• 한국환경생태학회지
• /
• 제24권2호
• /
• pp.209-221
• /
• 2010

본 연구는 해안 염해지 수목 식재를 위한 내염성 및 내조성 수종을 선발하고자 한국 서해안 해안림의 식생조사와 토양염분도를 조사 분석하였다. 조사지의 토양염분은 전체 평균 $EC_{1:5}$ 0.11dS$m^{-1}$이었고, 최저 0.00dS$m^{-1}$, 최고 0.68dS$m^{-1}$이었다. 토양염분($EC_{1:5}$)은 해안 정선으로 부터 내륙 방향으로 갈수록 낮았으며, Ⅰ지대>Ⅱ지대>Ⅲ지대>Ⅳ 지대 순으로 각각 $EC_{1:5}$ 0.14dS$m^{-1}$, 0.11dS$m^{-1}$, 0.10dS$m^{-1}$, 0.08dS$m^{-1}$이었다. 출현한 자생식물은 52과 104속 24변종 157종 총 181분류군이었다. 토양염분이 가장 높은 단계인 $EC_{1:5}$ 0.51dS$m^{-1}$를 초과하는 곳에서 EC의 특이값 또는 이상치의 수준으로 여러 번 출현하는 수종은 곰솔, 청미래덩굴, 떡갈나무, 졸참나무 등이었다. $EC_{1:5}$ 0.41~0.50dS$m^{-1}$에서는 $EC_{1:5}$ 0.40dS$m^{-1}$ 이하에 속하는 식물들 이외에도 왕자귀나무, 멀구슬나무, 계요등으로 출현빈도가 매우 낮았다. 전체 지대에 출현하는 수종은 리기다소나무, 소나무, 곰솔, 노간주나무 등 이었고, 중요도가 높은 수종은 소나무, 곰솔, 이대, 청미래덩굴, 굴피나무 등이었다. 이러한 수종은 조사지의 자생 수종들 중에서 다른 수종에 비하여 상대적으로 내조성이 강한 것으로 판단되었다.

• 한국문화재보존과학회:학술대회논문집
• /
• 한국문화재보존과학회 2004년도 제19회 발표논문집
• /
• pp.78-91
• /
• 2004

염(Salts)은 일반적으로 가장 강력한 풍화요인 물질 중 하나이다. 염의 결정화(crystallization) 및 수화(hydration)작용은 석재의 화학적 풍화 뿐만이 아니라 물리적 풍화를 가속화 시킨다. 감은사지 석탑은 오랜 세월 대기 중에 노출되어 대기환경오염으로 인한 화학적 풍화 뿐만이 아니라 지리적으로 바다에 인접해 있어 바다에서 기원한 염화나트륨(NaCl)의 영향으로 다른 석조물에 비해 심한 물리적 풍화현상을 보이고 있다. 편광 현미경 및 SEM, XRD, XRF를 이용하여 석탑의 구성석재 및 염(salts)에 대한분석을 실시하였으며, 용출실험을 통해 얻은 용액에 대해서는 IC와 ICP-AES를 이용하여 분석하였고, 염류와 석재의 반응산물로 만들어진 염에 대해서는 정방위시료와 부정방위시료를 제작하여 분석하였다. 감은사지 석탑을 이루는 암석은 결정응회암으로 주 구성 광물은 사장석 및 정장석이며 소량의 석영 및 흑운모 등이 함유되어 있고 소량의 유리질 석기로 구성되어 있다. 석재의 표면에는 주 구성 광물들의 화학적 풍화로 인해서 생성된 2차 광물로 팽창성 점토광물인 스멕타이트가 존재하며, 대기오염물질과의 결합에 의해 생성된 대표적인 황산염인 석고$(gypsum,\;CaSO_4{\cdot}2H_2O)$, 소금(halite, NaCl), 해양기원 염류인 소금성분과 대기오염물질이 만들어낸 테나다이트$(thenardite,\;Na_2SO_4)$가 존재한다. 이들 염류는 일차적으로 암석의 표면에 백화현상을 초래하기도 하고, 대기 중의 오염물질과 결합하여 일부는 흑화현상을 보이기도 한다. 또한 암석 내 수분이 증가할 경우 이들 염들이 암석의 공극이나 열극을 따라 내부로 이동하여 subflorescence를 발생시켜 박락 및 박탈의 원인이 되었으며, 온도와 수분의 변화에 따른 이들 염(salts)의 수화 및 결정 작용 그리고 새로운 염(salts)의 침전작용을 반복하면서 석재 내부와 외부의 암석 및 결정에 균열과 미세열극 등이 생성되어 석재 자체의 구조적 안정성에 영향을 주고 있다. 따라서 감은사지 석탑은 지리적 환경 차이로 인해 일반적인 환경의 석조물들과는 다른 형태의 풍화양상을 보이고 있어서 풍화양상 및 풍화형태에 대한 정확한 연구와 이해를 바탕으로 보존대책이 마련되어야 한다.

