• Korea-Australia Rheology Journal
• /
• 제19권1호
• /
• pp.1-5
• /
• 2007

By combining ultrasonic energy which is essential for the chain scission of polymer molecules and a multifunctional agent (MFA) having double bonds at its ends, we were able to modify the molecular structure of polycarbonate (PC) from linear to a branched structure during melt processing. The three double bonds in chain ends of MFA were expected to act as sites for trapping macroradicals of PC during the course of ultrasound-assisted mixing process. The transformation of molecular structure of PC was confirmed by the measurements of rheological properties of the modified PC. After the ultrasonic irradiation of PC together with MFA, increase in complex viscosities and shear-thinning behavior were observed. The Cole-Cole plot and measurement of extensional viscosities revealed the characteristic features of branched structure with well-defined extensional behavior which is comparable to that of a commercial branched PC.

• 한국응용약물학회:학술대회논문집
• /
• 한국응용약물학회 1995년도 춘계학술대회
• /
• pp.110-110
• /
• 1995

This study was carried out to investigate the dose dependent antifibrotic effects of G009, the water-soluble fraction of polysaccharide extracted from Ganoderma lucidum. The experimental hepatic cirrhosis was induced by bile duct ligation/scission (BDL/S) in rats. BDL/S rats in each group were dosed 0.5, 2, 5 or 10mg/rat/day orally for 4 weeks after the operation. Antifibrotic effects were evaluated by serum biochemical values, hydroxyproline contents, and light microscopical histology.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 C
• /
• pp.1543-1545
• /
• 1997

In this work, properties of FRP insulation materials by thermal-accelerated degradation were investigated. Usually, most degradations cause the hydrophilic to decrease the contact angle and surface properties. But, in this work on thermal-degradated FRP, we can confirm the introduction of hydrophobic properties by cross-linking and the ablation of small-molecules rather than chain scission and oxidation. Hydrophobic introduction in thermal-degradated FRP caused the increase of electrical insulation on treated FRP surface. But, Tensile strength decreased steeply on FRP being exposed higher temperature.

• 대한화학회지
• /
• 제7권2호
• /
• pp.122-127
• /
• 1963

Pyrolysis fo polyethylene and polypropylene has been studied in order to clarify the mechanism of chain scission and effect of oxygen on degradation. Rate of weight decrease was measured under nitrogen and air atmosphere at constant temperature for the samples of high density polyethylene, low density polyethylene and isotactic polypropylene, and then gaseous hydrocarbons produced from pyrolysis were analysed by gas chromatography. Although there is little substantial difference between composition of hydrocarbon gases from pyrolysis of high density polyethylene and low density polyethylene except some difference in quantity of total gas produced, gas composition from polypropylene pyrolysis differs from that of polyethylene pyrolysis. Gases from pyrolysis under air contain much more unsaturated hydrocarbons than those from pyrolysis under inert gas.

• Elastomers and Composites
• /
• 제23권3호
• /
• pp.213-222
• /
• 1988

The thermal decomposition of poly(n-butyl methacrylate)(Pn-BMA) was studied using a dynamic and isothermal thermogravimetry in nitrogen gas with 50ml/min at several heating rates from 1 to $20^{\circ}C/min$, and at several heating temperature from 320 to $370^{\circ}C$. The mathematical techniques used for calculation of activation energy were Kissinger, Anderson, Chatterjee-Conrad, Friedman, Fuoss, Ozawa and isolthermal method. The range of activation energies obtained using the several techniques was between 43 and 51Kcal/mol except Chatterjee-Conrad and this range agreed with each other very well. The thermal degradation of Pn-BMA was considered to be carried out by main chain scission.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 춘계학술대회 논문집
• /
• pp.430-433
• /
• 1999

MPPO(Modified-Polyphenylene Oxide) was irradiated with helium, nitrogen, and argon ions at the ion energy of 50 keV and 70 keV from the dose region of 5$\times$10$^{15}$ to 5$\times$10$^{16}$ ions/$\textrm{cm}^2$. The resistance of the irradiated MPPO surface could be decresed about 10$^{10}$ to 10$^{7}$ $\Omega$/sq with increasing the total ion dose and ion energy. Chemical characteristics of the irradiated surface were analyzed by XPS(X-ray photoelectron spectroscopy).

• 자연과학논문집
• /
• 제5권1호
• /
• pp.59-65
• /
• 1992

아실옥시이미노(AOI)기를 갖는 포리마의 광반응 특성을 검토한 결과, 포리마 주쇄의 구조에 따라 주반응이 다른것을 알았다. 아크릴타입(AAPO)포리마에서는 아미노기의 생성이 주 반응임에 반해 메타크릴타입(MAAPO)포리마에서는 주쇄절단반응과 이중결합 생성반응이 주 반응임을 알았다. 또한 본 연구에서는 광반응의 메카니즘을 정량분석을 통해 철저히 규명함과 아울러 이들 주 반응에서 생성된 아미노기와 주쇄절단반응을 이용한 기능성고분자에의 응용에 대해서도 연구 검토하였다.

• Elastomers and Composites
• /
• 제50권4호
• /
• pp.245-250
• /
• 2015

Recycling of ethylene-propylene-diene terpolymer (EPDM) scrap was tried by blending with polypropylene (PP). EPDM scrap powder was prepared by shear pulverization process at high temperature, which may lead to selective chain scission induced by difference in the critical elastic coefficient. On the other hand, EPDM scrap powder was prepared by adding a selected reclaiming agent during shear pulverization process at high temperature. Terpene as a bonding agent was then introduced to improve adhesion property. PP, used as a matrix for manufacturing thermoplastic elastomer, was modified by the incorporation of dicumyl peroxide and maleic anhydride. The functionalized EPDM and modified PP were blended and cured dynamically at $190^{\circ}C$. The blend materials prepared in this study showed the comparable results to those of conventional TPE in terms of tensile and flow properties. Also, the odor component of recycled EPDM was analyzed using GC-MS.

• Macromolecular Research
• /
• 제12권1호
• /
• pp.141-143
• /
• 2004

We have investigated the dynamic mechanical behavior of ultra-high molecular weight polyethylene (UHMWPE) irradiated with varying doses of gamma rays. A relaxation peak in the loss factor curve, which has not been reported previously in the literature, is observed at a temperature above the crystal melting temperature. The peak is unique to UHMWPE and appears to be related to the high degree of entanglement. Because the temperature and intensity of the peak are reduced by irradiation-induced chain scission and crosslinking, respectively, we believe that the peak is associated with disentanglement relaxation. The behavior of the storage modulus in the melt state agrees with the classical theory of rubber elasticity.

• Macromolecular Research
• /
• 제8권4호
• /
• pp.192-198
• /
• 2000

Cure characteristics and physical properties of carbon black-filled natural rubber (NR) compounds depending on the mixing procedure were studied using the compounds with different pre-final mixing (FM-1) stages. Carbon master batch (MB) and first and second remitting (1RM and 2RM) stages were employed as the FM-1 stage. Bound rubber content of the FM compound decreased with increasing the mixing steps. This was due to the decrease of the molecular weight distribution of the polymer by the rubber chain scission during the mixing. The Mooney viscosity decreased with increasing the mixing steps. Cure characteristics of the compounds were found to be different with the mixing procedures. The cure times of the compound became slower by increasing the number of the mixing steps. This was explained by the length of rubber chain, the carbon black network, distribution of the curatives in the compound, and immobilization of the polymeric segments. Modulus and tensile strength of the vulcanizate did not show a specific trend with the mixing procedure. Fatigue life of the vulcanizate increased by increasing the mixing stages.