• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 추계학술대회 논문집 Vol.18
• /
• pp.200-201
• /
• 2005

PFerroelectric PZT heterolayered thick films were fabricated by the alkoxide-based sol-gel method. PZT(40/60) and PZT(60/40) paste were made and alternately screen-printed on the $Al_2O_3$ substrates. We have introduced a press-treatment to obtain a good densification of screen printed films. The porosity of the thick films were decreased with increasing the applied pressure and the thick films pressed at 0.6 ton/$cm^2$ showed the dense microstructure and thickness of about 76${\mu}m$. The remanent polarization and coercive field increased with increasing applied pressure and the values for the PZT thick films pressed at 0.6 ton/$cm^2$ were 17.04${\mu}Ccm^2$, 78.09 kV/cm, respectively.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.1065-1066
• /
• 2008

Printed thin-film transistors (TFTs) have received profound interests as an alternative to their silicon counterparts for use in fabricating next-Gen microelectronics by virtue of projected low manufacturing cost and certain salient features (e.g., thin and lightweight characteristics, structural flexibility, etc.) that printed TFTs bring to device architecture. The economic advantages stem from engaging low-cost printing techniques (e.g., screen printing, gravure, flexography, etc.) for deposition and patterning in place of traditionally costly high-vacuum, high-temperature photolithographic processes. To render printing TFTs possible, solution processable materials are necessary.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2009년도 춘계학술대회 논문집
• /
• pp.349-350
• /
• 2009

• 한국전기전자재료학회논문지
• /
• 제17권5호
• /
• pp.541-544
• /
• 2004

Multi- wall carbon nanotubes(MWNTs) were synthesized by thermal chemical vapor deposition. The paste for screen printing was composed of MWNTs, organic vehicle and glass frit. Carton nanotube paste was screen-printed on ITO(indium tin oxide) deposited soda lim을 glass, and then heat treatment was performed. Before the surface treatment, turn on field of derive was 2.6 V/$\mu\textrm{m}$. After the surface treatment, the value was changed into 1.8 V/$\mu\textrm{m}$. The anode current of the derive with 2.83 V/$\mu\textrm{m}$(turn on field) was changed 4 $\mu\textrm{A}$ into 390 $\mu\textrm{A}$ at 1,700 V. Adsorption effect of MWNTs onto phosphor of anode plate was observed by the field emission measurement and resulted in bad effects on properties of devices lifetime and emission lighting.

• 한국의류학회지
• /
• 제41권2호
• /
• pp.212-223
• /
• 2017

This research investigated the screen printing method for natural indigo dye on cotton fabric. We examined four types of thickening agents (arabic gum, guar gum, indalca, and CMC) based on their ability to retard the oxidation of natural indigo print paste while the paste remained on the screen frame. The results indicated that the retardation of arabic gum towards oxidation was the greatest among the four types of thickening agents. The highest K/S value of the printed cotton was observed with a dye concentration of 50g/L fermented indigo powder. The best printing results were obtained when the duration of dye efficiency was tested for the 10 minutes of the dye paste remaining on the screen with a thickening agent concentration of 26.56% that represented 530 cps viscosity. The test of colorfastness to washing and rubbing of the printed cotton resulted in grade 5, and the colorfastness to sunlight resulted in grade 4. Chinese traditional Naminwhapo printing was reproduced on cotton fabric using the natural indigo printing method derived from this study.

• 마이크로전자및패키징학회지
• /
• 제29권2호
• /
• pp.43-48
• /
• 2022

인쇄전자소자의 금속배선 적용을 위해 스크린 프린팅 Ag/폴리이미드(polyimide, PI) 사이의 계면접착력을 85℃/85% 상대습도의 고온/고습 처리 시간에 따라 PI 필링을 통한 90° 필 테스트로 평가하였다. 고온/고습 처리 전 필 강도는 약 25.99±1.47 gf/mm이었고, 500시간 동안 고온/고습 처리 후 필 강도는 6.05±0.54 gf/mm까지 지속적으로 감소하였다. 박리 파면에 대해 X-선 광전자 분광법 분석 결과, 이는 Ag/PI 계면으로 수분이 지속적으로 침투하여 계면 근처 PI 일부가 가수분해되어 weak boundary layer를 형성하기 때문이고, 이로 인해 고온/고습 처리 전 Ag/PI 계면 박리모드가 고온/고습 처리 후 계면 근처 PI의 얕은 내부 박리 모드로 변경된 것으로 판단된다.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2009년도 춘계학술발표대회 논문집
• /
• pp.225-229
• /
• 2009

