• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.11a
• /
• pp.255-259
• /
• 1996

This paper describes a system for measurement and control of a gas flow. In order to measure the flux of gas and control a vavle according to flux, this system was developed. This system is implemented on the personal computer and its environment is developed tool called TMS. This system includes a main program and Tele-Metering Unit for transmitting correcting flow value based on temperature and pressure in flow computer and AD converter for transmitting instantaneous flow rate, temperature and pressure as interface part of personal computer. This system was made by Visual C++ program. Using this system, inspected data for the recognition of transmitting flow value are generated on the screen, file and printer. The activity, reliability of this system was verified on Daegu-Citygas that aids the system for the acquisition of inspected data by realtime application.

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.1
• /
• pp.38-44
• /
• 1996

The CAD system for design and drawing of limit gauges was constructed and developed. This system was made by Visual Basic program. Using this system, drawings together with concerned data for the manufacturing of limit gauges are generated on the screen, file and printer. The data base was constructed by referring handbooks, textbooks, relevant standards and regulations. This system was proved a powerful tool for design and drawing of limit gauges by actual applications. The output drawings from this system are in good agreement with the drawings and data of the concerned standards and regulations.

• Proceedings of the KAIS Fall Conference
• /
• 2007.11a
• /
• pp.140-143
• /
• 2007

본 연구의 목적은 반도체 후공정 제조 시스템인 Screen Printer시스템에서의 프린팅 공정시 프린팅에 사용되는 Mesh Mask, Urethane Blade의 재질이 사용되는 반복횟수의 증가에 따라 재질의 변화에 의한 문제점과 프린팅 공정 파라미터인 Table 접촉거리, Squeegee 하강위치의 주변환경에 의한 변화를 보상하여 일정하게 프린팅이 될 수 있는 시스템을 구현 하는데 목적이 있으며, 이 논문은 서보모터를 구동하는 위치제어 시스템에 로드셀（Loadcell）을 이용하는 압력제어시스템을 연구하고 구현하고자 하였다.

• Clean Technology
• /
• v.7 no.3
• /
• pp.169-178
• /
• 2001

Textile printing prints around twenty bilion linear meters of textile each year. Rotary and flat bed screen printing requires pre and post treatments, leading to the loss of dyes and the environmental problems due to effluents. Digital ink jet printing can offer a solution to the existing problems, especially the environmental problems, in addition to its flexibility. Pigments are used as a dispersion inks in the digital inkjet textile printing. Molecular dynamic simulation like Stokesian dynamic simulation was employed to simulate the behavior of pigments and velocity distribution under the pressure driven flow in the printer nozzle. The simulation shows that the particle distribution in the flow are uniform if particle volume fraction is low, the ratio of nozzle and particle diameter is large, and the dimensionless average suspension velocity is low.

• Journal of the Microelectronics and Packaging Society
• /
• v.29 no.2
• /
• pp.59-64
• /
• 2022

Effects of film stack structure and peeling rate on the peel strength of screen-printed (SP) Ag/polyimide (PI) systems were investigated by a 90° peel test. When PI film was peeled at PI/SP-Ag and PI/SP-Ag/electroplated (EP) Cu structures, the peel strength was nearly constant regardless of the peeling rate. When EP Cu was peeled at EP Cu/SP-Ag/PI structure, the peel strength continuously increased as peeling rate increased. Considering uniaxial tensile test results of EP Cu/SP-Ag film with respect to loading rate, the increase of 90° plastic bending energy and peel strength was attributed to increased flow stress and toughness. On the other hand, viscoelastic PI film showed little variation of flow stress and toughness with respect to loading rate, which was assumed to result in nearly constant 90° plastic bending energy and peel strength.

• Journal of the Microelectronics and Packaging Society
• /
• v.17 no.1
• /
• pp.47-53
• /
• 2010

In this study, analyses on the stencil printing using solder paste were carried out. The key design parameters in the stencil printing process are printing conditions, stencil design, and solder paste properties. Among these parameters, the effects of physical properties of solder paste such as viscosity, surface tension, and contact angle on the stencil printing process were investigated. The analyses were performed for simple geometry and boundary conditions. In the analysis, solder paste was pushed into a stencil hole by pressure instead of printer pad. Considering the geometry and computational efficiency, axisymmetric analyses were adopted. A commercial software (COMSOL), which is well known in the area of micro-fluids analysis, was used. From the results, it was shown that viscosity of solder paste had an effect on the filling speed, while surface tension and contact angle had an effect on the filling shape.

