• Proceedings of the Korea Institute of Applied Superconductivity and Cryogenics Conference
• /
• 2000.02a
• /
• pp.85-88
• /
• 2000

Cu-free Bi-Sr-Ca-O powder mixtures were screen-printed on Cu tapes and heat-treated at 850-$870^{\circ}C$ for several minutes in air, oxygen, nitrogen and low oxygen pressure. Cu-free precursors were composed of Bi_{x}$SrCaO_{y}$ (x=1.2-2). In order to obtain the optimum heat-treatment condition, we studied on an effect of the precursor composition, the printing thickness and the heat-treatment atmosphere on the superconducting properties of Bi2212 films and the reaction mechanism of their rapid formation. Microstructures and phases of thick films were analyzed by optical microscope and XRD. The electric properties of superconducting films were examined by the four probe method. At heat-treatment temperature, the thick films were in a partially molten state by liquid reaction between CuO in the oxidized copper tape and the precursors which were printed on Cu tapes.

• Proceedings of the KIEE Conference
• /
• 2007.04a
• /
• pp.29-31
• /
• 2007

In this paper we propose an directional analytic approach in image data space for X-ray image which is detected from the X-ray projection system. Such a radiographic nondestructive testing has long been used for steel-tube inspection and weld monitoring. The welded area and thickness of steel-tube are detected from gradient radiating mechanism based on the evaluation of biased X-ray source position. The welded area is an ellipse type on low contrast X-ray image including noise. Noise originates from most of elements of the system. such as shielding CCD camera, imaging screen, X-ray source, inspected object, electronic circuits and etc.. Projection incorrectness and noise influence on imaging quality is to be represented by vertical pixels' distribution. Space analysis due to vertical direction also shows the segmental possibility between regions by visual edge evaluation.

• Proceedings of the KIEE Conference
• /
• 2007.04a
• /
• pp.32-34
• /
• 2007

The X-ray projection system has long been used for steel-tube inspection and weld monitoring. The thickness of tubes and welded areas is based on the evaluation of radiographic shadow projections. The traditional tangential measurement estimates the distance of border lines of the projected wall shadows of a tube onto a radiographic image detector. The detected image in which although there is a variety of noise may be sectioned into several partitions according to its specific blocks. Imaging noise originates from most of elements of the system, such as shielding CCD camera, imaging screen, X-ray source, inspected object, electronic circuits and etc. The tangential projection incorrectness and noise influence on imaging quality. In this paper we first sectionalize the X-ray image on the basis of vertical contrast difference. And next functional and statistic analysis are carried on at each region. Geometrical distance and unsharpness of the edge caused by visual evaluation uncertainties are also discussed.

• Proceedings of the KSME Conference
• /
• 2000.04b
• /
• pp.148-153
• /
• 2000

An experimental study was conducted to investigate an isothermal characteristics of the condenser surface of disk type heat pipe using PF 5060 and FC 40 as working fluids. Desired temperature range at the condenser surface was $90^{\circ}C{\sim}130^{\circ}C$, which was cooled by natural convection. The operating temperature, the height of vapor space, the wall thickness of condenser, and the existence of a wick structure were considered as experimental factors. The temperature difference and the temperature fluctuation at the condenser surface were analysed to describe the performance of the heat pipe.

• Proceedings of the KIEE Conference
• /
• 2002.07c
• /
• pp.1504-1506
• /
• 2002

$(Ba_{0.6-x}-Sr_{0.4}Ca_x)TiO_3$ (x=0.10, 0.15, 0.20, y=$0.0{\sim}3.0$) powders were fabricated by the sol-gel method, and BSCT thick films were fabricated by the silk-screen printing method. Their structural and dielectric properties were investigated with variation of composition ratio. All BSCT thick films showed a homogeneous structure without presence of the second phase. BSCT film thickness, obtained by three cycle of printing, was approximately $80{\mu}m$. The dielectric constant and dielectric loss of the 3-coated BSCT(50/40/10) thick film were approximately 1700 and 0.07%, respectively.

