• Journal of the Korean Institute of Intelligent Systems
• /
• v.21 no.4
• /
• pp.481-486
• /
• 2011

Recently, most presentations have been presented on the screen using the computer. This paper suggests that the computer can be controlled by the gesturing recognition, without the help of any person or tools. If we use only information in the form of images, we should have a high-resolution camera for capturing the images and a computer that can treat high-resolution images. However, this paper will present a solution whereby a low-resolution camera can be used at the stage. It uses the supersonic sensor to trace the presenter's location and a low-resolution camera for capturing the necessary limited and small area. The gesture is defined by the number of fingers and one's hand positions which are recognized by the Erosion / Dilation and Subtraction algorithm. The system this paper addresses has improved 13%, when comparing tests between the image-only data system and this paper's system. The gesture recognition tests have a 98% success rate.

• Journal of Veterinary Clinics
• /
• v.20 no.1
• /
• pp.7-11
• /
• 2003

The selection of a test as a reference with no perfect sensitivity and specificity may lead to bias, yielding distortion of the diagnostic performance. This means it is inappropriate to use imperfect diagnostic tests as a reference method to identify infected patients in clinical environments. In this study, diagnostic performance of rapid urease test, polymerase chain reaction (PCR), and histology of gastric biopsy specimens for diagnosing Helicobacter pylori infection separately and in combination was estimated by using non-linear regression. Based on this approach, the sensitivity, specificity and likelihood ration positive and negative values for each test were as follows: urease test 99.9%, 99.9%, 99.9%, 99.6%, respectively; PCR 88.6%, 99.9%, 99.9%, 70.5%, respectively; histology 78.3%, 97%, 78.3%, 97%, respectively. Predictive values for positive and negative changes with varying Combination of three diagnostic tests employed in the study gives no substantial benefit for practitioners to screen infected patients, and urease test or PCR represents an appropriate single test in clinical environments.

• Archives of Pharmacal Research
• /
• v.20 no.2
• /
• pp.110-114
• /
• 1997

This research was performed to screen the cytotoxic activities of some pharmaceutical insect relatives. Cytotoxic activities of total extract and fractions of hexane, ethyl acetate, methanol, water and boiling water were extracted from four pharmaceutical insect relatives: the Chinese gall, the cicada slough, the hornet nest and the batryticated silkworm. These extracts were investigated against the cancer cell lines of L1210, P388 and SNU-1 in vitro tests. Results showed that, ED, , against the cancer cell lines of L1210, P388 and SNU-1 were 0.55, 0.50, and $0.83{\mu}g/ml$ in the ethyl acetate fraction from the Chinese gall; 1.07, 2.19, and $2.24{\mu}g/ml$in the ethyl acetate fraction, 1.51, 1.26, and $1.45{\mu}g/ml$ in the water fraction and 1.48, 2.29, and $1.29{\mu}g/ml$in the boiling water fraction from the cicada slough; 3.31, 2.00, and $6.61\mug/ml$ in the water fraction from the hornet nest and 13.80, 19.95, and $31.62{\mu}g/ml$in the hexane fraction and 33.88, 21.88, and $25.12{\mu}g/ml$in the ethyl acetate fraction from the batryticated silkworm, respectively. All of the fractions mentioned above showed high cytotoxic activities and could be suggested for further studies in vivo tests.

• Journal of Microbiology and Biotechnology
• /
• v.13 no.2
• /
• pp.282-286
• /
• 2003

The purpose of this study was to isolate a specific DNA probe for the strain ATTC 25611 of the species Prevotella intermedia by using a new rapid screening mothod. The whole-genomic DNA of P. intermedia ATCC 25611 was isolated and purified. The HindIII-digested genomic DNAs from the strain were cloned by the random cloning method. To screen the strain-specific DNA probe, inverted dot blot hybridization tests were performed. In this assay, 20 ng of recombinant plasmids containing the HindIII-digested genomic DNA fragment were boiled and blotted onto a nylon membrane, and hybridized with digoxigenin-dUTP labeled genomic DNAs in a concentration of 100 ng/ml. Southern blot analysis was performed in order to confirm the results of the inverted dot blot hybridization tests. The data showed that a Pi34 probe (2.1 kbp; 1 out of 32 probes) was specific for P. intermedia strain ATCC 25611 and could be useful for the detection and identification of the strain, particularly in epidemiological studies of periodontal disease.