• Proceedings of the KIEE Conference
• /
• 1997.07d
• /
• pp.1255-1257
• /
• 1997

In order to obtain key technologies for a kW class internal humidifying proton-exchange-membrane fuel cell (PEMFC) a single cell with a large electrode area has been designed and manufactured and the performance of large area membrane/electrode assemblies (MEAs) has been evaluated by using the single cell. A small area MEA made of commercial E-TEK electrode and Nafion 117 membrane showed a performance of 0.7V, $300mA/cm^2$ whereas large area MEA made of catalyst layer on carbon support and Nafion 117 showed a lower performance. To improve the performance of large MEA direct coating of catalyst was carried out on the membrane using a screen printer.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.28 no.2
• /
• pp.87-99
• /
• 2010

The ink which is left by sealed more than 6 months, it clogs head nozzle of machine due to precipitation and coagulation. In addition, if you stop printing about 3~4 hours in the middle of printing work, the head nozzles of printer could be naturally clogged. To prevent of this situation, worker should implement cleaning and checking head nozzle before hands. When the nozzle is clogged in the middle of work, running a head cleaning mode can clear the clogged nozzle. Yet, large amount of waste inks which are passed clogged nozzle will be remained after cleaning. It would be very nice that ink companies take the waste ink back by green marketing, but none of them are doing it currently. The purpose of this research is that making a black water-based recycle ink by waste inks which are left of nozzle clogging or passed expiration date. This recycle ink will improved working environment and reduce cost of disposing waste inks. Furthermore, it is very environment friendly and economical. It is called a recycle ink which is water-based black ink made by waste inks.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.11a
• /
• pp.594-597
• /
• 2004

본 연구에서는 진공 인라인 실장 기술을 이용하여 제작한 플라즈마 디스플레이 패널(PDP)의 전기적 광학적 특성을 측정하여, 일반적인 실장 방법을 이용한 PDP의 특성과 비교 분석하였다. 본 실험에 사용된 패널은 Screen Printer를 이용한 상 하부전극과 하판 유전체, 상판 투명유전체, 격벽 및 E-Beam Evaporation 방법을 이용하여 증착한 MgO 보호막으로 이루어져 있으며, 분위기 온도 $430^{\circ}C$, Ne-Xe(4%) 400[torr]압력 하에서 실장하였다. 높은 분위기 온도로 인하여 MgO에 Crack이 발생하였으나 지속적인 연구를 진행하여 최적의 실장 조건을 확립할 수 있었다. 이러한 진공 인라인 실장 기술은 추가적인 Annealing 공정이 필요하지 않아 공정의 단축을 모색할 수 있으며, MgO의 수화를 제거함으로써 일반적인 실장 방법을 이용한 패널보다 더 우수한 전기적 광학적 특성을 얻을 수 있었다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2023.05a
• /
• pp.305-307
• /
• 2023

현재 제조업에서 설비 라인 증축 및 최적화를 위해서는 공정 분석과 설비 시스템 테스트가 요구되며, 많은 시간과 비용이 소요된다. 이러한 문제를 해결하기 위해, 가상의 설비모델을 이용해 설비검증과 라인 테스트를 수행할 수 있는 다양한 CPS(Cyber Physical System)가 연구되고 있다. 본 논문에서는 다양한 설비 이해관계자 사이의 상호운용성을 확보하기 위해 독일의 Industry 4.0에서 제안한 표준 설비 명세인 AAS(Asset Administration Shell)를 활용한 CPS 구현을 제안한다. SMT(Surface Mounting Technology) 라인 중 Screen Printer를 대상으로, 총 3개의 서브 모델(Sub model)과 17개의 속성(Property)을 AAS 명세하고 이를 이용한 CPS를 구현하는 사례연구를 수행했다. 제안 방법은 표준명세를 활용한 제조 분야 CPS 구현에 적용될 수 있다.