• Applied Chemistry for Engineering
• /
• v.20 no.5
• /
• pp.511-516
• /
• 2009

Photodegradation characteristics of polyolefin composites were studied. Thermogravimetric analysis results suggest that the polyolefin blends used in this study have different amounts of talc. The mechanical behaviors of polyolefin blends, which experienced UV-irradiation in accordance with SAE J1960, are investigated using tensile and Izod impact tests. These results show that as the UV-exposure time increases, a significant drop in the elongation at break and impact strength at a low temperature are observed. This may be explained by the decreases in elastic energy derived from the scission of polymer molecular chains and the low density of entanglement after UV- photodegradation. Scanning electron microscopy observations indicate that no crack and surface damage are observed, while the additional talc particles are exposed, on the UV-exposed surfaces. The exposure of talc particles may be responsible for the discoloration of UV-exposed polyolefin blend surface. Observation using Fourier transform infrared spectroscopy (FT-IR) confirms the presence of photodegradation on the surface of UV-exposed polyolefin blend.

• Korean Journal of Veterinary Research
• /
• v.31 no.3
• /
• pp.329-335
• /
• 1991

The filter elution technique was used to assay $^{60}Co$ $\gamma$ ray-induced DNA strand breaks(SB) in EL4 mouse leukemia cell and mouse spleen lymphocyte. The lymphocytes were stimulated with lipopolysaccharide (LPS, $20{\mu}g/ml$) to label $[^3H]$ thymidine. EL4 cells and lymphocytes in suspension were exposed at $0^{\circ}C$ to 0Gy, 1Gy, 5Gy, 10Gy or l5Gy for DNA single strand breaks(SSB) assay and 0Gy, 25Gy, 50Gy, 75Gy or 100Gy for DNA double strand breaks(DSB) assay of $^{60}Co$ radiation and elution procedure was performed at pH12.1 and 9.6. The number of DNA strand breaks increased with increasing doses of r rays. The strand scission factor(SSF) was estimated in each experiment (eluted volume 21ml). The slope of SSB EL4 cells was $0.01301{\pm}0.00096Gy^{-1}$ (n=5), the slope of SSB for lymphocytes was $0.01097{\pm}0.00091Gy^{-1}$ (n=5) and the slope of DSB for lymphocytes was $0.001707{\pm}0.0000573Gy^{-1}$ (n=5). Thus EL4 cells were more sensitive to induction of DNA SSB by ionizing radiation than lymphocytes (p<0.005). The ratio of slope of dose-response relationship (SSF versus dose) of lymphocytes DNA SSB as compared with the slope of DNA DSB was 6.4.

• Proceedings of the Ginseng society Conference
• /
• 1998.06a
• /
• pp.270-280
• /
• 1998

Ginseng is one of the most widely used medicinal plants, particularly in East Asian countries. Certain fractions or purified ingredients of ginseng have been shown to exert inhibitory effects on growth of cancer cells in culture or on tumorigenesis in experimental animals. Moreover, a recent epidemiologic study reveals that ginseng intake is associated with a reduced risk for environmentally related cancers such as esophageal, gastric, colorectal, and pulmonary tumors. Heat treatment of Panax ginseng C. A. Meyer at the temperature higher than that applied to the conventional preparation of red ginseng yielded a mixture of saponins with potent antioxidative properties. Thus, the methanol extract of heat-processed ginseng (designated as'NGMe') attenuated lipid peroxidation in rat brain homogenates induced by ferric ion or ferric ion plus ascorbic acid. Furthermore, the extract protected against strand scission in f Xl 74 supercoiled DNA Induced by UV photolysis of H2O2 and was also capable of scavenging superoxide generated in vitro by xanthine/xanthine oxidate or in differentiated human promyelocytic leukemia (HL-60) cells by the tumor promoter,12-0-tetvade- canoylphorbol-13-acetate (TPA). Since tumor promotion is closely linked to oxidative stress, we have determined possible anti-tumor promotional effects of NGMe on two-stage mouse skin tumorigenesis. Topical application of NGMe onto shaven backs of female ICR mice 10 min prior to TPA significantly ameliorated skin papillomagenesi s initiated by 7,12-dimethylbenz (a) anthracene (DMBA).'Likewise, TPA-induced epidermal ornithine decarboxylase activity and elevation of tumor necrosis factor-a were suppressed signifies%fly by NGMe pretreatment. NGMe topically applied onto surface of hamster buccal pouch 10 min before each topical application of DMBA inhibited oral carcinogenesis by 76olo in terms of multiplicity. Taken together, these results suggest that processed Panax ginseng C. A. Meyer has potential cancer chemopreventive activities.