• 자원환경지질
• /
• 제34권2호
• /
• pp.175-192
• /
• 2001

동해안 울진 지역 천부 지하수의 수리지구화학 자료에 대하여 지구통계 분석(이원배치 분산 분석, 군집 분석, 요인 분석)을 수행함으로써, 수질 자료와 오염 특성의 시간적.공간적 변화 양상을 규명하고 대수층에서 일어나는 주요 반응을 고찰하였다. 이원배치 분산 분석 결과, 광역적 수질 특성은 8개 수계분지를 따라 유의한 공간적 변화를 보여주지 않았으나, Ca, HCO$_3$,SO$_4$등 일부 이온종은 수계분지별로 의미 있는 변화를 나타내었다. 시료 채취시기에 따른 계절 변화는 SO$_4$를 제외하고는 인지되지 않았다. 그러나 군집 분석 결과, 수리지구화학 특성의 변화는 해안으로부터의 거리에 따라 아주 잘 설명될 수 있음을 지시하였다. 요인 분석 결과, 연구 지역 천부 지하수의 수리지구화학 특성은 다양한 요인에 의해 지배됨을 확인하였다. 중요 순서로 그 요인을 나열하면, 1) 물-암석 반응(주로 탄산염 광물의 용해), 2) 바다에서 기원한 해염의 혼입, 3) 비료와 각종 농화학 약품에 의한 오염으로 밝혀졌다.

• 대한조선학회 특별논문집
• /
• 대한조선학회 2015년도 특별논문집
• /
• pp.50-55
• /
• 2015

Application of newly conceptualized Anti-Splash Devices designed for COT vent pipes were studied on a P/V valve located on the upper deck of an oil carrier vessel. Anti-Splash devices are used in the shipbuilding industry in order to avoid oil overflow and spray accidents caused by excess pressure and vacuum condition in the cargo oil tanks. These conditions are caused by the transverse and longitudinal sloshing forces that arise from ship motion during sea voyages. The main issue with existing Anti-Splash device model is flux at the outlet of the Anti-Splash Device, and so, new conceptual models for the Anti-Splash device were developed and compared to existing Anti-Splash device model using CFD analysis. Transient analysis was used to capture the flow and velocity of each model and a comparative analysis was performed between old and new-concept models. This data was used to determine the optimal design parameters in order to develop an optimized Anti-Splash Device. A Factory acceptance test was performed on the new-concept models in order to verify the performance and efficiency against their design requirements and other criterion. The final step performed was to apply the optimized Anti-Splash Device models for COT vent pipes to an actual vessel and verify performance through a seawater cargo operation during a sea voyage as per the ship owner's request. The patent for the aforementioned device was obtained by the Korean Intellectual property Office dated Dec. 18th,2014.

• Corrosion Science and Technology
• /
• 제8권5호
• /
• pp.203-207
• /
• 2009

Electrochemical methods have been widely used to study the performances and mechanisms for the degradation of organic and inorganic coatings. In this study, EN(Electrochemical noise) measurement was applied to the protective properties and review the parameters analyzed noise signals in the time and in the frequency domain for epoxy resin based coated steels during exposure to hot sea water($40^{\circ}C$) and salt spray for 200 days. It was also found that $R_n$(Noise resistance), $R_{sn}$($f_{min}$)(Spectral noise resistance) and 2H(Hurst exponent) represented the performance of epoxy coated steels. $R_n$ can be determined as the ratio of the standard deviations of potential and current noise signals and is decreased to exposure time. Data qualities can be easily checked by PSD(Power Spectral Density) plot and $V_{psd}$, $I_{psd}$ and $R_{sn}$($f_{min}$) is useful to research the protective performances and mechanisms of coated steels. Hurst exponent represents the degradation of coated steels. But, it is difficult to directly apply the protective criterion to the evaluation of epoxy coated steels used the shipbuilding processes.