• Journal of Microbiology and Biotechnology
• /
• v.27 no.9
• /
• pp.1609-1616
• /
• 2017

The complex roles of cell surface modification in the biofilm formation of Campylobacter jejuni, a major cause of worldwide foodborne diarrheal disease, are poorly understood. In a screen of mutants from random transposon mutagenesis, an insertional mutation in the eptC gene (cj0256) resulted in a significant decrease in C. jejuni NCTC11168 biofilm formation (<20%) on major food contact surfaces, such as polystyrene and borosilicate glass, when compared with wild-type cells (p < 0.05). In C. jejuni strain 81-176, the protein encoded by eptC modified cell surface structures, such as lipid A, the inner core of lipooligosaccharide, and the flagellar rod protein (FlgG), by attaching phosphoethanolamine. To assess the role of eptC in C. jejuni NCTC11168, adherence and motility tests were performed. In adhesion assays with glass surfaces, the eptC mutant exhibited a $0.77log\;CFU/cm^2$ decrease in adherence compared with wild-type cells during the initial 2 h of the assay (p < 0.05). These results support the hypothesis that the modification of cell surface structures by eptC affects the initial adherence in biofilm formation of C. jejuni NCTC11168. In motility tests, the eptC mutant demonstrated reduced motility when compared with wild-type cells, but wild-type cells with the transposon inserted in a gene irrelevant to biofilm formation (cj1111c) also exhibited decreased motility to a similar extent as the eptC mutant. This suggests that although eptC affects motility, it does not significantly affect biofilm formation. This study demonstrates that eptC is essential for initial adherence, and plays a significant role in the biofilm formation of C. jejuni NCTC11168.

• Archives of design research
• /
• v.17 no.3
• /
• pp.147-156
• /
• 2004

Currently, usability tests for web sites with representative users are conducted in laboratory environment that disturbs subjects' natural behavior. These test methods are inefficient for tests that require large number of subjects, because experimenters and subjects should be located in the same place at the same time during the test. In this study, a remote usability test tool, called 'RIO' has been developed to cope with these laboratory-based experiment problems - the 'synchronism' and the 'unnatural environment'. The tool is separated into three parts: 'Project Manager', 'Remote Interaction Observer', and 'Interaction Analyzer'. 'Project Manager' sets up overall experimental parameters and actual tasks to be peformed by subjects. 'Remote Interaction Observer', endued with Microsoft Internet Explorer Control, is a modified Web Browser which records user interactions, screen images and elaborate browser events while subject performs given tasks. This module is distributed to subjects as an installable software package. When they finish all the tasks, the captured interaction data is compressed and sent to 'Interaction Data Server' automatically. 'Interaction Analyzer' visualizes interaction data from the 'Interaction Data Server'. It also generates project-scope statistics which facilitate discovering peculiar cases among interaction submissions.

• Journal of Broadcast Engineering
• /
• v.20 no.6
• /
• pp.901-911
• /
• 2015

Many studies tried to develop a 3D display based stereo test as a substitute for the conventional stereo test. Although many 3D monitor based stereo tests have various advantages over the conventional stereo tests with printed stimuli, they have a crucial limitation in manipulating disparity. The least value for disparity manipulation is one pixel, which is too big to screen the normal stereo acuity in pc environment with a short viewing distance. In this explorative study, a Gabor image was employed as a test stimulus, because its position can be manipulated by changing its phase information, which allows sub-pixel manipulation for disparity. Instead of employing the methods of the conventional stereo tests where measurement was made only once for each of a wide range of disparity values, 10 replications were administrated for each of 6 disparity levels. The results from the test using Gabor images were compared with those using random dot stimulus because the latter stimulus was exactly the same as that of the conventional stereo test. The correlation coefficient between two tests was found to be moderate. After one month later, the whole test was repeated in the same settings. The correlation coefficient between test and retest results from Gabor images was found to be as high as that from a random dot stimulus, implying high test-retest reliability. These results suggest that a Gabor stimulus could be used as a test stimulus for the valid and reliable stereo test, even in the limited condition, such as 3D environment with a short viewing distance and a condition for evaluating the stereo acuity very precisely.

