• The Korean Journal of Malacology
• /
• v.26 no.1
• /
• pp.19-31
• /
• 2010

Seogundo is a small island adjacent to the southern coast of Jeju Island and connected to it by a boulder beach at low tide Surveys of this area were conducted from 2001 to 2009 to enumerate the mollusks there and also to examine their diversity, relative abundance, and ecological relationships. Both the boulder beach itself and several large tide pools were studied, including the coarse sand substrate and several species of seaweed and coralline algae found in the tide pools. Of the 121 species obtained or observed, there were 97 gastropods, 16 bivalves, and 8 polyplacophorans. Live specimens were obtained for about half of those species. About one third were found on rocky substrate, with the most common species being Nodilittorina radiata and Nerita japonica in the upper intertidal zone, N. radiata and Littorina brevicula in the middle intertidal, and Turbo (Lunella) coronata coreensis and Acanthopleura japonica in the lower intertidal and shallow subtidal. The seaweeds and coralline algae contained about 40% of all mollusk species. The most common mollusks in two species of brown seaweed were Ittibittum parcum, Musculus nanus, and Euplica scripta. In a species of red seaweed, Komaitrochus pulcher was the most frequent, as in the coralline algae, along with M. nanus. The coarse sand in the tidepools contained about 25% of the species, with the Cerithiidae having the largest number. A sample of beach drift contained 17 species, with Bittium aleutaceum and Rissoina (Phosinella) pura being most common. Most species, about 60%, were found in a variety of habitats, especially the marine flora; few species exhibited any habitat preferences. Biographically, Jeju Island is part of the Warm Temperate Northwest Pacific Province and the East China Sea ecoregion with a strong faunal affinity with southern Japan, eastern China, and northeastern Taiwan. Zonal-geographical groupings reveal that the fauna is mainly subtropical-low boreal, preferring moderately warm water, with a somewhat smaller number of tropical-subtropical species.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.46 no.5
• /
• pp.626-637
• /
• 2013

We measured the grain size, ignition loss (IL), chemical oxygen demand (COD), acid volatile sulfide (AVS) and trace metals (Al, Fe, Cu, Pb, Zn, Cd, Cr, Mn, Hg, and As) of intertidal surface sediment collected from 11 islands (62 stations) in the southern region of Jeollanam Province. The objective of this research was to evaluate the organic matter and trace metals contaminations of sediments from coastal island tidal flats. Surface sediment texture was characterized as follows: mud, sandy silt, muddy sand, and slightly gravelly sand facies. The finer sediments are mainly dominated in the northern part of each island. The concentrations of IL, COD, AVS and some trace metals (Al, Fe, Zn, Cr, Cu, and Hg) were higher in the northwestern part of Wan Island and the area between Gogeum and Sinji Islands, and were associated with relatively finer sediment, as compared to other locations. The concentrations of Mn, Pb, Cd, and As were higher in the northwestern and southeastern parts of Geoguem and Pyungil Islands, but were not correlated with mean grain size. Based on sediment quality guidelines (SQGs), the concentrations of trace metals were lower than the values of effect range low (ERL), used in United States, and threshold effects level (TEL), used in Korea, with exception of As. Similarly, the intertidal sediments were moderately contaminated with As, based on the the enrichment factor (EF) and the geoaccumulation index ($I_{geo}$). The high concentration of As in intertidal sediments from this study region may be due to the input of naturally or artificially contaminated submarine groundwater, contaminated waste from seaweed aquaculture operations and/or land-based seaweed processing facilities. Further studies are needed to identify the sources of As in this study region, and to determine the effects of As contamination on coastal ecosystem.