• Food Science and Biotechnology
• /
• 제17권3호
• /
• pp.508-513
• /
• 2008

Erythromycin has been used to treat Streptococosis, Edwardsiel1osis, Vibriosis, Bacterial enteritis in the cultured fish. In this study, a rapid and effective erythromycin analysis method with new sample treatment protocol and liquid chromatography/tandem mass spectrometry (LC/MS/MS) system for fish products was developed. For the erythromycin extraction from fish muscle, the solvent mixture composed of 0.2% meta-phosphoric acid and methanol (6:4) showed good recovery rate, and the optimum extraction solvent volume was 20 mL. Erythromycin detection using LC/MS/MS were carried out under electro spray ionization (ESI) positive condition and erythromycin mass value 576.2 and 157.9. And the detection limit of the established method was 0.005 mg/kg in fish products. The recovery rate of the developed method applied to the fish species were as following, olive flounder, $87.6{\pm}5.0%$; black rockfish, $87.2{\pm}6.4%$; eel, $85.2{\pm}4.8%$; and rainbow trout, $86.0{\pm}6.2%$. In the established method in this study, the correlation of coefficient values ($R^2$) of erythromycin calibration curve (n=11) was 0.9998.

• 한국해양공학회지
• /
• 제21권4호
• /
• pp.61-65
• /
• 2007

In this research, we have developed a manufacturing process for seawater salt by horizontal spray drying technique using the deep ocean water and seaweed(sea tangle). Deep ocean water, strong acidic electrolyzed water and strong alkaline electrolyzed water were used as extraction solvent of seaweed. Sodium content in seaweed extract solution by strong alkaline electrolyzed water was 1.63(mg/g), which was 3.5 times lower than of seaweed extract by strong acidic electrolyzed water. Major mineral content(Na, K, Ca) in seawater salt by deep ocean water were higher than strong acidic electrolyzed water and strong alkaline electrolyzed water. On the contrary, Mg contents in seawater salt by deep ocean water were lower than strong acidic electrolyzed water and strong alkaline electrolyzed water. Based on the results of seawater salt production using seaweed, it is possible to make law-salt efficiently.

• Ocean and Polar Research
• /
• 제24권3호
• /
• pp.279-287
• /
• 2002

Successive 24 snow samples, collected from a 1.2m snow pit at a site on the summit of Main Dome in King George Island, Antarctic Peninsula, were measured for heavy metals such as Pb, Cd, Cu, and Zn and other chemical species. The mean concentrations of heavy metals are 3.48pg/g for Pb, 0.10pg/g for Cd, 16.6 pg/g for Cu and 15.8 pg/g for Zn, respectively. Pb and Cd concentrations observed in our samples are very comparable to those reported for recent snow at other Antarctic sites, while Zn and Cu levels are much higher than those at other sites. The annual fallout fluxes of all heavy metals approximately calculated are, however, much greater in King George Island than at other sites. With respect to the estimates of natural contributions, sea salt spray is found to be a major contributor to Cd and Zn inputs to the snow and minor to Cu inputs. On the other hand, the anthropogenic input can account for a large part of Pb concentrations. A tentative estimate represents that local emissions could be responsible for more than half of the excess Pb flux to the snow in King George Island.

• 한국건축시공학회지
• /
• 제3권4호
• /
• pp.103-109
• /
• 2003

Reinforced concrete structures under sever conditions such as marine structures, bridges and structural constructed with aggregated(dredged front sea). can be deteriorated from corrosion of the reinforcing bars. The purpose of this study is to evaluate the corrosion reflectance of coated steel using polymer dispersion and polymer cement slurry. Polymer dispersion and polymer cement slurry with various polymer types were coated to the surface of bars and steel plate, and tested for accelerated corrosion tests. Tests include adhesion in tension, bending test, chloride ion spray, penetration of NaCl 10％ solution and carbonation. From the test results, the corrosive resistance of steel is considerably improved by using polymer dispersion and polymer cement flurry at surface of steel. The difference of the corrosive resistance is hardly recognized according to types of polymer dispersion. The coated steel using polymer dispersion and polymer foment slurry will be improved to a great extent compared to those of plain steel when increasing content of chloride ion in cement concrete.

• 한국기계가공학회지
• /
• 제20권9호
• /
• pp.76-83
• /
• 2021

This study examines the characteristics of spraying conditions based on the change in standoff distance during fine particle spraying while measuring the surface roughness, maximum depth, and maximum width of the sprayed surface. The processing shape of the sprayed surface is analyzed to understand the effects of injection pressure, nozzle diameter, standoff distance, processing shape, processing cycle, processing speed, and injection particles, which are the main factors of fine particle injection processing. Based on the derived characteristics, we attempt to determine the interrelationships of these major factors. The standoff distance is set as a variable factor and a spray machining experiment using a hexagonal shape (from among polygons) instead of square and circular shapes is conducted. Results reveal that research on the characteristics of spraying conditions could be expanded based on changes in the shapes of workpieces.