• Environmental Analysis Health and Toxicology
• /
• v.19 no.3
• /
• pp.287-294
• /
• 2004

Diabetic complication is one of major risk factors leading to vascular disease such as atherosclerosis, stroke, coronary heart disease and etc. Several factors affecting the acceleration of diabetic vascular complication have been known such as hypertension, hyperlipidemia, immune complex and genetic factors. To screen and develop new therapeutics agents for diabetic vascular complication, it is strongly needed to develop animal models for diabetic complications. However in rodents models, diabetic complications is not well developed. Furthermore to assess the possibility of new therapeutics for diabetic vascular complications, diabetic animal models which have the risk factors of diabetic complications is needed. We aim to develop and establish an diabetic animal model which have diabetic complications with hyperlipidemia which is one of risk factors for diabetic complications. We induced insulin -dependent diabetes by intra. venous injection of streptozotocin (35 mg/kg/day) in RICO rats which is a spontaneous animal model for hyperlipidemia. Our models (STZ RICO) showed hyperglycemia, persistent high level of plasma cholesterol and triglyceridemia with severe diabetic renal changes until 28 weeks after induction of diabetes. STZ-RICO rats could be used for the evaluations of newly developed diabetic drugs.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.12 no.3
• /
• pp.167-173
• /
• 1979

It is preented the removable moving screen media-activated sludge (REMSMAS) process by using the biological fixed-film systems. The substrate removal kinetic difference between the aeration-only completed mixing activated sludge (CMAS) process and REMSMAS process were observed. The substrate removal kinetics were developed based on the attached and suspended microbial growths. The units of the aeration-only CMAS process were continously operated with the normal detention time of 4.5, 6, 9.5 and 12 flours studies after steady-state condition and the operating of the REMSMAS units conducted with the normal detention time of 6 and 12 hours studies in nonsteady-state condition. The feed solution was diluted 18 times to the raw starch wastewater in of order to maintain the proper COD (950mg/l) and BOD (450mg/l) concentration. Design parameters related to the suspended microbial growths were caculated by the equations used in the aeration-only CMAS model and these parameters used to evalute the kinetic constants in the REMSMAS process. The kinetic constant values of $Y_2,\;K_d,(\mu_{max})_s\;and\;K_s$ from Monod equations were respectively 0.78, 0.027/hr, 1.1/hr and 95mg/l in the aeration-only CMAS process. The value of the aera capacity (F) appeared to be $9.1\;mg/cm^2-day$ and the mean value of the saturation constant $(K_g)$ appeared to be 53.5 mg/l in the REMSMAs process. Also, the substrate removal .ate of the REMSMAS process was higher than that of the normal activated sludge process when this system was operated in steady-state condition. However, the rate was reduced as the critical operating day was approached.

• Journal of Environmental Impact Assessment
• /
• v.19 no.3
• /
• pp.271-279
• /
• 2010

We conducted a quantitative human health risk assessment with respect to inhalation of heavy metals for residents of housing developments in "new towns" where an incinerator will be operated within the area scheduled for construction thereof. To assess potential human health risk we calculated the amount of heavy metals emitted from the incinerator, and then forecasted the potential health impact on adjoining areas where new housing is to be developed (i.e. "new towns") at different altitudes by a using SCREEN-3 model. We assessed Cancer Risk (CR) caused by known carcinogens using the Inhalation Unit Risk criteria developed by the US Environmental Protection Agency. Notably, we assessed risk by determining concentrations of heavy metals on a floor by floor basis, as apartment buildings are to be constructed near the incinerator according to a pre-devised plan. Results indicated that cancer risk for most carcinogens exceeded US EPA standards for the highest locations at each collection point. This result indicates that construction of high buildings in areas adjoining incinerators is undesirable, and that measures to lower carcinogens are needed. The results of this study, which assessed health risk from exposure to heavy metals emitted from a nearby incinerator, can be useful in land use planning with respect to the location of housing developments in new towns, as well as the heights of any buildings constructed. Furthermore, the methodology deployed herein with respect to risk assessment can be helpful for policy makers and the general public in the event of conflicts regarding incinerator projects in the future. The results herein may also be of merit in determining priorities when establishing harm reduction measures for carcinogens at incinerators. However, the study does contain several limitations. The SCREEN-3 model, a kind of screening model that provides conservative results, can provide higher forecasted concentrations of air pollutants than other models. Moreover, although the incinerator in question is set to be a thermoselect type, domestic data for emissions from these incinerators is not available, and assumptions were based on a stoker type incinerator. Insufficient domestic data likewise compelled the use of data of USA, resulting in possible errors in results. Continued research will thus be required to develop systematic methodologies that address the foregoing factors and produce more reliable outcomes.

