미치는 영향을 평가하기 위하여 180개의 발거된 건전한 치아에 생리적인 치수내압을 가한 시편을 제작하였으며, CEJ 1mm 상방에 $6\times3\times2mm$의 상자형 V급 와동을 형성하여 수복재료 및 산처리 시간에 따라 다음과 같이 30개씩 6개의 군으로 분류하였다. A : Dyract AP + Prime&Bond 2.1 1군 : 산처리 없음, 2군 : 15초간 산처리 시행, 3군 : 30초간 산처리 시행. B : F2000 + Single Bond adhesive 1군 : 산처리 없음, 2군 : 15초간 산처리 시행, 3군 30초간 산처리 시행. 산처리를 제외한 모든 수복과정은 제조회사의 지시에 따랐으며, 수복 후 시편은 $5\sim55^{\circ}C$에서 500회의 thermocycling을 거쳐 5% methylene blue용액에 5시간 동안 침적 후 교정용 투명레진에 매몰되었다. 저속용 경조직 절단기로 시편을 절단후 20배율의 stereoscope 하에서 미세누출을 관찰하여 다음과 같은 결론을 얻었다. 1. 교합벽에서 Dyract AP는 산처리를 시행한 군이 산처리를 시행하지 않은 군에 비해 유의하게 낮은 미세누출을 보였지만 (p<0.05), F2000에서는 산처리 여부가 미세누출 정도에 유의차를 보이지 않았다(p>0.05). 2. 치은벽에서 Dyract AP는 산처리를 시행하지 않은 1군이 2군에 비해 유의하게 높은 미세누출 정도를 보였지만 (p=0.003), 3군과는 유의차를 보이지 않았고(p=0.99), F2000에서는 산처리가 미세누출을 유의하게 감소시켰다. (p<0.05). 3 교합벽과 치은벽의 비교에서, 두 재료 모두 교합벽에서 낮은 미세누출 정도를 보였지만, Dyract AP의 3군에서는 유의성을 보이지 않았다(p=0.117). 4. 두 재료 모두 2군과 3군 사이의 미세누출 정도에서는 유의차를 보이지 않았다(p>0.05). 이를 종합해 볼 때, compomer 수복 시 산처리는 미세누출을 감소시키는 유효한 방법이라고 사료된다.

• Restorative Dentistry and Endodontics
• /
• 제27권2호
• /
• pp.142-149
• /
• 2002

Low-viscosity composite resins may produce better sealed margins than stiffer compositions (KempScholte and Davidson, 1988: Crim, 1989). Plowable composites have been recommended for use in Class V cavities but it is also controversial because of its high rates of shrinkage. On the other hand, in the study comparing elastic moduli and leakage, the microfill had the least leakage (Rundle et at. 1997) Furthermore, in the 1996 survey of the Reality Editorial Team, microfills were the clear choice for abfraction lesions. The purpose of this study was to evaluate the microleakage of 6 compostite resins (2 hybrids, 2 microfills, and 2 flowable composites) with and without load cycling. Notch-shaped Class V cavities were prepared on buccal surface of 180 extracted human upper premolars on cementum margin. The teeth were randomly divided into non-load cycling group (group 1) and load cycling group (group 2) of 90 teeth each. The experimental teeth of each group were randomly divided into 6 subgroups of 15 samples. All preparations were etched, and Single bond was applied. Preparations were restored with the following materials (n=15) : hybrid composite resin [Z250(3M Dental Products Inc. St. Paul, USA), Denfil(Vericom, Ahnyang, Korea)], microfill [Heliomolar RO(Vivadent, Schaan, Liechtenstein), Micronew(Bisco Inc. Schaumburg, IL, USA)], and flowable composite［AeliteFlo(Bisco Inc. Schaumburg, IL, USA), Revolution(Kerr Corp. Orange, CA, USA)]. Teeth of group 2 were subjected to occlusal load (100N for 50,000 cycles) using chewing simulator(MTS 858 Mini Bionix II system, MTS Systems Corp. Minn. USA). All samples were coated with nail polish 1mm short of the restoration, placed in 2％ methylene blue for 24 hours, and sectioned with a diamond wheel. Enamel and dentin/cementum margins were analyzed for microleakage on a sclale of 0 (no leakage) to 3 (3/3 of wall). Results were statistically analyzed by Kruscal-Wallis One way analysis, Mann-Whitney U-test, and Student-Newmann-Keuls method. (p = 0.05) Results : 1. There was significantly less microleage in enamel margins than dentinal margins of all groups (p＜0.05) 2. There was no significant between six composite resin in enamel margin of group 1. 3. In dentin margin of group 1, flowable composite had more microleakage than others but not of significant differences. 4. there was no significant difference between six composite resin in enamel margin of group 2. 5. In dentin margin of group 2, the microleakage were R＞A =H=M＞D＞Z. But there was no significant differences. 6. In enamel margins, load cycling did not affect the marginal microleakage in significant degree. 7. In enamel margins, load cycling did affect the marginal microleakage only in Revolution. (p＜0.05).