• Journal of the Korean Wood Science and Technology
• /
• v.24 no.2
• /
• pp.42-45
• /
• 1996

A residue from the newsprint waste was investigated as a filler in adhesive for bonding southern pine plywood. The residue was prepared by drying the wet residue to 8% moisture content and grinding the dry material using a laboratory Wiley mitt with a 75-${\mu}m$(200-mesh) screen. The residue was compared to a commercial filler commonly used in structural plywood adhesives. A total of 48 three-ply panels. 12.7mm nominal thickness and 0.3 by 0.3 m in size, were fabricated at two press times(4 and 5 min) and three assembly times(20, 40 and 60 min). Evaluations of the residue were carried out by performance tension shear tests after two 4-hour boil accelerated aging tests on plywood. The test results included tension shear strength and estimated wood failure values. All plywood made with the residue filler were comparable to the control-bonded plywood. These results indicate that residue from the newsprint waste streams would be suitable as filler for plywood adhesives.

• Journal of KSNVE
• /
• v.5 no.1
• /
• pp.123-132
• /
• 1995

The microphonic phenomenon in TV(television) is a phenomenon that a stained pattern locally appears in the screen or moves like waves. This can be observed when audio signal of TV has specific frequencies under loud volume of sound. In this study, microphonic phenomenon has been investigated, and two practical ways of circumventing this has been proposed. Based on modal analysis of several TV parts(Cathod Ray Tube, shadowmask, etc.), it was proved that the microphonic phenomenon is caused by the resonance of the shadow mask. One of the proposed ways to circumvent this phenonenon is increasing the thickness of the frame, the other is removing the middle welding points between the frame and the shadow mask. The effects of these modifications are evaluated by the finite element analysis, and the results show that the magnitude of vibration of shadow mask reduced by 10 - 20dB, which is large enough to provent microphonic phenomenon even under maximum level of sound volume.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.11a
• /
• pp.338-341
• /
• 2002

$(Ba_{1-x}Sr_{0.4}Ca_x)TiO_{3}$ (x=0.10, 0.15, 0.20) powders were prepared by the sol-gel method and BSCT thick films were fabricated by the screen-printing method. Their structural and dielectric properties were investigated with variation of composition ratio and $Al_{2}O_{3}$ doping contents. As results of the X-ray diffraction and microstructure analysis, the grain size of BSCT thick films was decreased with increasing $Al_{2}O_{3}$ amount. The thickness of BSCT thick films by 4-coating/drying is about $110{\sim}120{\mu}m$. The tunability increased with decreasing Ca content, and the BSCT(50/40/10) specimen doped with 1.0wt% $Al_{2}O_{3}$ showed the highest value of 12.94% at 5kV /cm.

• Journal of Electrical Engineering and information Science
• /
• v.3 no.2
• /
• pp.245-250
• /
• 1998

Novel fabrication process of vertical spring for micro mirror array is proposed. The proposed fabrication process adopts a shadow evaporation process using shielding screen structure on top of the sacrificial layer. The 50${\times}$50 micro mirror arrays are fabricated using the proposed process and ceramic packaged. The static and dynamic characteristics of mirror are measured. The mirror plate touches substrate at 16V and the response time of about 16.8 ${\mu}\textrm{s}$. The resonant frequency of mirror is 16kHz. The spring thickness is calculated from static characteristic to be 1075${\AA}$.

• Proceedings of the KIEE Conference
• /
• 2005.07c
• /
• pp.1915-1917
• /
• 2005

PZT(40/60) and PZT(60/40) powders, prepared by the sol-gel method, were mixed with an organic vehicle and the PZT(40/60)/PZT(60/40) heterolayered thick films were fabricated by the screen-printing method on $Pt/Al_2O_3$ substrates. The structural properties such as DTA, X-ray diffraction and microstructure, were examined as a function of the applied pressure. In the DTA analysis, the formation of the polycrystalline perovskite phase was observed at around $880^{\circ}C$. The average thickness of the PZT heterolayered thick films which were coated five times was approximately $95-100{\mu}m$.