• Asian Journal of Turfgrass Science
• /
• v.16 no.2
• /
• pp.75-83
• /
• 2002

The back-filled soil of the New Incheon International Airport construction site was reclaimed with sea sand in near the Young-Jong island. The primary study was carried out from August 1993 to June 1997 to study soil amendment and to select salt resistance turfgrass species. This study dealt with low maintenance area that included most part of open space of airport site. The second experiment, from October 1996 to August 1998, focused on soil amendment and selection of turfgrass species for alongside runway where turf area was maintained. Through two previous studies, propagation methods with zoysiagrass were tested for alongside runway and surrounding areas at 1998. The study of construction methods with zoysiagrass, vegetative propagation showed better results on visual quality and cover rating compare with seeding propagation. However, significant different between vegetative and seeding propagation was not showed on visual quality and drought tolerance after one year of plot establishment. The cover rating by seeding construction methods reached in excess of 70% of limitation suggested by the Incheon International Airport Cooperation. Zoysia net and sprigging net methods were the most suitable where there requires rapid and high rate of ground cover. Seeding propagation should be acceptable to obtain a resonable cover rating where there allows relatively longer period of completion. Therefore, it should be possible to attain a proper rating of ground cover on the site of open space, alongside runway or areas similar to the New Incheon International Airport which is being built on dredged seashore sand. However, the methods of soil amendment, selecting salt tolerance species, and proper construction procedure should be considered at the a time.

• Journal of Environmental Impact Assessment
• /
• v.11 no.4
• /
• pp.247-258
• /
• 2002

This study aimed at verifying the grain-sized distribution of surface deposits in a tidal flat using multi-spectral Landsat TM. In this study, we employed the grain-sized analysis, PCA and unsupervised classification techniques for analyzing the distribution of deposits. As a result in this study, the unsupervised classification method using PCA image was found to be most useful in classifying tidal flat deposits using satellite data. This method is considerably effective in analyzing not only the aspects of distribution in terms of accumulated deposits and erosion, but also the changes in seaside topography and shoreline. The grain-sized distribution analysis indicates that the mud flat inside the Cheonsu-bay tidal flat is distributed, the mixed flat located in the middle, and the sand flat distributed near the sea. The sand flat is dominant around the southern part of Seomot isle and its beach. On the other hand, the mud and mixed flat is dominant on the western part. Likewise, the western coast of Seomot isle and its beach is significantly affected by waves facing the offshore. However, the eastern side of the bay could be a site for the evolution of tidal flat made of fine materials where it is less affected by ocean waves. These results show that multi-spectral satellite data are effective for the classification of distribution materials and environmental impact assessment and continuous monitoring. In particular, the research on environmental deposits can provide important decision-supporting information for decision-making on seaside development, by analyzing the progress of deposits and environmental changes.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.481-484
• /
• 2008

Recently, the recycling and reusing of construction and demolition waste concrete is urgently required because waste concrete is greatly increased according to the rapid increasing of urban redevelopment project, but the problem solution for demand and supply unbalance of fine aggregate is urgently required because of the restriction of collecting sea fine aggregate. So the utilization of high quality recycled fine aggregate using construction and demolition waste concrete as new fine aggregate for construction industry is urgently. Accordingly, In this study, As recycled fine aggregate manufacturing technology with exceeding in economical efficiency, reduction efficiency of environmental load and quality improvement effect of recycled fine aggregate, it is to develop dry manufacturing system composed specific gravity separator of high-speed rotation impact type and centrifugal Force Powder Collector, etc. And it is to examine mechanism of recycled sand dry manufacturing system.

• Ocean Systems Engineering
• /
• v.2 no.3
• /
• pp.205-215
• /
• 2012

Recently, interest of offshore structure construction in South Korea is growing as the land space becomes limited for further development and the renewable energy grows to be more attractive for the replacement of the fossil energy. In order for the optimal construction of optimum offshore floating structures, development of safe and economical offshore foundation technologies is a priority. In this study, the large-deformation behavior of a suction pile, which markets are rapidly growing nowadays, is analyzed for three different loading locations (top, middle, and bottom of the suction pile) with three different displacement inclinations (displacement controlled with displacement inclinations of 0, 10, and 20 degrees from the horizontal). The behavior analysis includes quantifications of maximum resistances, translations, and rotation angles of the suction pile. The suction pile with its diameter of 10 m and height of 25 m is assumed to be embedded in clay, sand, and multi layers of subsea foundation. The soil properties of the clay, sand, and multi layers were determined based on the results of the site investigations performed in the West sea of South Korea. As analyses results, the maximum resistance was observed at the middle of the suction pile with the displacement inclination of 20 degrees, while the translations and rotations resulting from the horizontal and inclined pullouts were not significant until the horizontal components of movements at the loading points reach 1.0 m.