• Journal of Chest Surgery
• /
• v.13 no.4
• /
• pp.338-345
• /
• 1980

We have modified an isolated perfusion rat heart model of cardiopulmonary bypass, with which we are able to screen the effects of various cardioplegic solutions and hypothermia upon the ability of the heart to survivie during and recover from period of ischemic arrest. The modified experimental model was differed from the original as follow : a heat coil chamber of atrial and aortic reservoir provided temperature control, and the perfusate was gassed with each pure oxygen and pure carbon dioxide in 95:5 ratio. The Langendorff perfusion was initiated for a 10 minute period by introducing perfusate at $37^{\circ}C.$ into the aorta from the aortic reservoir located 100 cm above the heart. The isolated perfused working rat heart model was a left heart preparation in which oxygenated perfusion medium (at $37^{\circ}C.$) entered the cannulated left atrium at a pressure of 20 cm $H_{2}O$ and was passed to the ventricle, from which it was sponeously elected(no electrical pacing) via an aortic cannula, against a hydrostatic pressure of 100cm $H_{2}O$. during this working period various indices of cardiac functin were measured. The cardiac functions were stable for over 3 hour with perfusion of Krebs-Henseleit bicarbonate buffer solution containing only glucose (11.1 mM/L). The percentage of cardiac functins were maintained about 94% on heart rate, 80.6% on peak aortic pressure, 87.7% on coronary flow and 76.3% on aortic flow rate after 3 hour of working heart perfusion at a pressure of 20 cm $H_{2}O$. We believe this preparation to be a good biochemical model for the human heart which offers many advantages including economic, speed of preparation, reproducibility, and the ability to handle large numbers.

• Journal of Korea Multimedia Society
• /
• v.8 no.3
• /
• pp.398-412
• /
• 2005

There is an increasing interest in migration legacy systems to new hardware platforms and to new software development paradigms. The reason is that high maintenance costs and lack of documentation. In order to migrate or transform legacy system, various approaches such as screen scrapping, wrapping, semi-development, and re-development, tools, and methodologies are introduced until now. However, architecture or requirements level's transformation is not suggested because most of those approaches focus on code-level transformation or a few model-level transform. In this paper, we suggest a meta-model driven approach applying 3D space concept, which can be applied into architecture and requirement phase. Proposed integrated model drives seamless migration or co-evolution from code to architecture of reverse engineering and from architecture to code of forward engineering.

• International Journal of Fluid Machinery and Systems
• /
• v.6 no.3
• /
• pp.152-159
• /
• 2013

A two-dimensional Darrieus-type hydroturbine system, installed with a wear for flow streams such as small rivers and waterways, has been developed for hydropower utilization of extra-low head less than 2m. There are several problems such as flow rate change and flowing wastes to be solved for its practical use in natural flow streams. In the present study, at first, a design guideline in the case of overflow or bypass flow is shown by using simple flow model. Next, in order to avoid the unexpected obstacles flowing into the hydroturbine, an installation of waste screening system is examined. It is confirmed that the screen is effective with some amount of bypass flow rate, however the output power is remarkably deteriorated.

• Journal of Microbiology and Biotechnology
• /
• v.28 no.3
• /
• pp.397-400
• /
• 2018

Rhodosporidium toruloides, an oleaginous yeast, can be used as a fast and reliable evaluation tool to screen new natural lipid-lowering agents. Herein, we showed that triglyceride (TG) accumulation was inhibited by 42.6% in 0.1% red radish coral sprout extract (RRSE)-treated R. toruloides. We also evaluated the anti-obesity effect of the RRSE in a mouse model. The body weight gain of mice fed a high-fat diet (HFD) with 0.1% RRSE (HFD-RRSE) was significantly decreased by 60% compared with that mice fed the HFD alone after the 8-week experimental period. Body fat of the HFD-RRSE-fed group was dramatically reduced by 38.3% compared with that of the HFD-fed group.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.11
• /
• pp.3318-3326
• /
• 2010

Five new series of 3,4-ethylenedioxythiophene derivatives carrying important pharamacophores, viz., amide, ester, ether and active secondary aryl moieties have been designed and synthesized through multistep reactions starting from thiodiglycolic ester and diethyl oxalate. They have been characterized by elemental and spectral data. All the target compounds have been screened for their anticonvulsant activity at three different models viz. maximal electroshock (MES), subcutaneous metrazole (scMET), and 6 Hz screen and evaluated for their neurotoxicity in rotorod model. Compound 6a emerged as lead with no neurotoxicity. All the five series of compounds are safe in the toxicity studies at the maximum dose of 300 mg/kg of body weight. Amongst the tested compounds, the ester pharmacophore with thioamide fragment has showed better activity than the other analogs.

• Korean Journal of Computational Design and Engineering
• /
• v.3 no.1
• /
• pp.22-30
• /
• 1998

The deflection yoke (DY) controls the direction of the electron beam that falls on the screen of the television monitor. Its quality depends on the shape and density of coils wound around the DY coil separator. Winding frames are used to make these coils, and therefore, their shapes are essential in making quality coils. A reverse engineering(RE) is applied to create the 3D model of the winding frame. It considerably shortens the design verification time and shows the level of accuracy that is feasible in the production mode. The paper explains each step of the reverse engineering process in detail.

• Journal of KIISE
• /
• v.42 no.5
• /
• pp.609-620
• /
• 2015

Viewers of videos are likely to absorb more information from the part of the screen that attracts visual attention. This fact has led to the visual attention models that are being used in producing and evaluating videos. In this paper, we investigate the factors that are significant to visual attention and the mathematical form of the visual attention model. We then estimated the visual attention probability using the statistical design of experiments. The analysis of variance (ANOVA) verifies that the motion velocity, distance from the screen, and amount of defocus blur affect human visual attention significantly. Using the response surface modeling (RSM), we created a visual attention score model that concerns the three factors, from which we calculate the visual attention probabilities (VAPs) of image pixels. The VAPs are directly applied to existing gradient based 3D effect perception measurement. By giving weights according to our VAPs, our algorithm achieves more accurate measurement than the existing method. The performance of the proposed measurement is assessed by comparing them with subjective evaluation as well as with existing methods. The comparison verifies that the proposed measurement outperforms the existing ones.