• 한국신재생에너지학회:학술대회논문집
• /
• 2007.06a
• /
• pp.493-496
• /
• 2007

Korean Institute of Geosciences and Mineral Resources (KIGAM) has studied on gas hydrate in the Ulleung Basin, East sea of Korea since 1997. Most of all, a evidence for existence of gas hydrate, possible new energy resources, in seismic reflection data is bottom simulating reflection (BSR) which parallel to the sea bottom. Here we conducted the conventional data processing for gas hydrate data and Kirchhoff prestack depth migration. Kirchhoff migration is widely used for pre- and post-stack migration might be helpful to better image as well as to get the geological information. The processed stack image by GEOBIT showed some geological structures such as faults and shallow gas hydrate seeping area indicated by strong BSR. The BSR in the stack image showed at TWT 3.07s between shot gather No 3940 to No 4120. The estimated gas seeping area occurred at the shot point No 4187 to No 4203 and it seems to have some minor faults at shot point No 3735, 3791, 3947 and 4120. According to the result of depth migration, the BSR showed as 2.3km below the sea bottom.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.7 no.3
• /
• pp.148-156
• /
• 2002

The coastline of Hampyung Bay, southwestern coast of Korea, was examined and measured in the field for the understanding of geomorphic changes and sea-cliff erosion processes. The Hampyung-Bay coastline is characterized by steep-face slope and soft soil and/or intensively weathered rock composition. Saw teeth-shaped coastline, and relict weathered basement-rock and "Island Stack" exposed on the beach surface are peculiar geomorphic features indicating active sea-cliff erosion. The coastline in the study area is continuously retreating with the following cyclic process: erosion of cliff base, gravitational landslide or mass wasting, formation of talus, and then erosion and removal of talus. In this study, sea-level rise during summer in the west coast of Korea is suggested as one of the key factors fur the removal of soil taluses and, thereby, accelerating sea-cliff erosion.f erosion.

• Journal of The Geomorphological Association of Korea
• /
• v.27 no.4
• /
• pp.53-70
• /
• 2020

Silgyeong sansuhwa (Realistic landscape paintings) are drawn in Korea since 17th century. It has characteristics of more realistic description of landscape than painting from previous periods. Kim Hong Do's 'Haedong Myeongsan docheop (The album of paintings of famous mountains in Korea)' has been recognized as fine example of realistic description of geomorphic landscapes. Kim Hong Do and Kim Eung hwan did official travel to Gwandong and Geumgangsan area by order of King Jeongjo in 1788. As a result of that travel they draw about 100 piece of landscape painting. About 60 pieces of the paintings are still remaining. These are open to public by Korea National Museum in 1996. 14 pieces of painting, Daegwanryeong and Gangneung, Gyeongpo-dae, Hohae-jeong, Gahak-jeong, Cheonggan-jeong, Mun-am, Mangyang-jeong, Wolsong-jeong, Neungpa-dae, Naksan-sa, Mureung-gye, Gyejo-gul, and Hyeonjong-am, are analysed in this study. Coastal depositional landforms, like lagoon, sand beach and spit or barriers, erosional forms, like sea stack, sea cliff and sea cave, depicted in the paintings are analysed. In addition, structural landforms, colluvial landform and bedrock incision form by the running water in mountain area were analysed and weathered forms of granite and excursion to karst cave also discussed. It is found that sea arch in the printing destroyed since 1788, though exact position and reason is still unknown. There are strong need for discovery and identification of geomorphic landscape resources, for applied geomorphological studies and for prepare educational materials for non-face-to-face education. It also be emphasized that it can be used of the course work materials for future education using augmented reality and virtual reality technology.

• Journal of the Korean Society of Earth Science Education
• /
• v.13 no.1
• /
• pp.110-120
• /
• 2020

It is generally reported that field learning and a class using regional materials motivate learning and give a positive effect on learning of geology unit, science subject. The purpose of this study is to develop and to suggest regional materials for learning of geology unit, science subject at Jaeundo. The results of this study are as follows. Regional materials were developed at three locations (namjin dockyard area, yangsan beach area and dunjang beach area) of the study area. Namjin dockyard area (A site) is composed of terrain of sea cliff, sand beach and mud flat. Sedimentary rocks, weathering phenomenon of rocks and strata of various shape are distributed in sea cliff of A site. Yangsan beach area (B site) is composed of coastal terrain as sea cliff and sand beach about 1.5km long. Sedimentary rocks and rhyolite are distributed in sea cliff of B site. Tafoni formed by weathering process of rocks are developed on sedimentary rock outcrop of B site. Dunjang beach area (C site) is composed of coastal terrain of sea cliff, sand beach about 2km long and sea stack. Stratified sedimentary rocks are distributed in sea cliff of C site. Sea stack located in near halmi island on the west side of dunjang beach area is a good sample showing erosion process of sea cave for a long time. Unique geomorphology and geology phenomena distributed in 3 sites at Jaeundo can be used as regional materials for learning of geology unit, science subject. And, Regional materials shall be used in conjunction with the text book data of geology units. These 3 sites of the study area are worth using as field learning course for elementary and middle school students.