• Journal of Korean Academy of Nursing
• /
• v.25 no.4
• /
• pp.774-789
• /
• 1995

Due to the rapid socioeconomic development and the introduction of the national health insurance system the general population's need for health care and utilization of health care services have increased dramatically. As a result of this change. Korea is experiencing a shortage of health care facilities and health manpower, and this leads long wailing line at doctor's offices. One of the solutions of this problem could be home health care system for those who have minor health related problems. With this background, this study was conducted to look at the feasibility of a home-based prenatal care system using information superhighway and nursing informatics specialists. With the home-based prenatal care system, the pregnant woman checks her blood pressure, tests her urine for sugar and protein, and measures her body weight at home and sends the information to a hospital computer via the information networks such as public telephone line and information superhighway. Nursing informatics specialist at the hospital will go through each patient record and screen those who have abnormal values and notify them to see a doctor as soon as possible. Besides telemonitoring features, the proposed system will include tole-education capabilities for the patients so that patient can learn whatever they need to know ragarding the prenatal care via information networks. If this system develops and operates, patient can save time in terms of travel to and from the hospital and waiting time in the hospital. And the health care institute can utilize its resource more efficiently.

• The Research Journal of the Costume Culture
• /
• v.5 no.3
• /
• pp.118-128
• /
• 1997

본 연구의 목적은 「Guiding Crieative Talent」의 저자이자 교수인 E.Pual Torrance에 의하여 제시된 디자인 기준(design criteria) 중에 3가지 디자인 기준을 선택하여, 스크린 프린팅기법에 의거, 일련의 디자인을 제작하는 것이다. 이 디자인 기준은 1958년, Torrance에 의하여 수행된 \"The Minnesota Tests of Creative Thinking\" 중 일부이다. 그는 \"창의적인 발상전개에 있어서 보다 더 주의를 요하는 것은 마지막 생산물(the products)이 아니라 그것의 과정(the process)인 것이다.\"라고 강조해 왔으며, 창의적 사고에 관한 개념을 제시해 왔다. 본 연구의 디자인은 그 창작의 착상의 모티브(motif)로써 연화문(蓮花紋)을 선택하여 다양한 디자인의 스크린 프린팅을 창작하였다. 12개의 디자인이 제작되었데, 그것은 Torrance에 의하여 제안된 약 20개의 기준(criteria) 가운데 저자가 디자인 착상에 있어서 최소한의 기본요소라 생각되어, 임의로 선택한 3가지 기준에 의하여 만들어졌다. :3가지 기준이란 1) 모티브(motif)의 수적증가(multiplication) 2) 모티브(motif)의 위치변화 3) 모티브(motif)의 모양변화이다. 전체적인 디자인과 테두리 디자인(border design)이 선택적으로 디자인 과정에 포함되었으며, 최종적으로 12개의 디자인이 선택, 1가지의 색채를 이용하여 스크린 프린팅에 의하여 제작되었다. 디자인 제작과정으로, Torrance의 각각의 디자인 기준에 의한 여러 장의 스케치를 그린 후, 그중 12개의 스케치를 임의로 선택하여 옷감위에 프린팅하였다. 디자인 제작 결과, 저자가 선택한 3개의 디자인 기준만으로도 다양한 수의 서로 다른 디자인 창작이 가능하였으며 본 연구에서는 1개의 디자인 기준을 선택 응용하였으나 보다 많은 디자인 기준을 선택하여 동시에 비교 연구하는 것도 필요하다고 본다. 그리고 1개 이상의 디자인 모티브(motif)를 함께 디자인 착상에 이용하는 것도 가능하다고 본다.

• Advances in aircraft and spacecraft science
• /
• v.5 no.2
• /
• pp.205-223
• /
• 2018

During launch a spacecraft is subjected to a variety of dynamical loads transmitted through the launcher to spacecraft interface or air-born transmission excitations in the acoustic pressure field inside the fairing. As a result, spacecraft are tested on ground to ensure and demonstrate the global integrity of the structure against these loads, to screen the flight hardware for quality of workmanship and to validate mathematical models. This paper addresses the numerical modelling and simulation of the low frequency sine and random vibration tests performed on electrodynamic shaker facilities to comprise the mechanical-borne transmission loads through the launcher to spacecraft interface. Consequently, the paper reviews techniques and methodologies to derive a reliable and representative coupled virtual vibration testing simulation environment based on experimental data. These technologies are explored with the main objectives to ensure a stable, reliable and accurate control while testing. As a result, the use of the derived simulation models in combination with the added value of improved control and signal processing algorithms can lead to a safer and smoother vibration test control of the entire environmental test campaign.