• Journal of the Korean earth science society
• /
• v.27 no.3
• /
• pp.328-340
• /
• 2006

In Janghwa-ri of Kanghwa Island morphological changes in four transects, 112 surface, and 2 core sediments were analyzed to understand the seasonal variation of the muddy tidal-flat environment. Sedimentary of facies can be classified into four facies; sand, muddy sand, sandy mud, and silt. During winter, the coarse-grained sediment facies expanded seaward. In the subsurface part of the core sediments, poorly sorted silty sediments dominate the area. According to the Pb-210 isotope analysis, accumulation rates of the tidal flat in Jangwha-ri appear to be $5{\sim}19mm/yr$. In the study area, the result is suggestive of a rapid change in depositional environments in recent years.

• Journal of the Korea Institute of Building Construction
• /
• v.18 no.3
• /
• pp.219-225
• /
• 2018

The aim of the research is improving the quality of concrete by using the alternative aggregate resources and recycling wastes. To make a combined aggregate fitted in standard particle size distribution curve, crushed sand from blasted rock debris was used as a base aggregate. Additionally, to increase the portion of fine particles, sea sand was mixed. Although these aggregate combination fit the standard particle size distribution curve, in this research, raw coal ash was replaced as a microfine. According to the experiment, by replacing 5% raw coal ash, the most favorable results were achieved in aggregate gradation and cement mortar quality.

• Journal of the Korean association of regional geographers
• /
• v.12 no.3
• /
• pp.339-351
• /
• 2006

The purpose of this study is to investigate and analyze the relationships between tidal cycles, surface landforms, and sediments of tidal flats and their resident life. The study areas are Uengdo Ri in the Garolim Bay with wide the mud flat, Doou Ri in the Youngwang tidal flat which is developed sand flat and salt field, and Gomso Bay which is developed aquaculture industry. For resident around tidal flats, sea working takes precedence over farming, and main earnings gets from tidal flats. Resident life around the tidal flats is deeply related to tidal cycles, and low water level of spring tide becomes, they are most active and get more earnings than usual day, so it seems to be periodic markets. It is usually developed shellfish aquafarms in the mud flat, the stow net fishery in the sand flat, and salt fields in the mixed flat near the coast. Also a tidal flat has specialization of economic activity, and is divided into salt field and fish-farming in the supratidal zone, shellfish aquafarm in the intertidal zone, and oyster and porphyra culture in the subtidal zone.

• Economic and Environmental Geology
• /
• v.49 no.3
• /
• pp.225-242
• /
• 2016

Rock physics serves as a useful tool for seismic reservoir characterization and monitoring by providing quantitative relationships between rock properties and seismic data. Rock physics models can predict effective moduli for reservoirs with different mineral components and pore fluids from well-log data. The distribution of reservoirs and fluids for the entire seismic volume can also be estimated from rock physics models. The first part of this report discusses the Voigt, Reuss, and Hashin-Shtrikman bounds for effective elastic moduli and the Gassmann fluid substitution. The second part reviews various contact models for moderate- to high-porosity sands. In the third part, constant-cement model, known to work well for the sand that gradually loses porosity with deteriorating sorting, was applied to the well-log data from an oil field in the North Sea. Lastly, the rock physics template constructed from the constant-cement model and the results from the prestack inversion of 2D seismic data were combined to predict the lithology and fluid types for the sand reservoir of this oil field.