• 한국신재생에너지학회:학술대회논문집
• /
• 2006.06a
• /
• pp.377-381
• /
• 2006

A seismic survey for gas hydrate have performed over the East sea by the KIGAM since 1997. General indicator of gas hydrate in seismic data is commonly inferred from the BSR(Bottom Simulating Reflector) that occurred parallel to the sea floor, amplitude decrease at the top of the BSR, amplitude blanking at the bottom of the BSR, decrease of the interval velocity and the reflection phase reversal at the BSR. In this paper we had analyzed optimum parameters of the field data to detect the 9as hydrate. Shot delay correction is applied 95ms, spherical divergence correction is applied velocity library 3, bandpass filter is applied 25-30-115-120Hz deconvolution operator length is applied 60ms, lag is 6ms and accurate velocity analysis NMO correction, stack is performed. Geobit 2.11.0 developed by the KIGAM was used for all data processing. Processing results say that the BSR occurred parallel to the sea floor were shown at 3,150m/s of two way travel time from the sea floor through shot point 5,000-5,610, and identified the interval velocity decrease around BSR and the reflection phase reversal corresponding to the reflection at the sea floor.

• Journal of Korean Society for Atmospheric Environment
• /
• v.16 no.E2
• /
• pp.97-103
• /
• 2000

A Thermal Internal Boundary Layer(TIBL) develops over the landside from the coast due to the surface temperature difference between the land the sea when sea breeze froms. The TIBL plays an important role in determining the pollutant concentrations where the plume emitted from a tall stack near the coast fumigates to the ground. The fumigation results in the high ground the TIBL height from the available meterological data is very important. The TIBL models avaliable in the literature were analyzed to identify the suitable model to apply in the fumigation. The TIBL heights predicted by the existing models were compared with the measurements in the water tank experiment. The results show that the TIBL models by Raynor is appropriate to predict the height of TIBL.

• Economic and Environmental Geology
• /
• v.39 no.6 s.181
• /
• pp.711-717
• /
• 2006

In order to study gas hydrate, potential future energy resources, Korea Institute of Geoscience and Mineral Resources has conducted seismic reflection survey in the East Sea since 1997. one of evidence for presence of gas hydrate in seismic reflection data is a bottom simulating reflector (BSR). The BSR occurs at the interface between overlaying higher velocity, hydrate-bearing sediment and underlying lower velocity, free gas-bearing sediment. That is often characterized by large reflection coefficient and reflection polarity reverse to that of seafloor reflection. In order to apply depth migration to seismic reflection data. we need high performance computers and a parallelizing technique because of huge data volume and computation. Phase shift plus interpolation (PSPI) is a useful method for migration due to less computing time and computational efficiency. PSPI is intrinsically parallelizing characteristic in the frequency domain. We conducted conventional data processing for the gas hydrate data of the Ease Sea and then applied prestack depth migration using message-passing-interface PSPI (MPI_PSPI) that was parallelized by MPI local-area-multi-computer (MPI_LAM). Velocity model was made using the stack velocities after we had picked horizons on the stack image with in-house processing tool, Geobit. We could find the BSRs on the migrated stack section were about at SP 3555-4162 and two way travel time around 2,950 ms in time domain. In depth domain such BSRs appear at 6-17 km distance and 2.1 km depth from the seafloor. Since energy concentrated subsurface was well imaged we have to choose acquisition parameters suited for transmitting seismic energy to target area.

• Journal of The Geomorphological Association of Korea
• /
• v.19 no.4
• /
• pp.39-57
• /
• 2012

The volcanic edifice of Ulleungdo is largely divided into a shield volcano underwater and a tholoide above seawater. The geological features of the volcano above seawater are basically alkali volcanic rocks that are further divided into five geological strata: agglomerates and tuffs trachyte and phonolite trachytic pumice trachyandesite, and sedimentary layer. The topography of Ulleungdo consists of volcanic landform on the whole, and such volcanic landform is weathered and eroded into various weathering landform, stream landform, coastal landform, structural landform, etc. Major volcanic topography includes caldera basin, central cone, and columnar joint, whereas weathering topography features, tafoni, gnamma, tor, weathered cave, talus, etc. In major coastal topography are sea cliff, wave-cut platform, sea stack, sea arch, sea cave, shingle beach, coastal terrace, etc. For stream topography, its development is minimal except for waterfalls.

• Journal of the Korean earth science society
• /
• v.26 no.6
• /
• pp.584-596
• /
• 2005

Morphology, surface sediments, sedimentation rates and sea-cliff erosion have been monitored, for one year to investigate the shoreline changes and tidal beach characteristics in Cheonsu Bay along the west coast of Korea. The seacliff of the bay consists of intensively weathered sedimentary rocks and soft soil, showing an erosion range of $-58.9\~73.3cm/yr$ by a weak wave forcing. Active sea-cliff erosions are recognized by peculiar geomorphic features, including saw teeth-shaped coastline, gravels, relict weathered basement-rock and 'Island Stack' exposed on the high-tide beach surface. The beach sediments show low compositional maturity at the south and north headlands and gradually high towards the central part. This observation seems to be caused by the fact that beach sediments are to originate from the both headlands in the study area and then transported by long-shore current associated with a wave action.

• KEPCO Journal on Electric Power and Energy
• /
• v.2 no.4
• /
• pp.589-593
• /
• 2016

Microbial fuel cell (MFC) can produce electricity from oxidation-reduction of organic and inorganic matters by electrochemically active bacteria as catalyst. Stacked MFCs have been investigated for overcoming low electricity generation of single MFC. In this study, two-typed stacked-MFCs (submerged-flat and stand-falt) were operated according to electrode connection for optimal stacked technology of MFC. In case of submerged-flat MFC with all separator electrode assembly (SEA) sharing anode chamber, MFC with mixed-connection showed more voltage loss than MFC with single-connection method. And MFC stacked in parallel showed better voltage production than MFC stacked in series. In case of stand-flat MFC, voltage loss was bigger when SEAs sharing anodic chamber only were connected in series. Voltage loss was decreased when SEAs parallel connected SEAs sharing anodic chamber were connected in series.