The front metal contact is one of the most important element influences in efficiency in the silicon solar cell. First of all selective of the material and formation method is important in metal contacts. Commercial solar cells with screen-printed contacts formed by using Ag paste process is simple relatively and mass production is easy. But it suffer from a low fill factor and a high shading loss because of high contact resistance. Besides Ag paste too expensive. because of depends income. This paper applied for Ni/Cu metallization replace for paste of screen printing front metal contact. Low cost Ni and Cu metal contacts have been formed by using electroless plating and electroplating techniques to replace the screen-printed Ag contacts. Ni has been proposed as a suitable silicide for the salicidation process and is expected to replace conventional silicides. Copper is a promising material for the electrical contacts in solar cells in terms of conductivity and cost. In experiments Ni/Cu metal contact applied same grid formation of screen-printed solar cell. And it has variation of different grid spacing. It was verified that the wide spacing of grid finger could increase the series resistance also the narrow spacing of grid finger also implies a grid with a higher density of grid fingers. Through different grid spacing found alteration of efficiency.

• 한국도서관정보학회지
• /
• 제35권2호
• /
• pp.31-45
• /
• 2004

The purpose of this study is analyze physical and textual characteristics of the fold screen with Gosi(고시), tour ancient poems own by Beopjusa temple(법주사) in Mt. Sokrisan(속리산). The calligraphic specimen of this fold screen is written by King Seonjo(선조), and it seems to be made by between 1725 and 1758. On the view of physical point, the size of the fold screen is 190.0cm high, and 67.2cm wide each fold. And its format is made by 8 fold screen and its calligraphic style is a ‘cursive’ style. It was printed by wood block printing with chinese ink on the Geonji(견지). On the view of textual point, the fold screen of Gosi(고시) is consist of four ancient poems, and its content is describe to yearning for the appearance of the true gentleman possessed with high principles and virtue. And the four ancient poems is arranged by a well organized passage.

• 반도체디스플레이기술학회지
• /
• 제12권1호
• /
• pp.47-51
• /
• 2013

The screen printing is a process that is widely used in manufacturing process of various fields such as flexible devices, portable multimedia devices, OLED, and the solar cell. The screen printing method has been studied as a method for forming the high precision micro-pattern, making the low-cost manufacturing process and reducing cost through improvement of productivity. It is applicable to deposit and forming the pillars which are one of the core element for comprising vacuum glazing. In this paper, by using the paste of the glass frit base, the screen printing was performed. We analyzed the effect for the printing process to deposit pillar paste on the screen printing parameters by the factorial experimental design. The polynomial predicting the volume of the printed supporting pillars was drawn by using screen printing.

• 마이크로전자및패키징학회지
• /
• 제22권4호
• /
• pp.65-70
• /
• 2015

히트 싱크용 소재에 응용할 목적으로 단층금속과 2층 단면구조 복합재료에 대해 열전도 특성을 연구하였다. 단층금속으로는 알루미늄합금(Al6061)을 사용했으며, 2층 단면구조 복합재료로는 Al6061기판에 질화알루미늄(AlN)을 스크린 인쇄한 층상구조 복합재료를 선택하였다. 섬광법으로 측정한 열확산계수와 비열 및 밀도를 사용해서 열전도도를 측정하였다. 실험을 통해 얻은 열전도 특성 값을 참고문헌에 보고된 자료를 사용해 계산한 값과 비교하였다. Al6061 기판에 스크린인쇄법으로 AlN 후막을 형성시킨 2층 단면구조 복합재료 시편의 열전도도는 AlN 후막의 두께가 증가할수록 선형적으로 감소하였다. 측정한 복합재료의 열전도도는 두께가 $53{\mu}m$과 $163{\mu}m$일 때, 각각 $114.1W/m{\cdot}K$와 $72.3W/m{\cdot}K$로 나타났다. 또한, 스크린 인쇄한 AlN 후막의 열전도도를 열전도비저항에 대한 혼합법칙을 적용해서 평가하였다. AlN 후막의 두께가 $53{\mu}m$와 $163{\mu}m$인 경우, 스크린 인쇄한 AlN 후막의 열전도도는 각각 $9.35W/m{\cdot}K$와 $12.40W/m{\cdot}K$로 나타났다.