• Elastomers and Composites
• /
• v.55 no.1
• /
• pp.51-58
• /
• 2020

In this study, the thermal oxidation of raw natural rubber (NR) was investigated under controlled conditions by optical image and fourier transform infrared (FT-IR) analysis. The thermal oxidation was performed on a transparent thin film of raw NR coated on a KBr window in a dark chamber at 80℃ under low humidity conditions to completely exclude moisture and restrict light oxidation. Images of the thin film of raw NR were obtained before and after thermal oxidation. FT-IR absorption spectra were measured in the transmission mode at different thermal exposure times. The thermal oxidation of NR was examined by the changes in the absorption peaks at 3449, 1736, 1447, 1377, 1242, 1072, and 833 cm^-1, which corresponded to a hydroxyl group (-OH), a carbonyl group (-C=O) from an aldehyde and a ketone, a methylene group (-CH₂-), a methyl group (-CH₃), a carbon-oxygen single bond (-C-O) from an epoxide, a carbon-oxygen bond (-C-O) from an ether, an alcohol, a peroxide, or a cyclic peroxide, and a cis-methine group (cis-CCH₃=CH-), respectively. In the initial stage of thermal oxidation, two different types of free radicals were produced quickly and randomly by the homolytic cleavage of a double bond and allylic hydrogen abstraction. Aldehydes and ketones were formed from chain scissions of the double bonds and alcohols were produced from allylic hydrogen abstraction at the methylene or methyl groups. Two reactions seemed to proceed competitively with each other. At a later stage, oxidative crosslinks seemed to dominate through the combination of free radicals such as an allyl radical (CH=CHCH₂·), alkoxy radical (RO·), and peroxy radical (ROO·) and the reaction of a hydroperoxide (-ROOH) with a double bond. The image obtained after thermal oxidation showed hardening without cracks. Based on these observations, a plausible two-step mechanism was suggested for chain hardening caused by the thermal oxidation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.4
• /
• pp.867-873
• /
• 2007

Thermal degradation characteristics of polypropylene and polystyrene have been studied in the thermogravimetric(TG) reactor and batch-type microreactor. The dynamic thermogravimetric curve of TG provided a valuable information about pyrolysis temperature. It was found that PS was thermally degraded at lower temperature of $30{\sim}50^{\circ}C$ than PP. It was found that the yield and molecular weight of liquid product in the microreactor were decreased with the increase of reaction temperature and time in the case of PP. The production of styrene monomer was significantly increased by the promotion of depolymerization with the increase of temperature and time. The chain-end scission rate parameters were determined to be 50.0 kcal/mole of PP, 45.2 kcal/mole of PS by the Arrhenius plot.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.11a
• /
• pp.533-538
• /
• 2003

It has been shown that ion implantation produces remarkable improvements in surface-sensitive physical and chemical properties as well as other mechanical properties, in polymers. In this study, ion implantation was performed onto polymer, PC(polycarbonate), in order to investigate surface hydrophilic property through contact angle measurement using distilled water. PC was irradiated with N, Ar, Xe ions at the irradiation energy of $20\;{\sim}\;50keV$ and the dose range of $5{\times}10^{15},\;1{\times}10^{16},\;7{\times}10^{16}\;ions/cm^2$. The contact angle of water has been reduced with increasing fluence and ion mass but increased with increasing implanted energy. The changes of chemical and structural property are discussed in view of infrared spectroscopy and FT-IR, XPS, which shows increasing C-O bonding and C-C bonding. The root mean square of surface roughness examined by means of AFM changed smoothly from 0.387nm to 0.207nm and the change of wettability was discussed with respect to elastic and inelastic collisions obtained as results of TRIM simulation. It was found that wettability of the modified PC surface was affected on change of functional group and nuclear stopping or linear energy transfer(LET, energy deposited per unit track length per ion) that causes chain scission by displacing atom from polymer chains, but was not greatly dependant on surface morphology.

• Membrane Journal
• /
• v.13 no.2
• /
• pp.110-117
• /
• 2003

Sulfonated polyimides had been utilized and studied widely as available materials in chloro-alkali electrolysis, cationic exchange resins, and so on. However, a slow decrease in performance during experiments had been reported, which could be attributed to a loss of ionic conductivity related to either a continuous dehydration or polymer degradation. One of main reasons to account for the degradation of sulfonated polymers is the hydrolysis leading to polymer chain scission and decrement of molecular weight. Therefore, the objective of our study was to investigate possible imide cycle and additional ester bond cleavage connected with $SO_3$H presence under hydrated condition. In order to confirm and obtain as clear information as possible about breakages of bonds via $^1H\; and \;^{13}C$ NMR and IR spectroscopic analyses, our study was performed by model compound. Consequently, model compounds with both phthalic and naphthalenic imide ring and ester bonds were synthesized to evaluate the hydrolysis stability of sulfonated polyimide. The experiments were performed for prepared model compounds before and after aging in deionized water at $80^{\circ}C$ and were terminated by lyophilization technique. The aging products were finally analyzed by NMR and IR spectroscopy.

• Applied Biological Chemistry
• /
• v.9
• /
• pp.119-124
• /
• 1968

In order to learn the effect of timing and rate of potash fertilization in the rice plant nursery on the root growth and the vegetative growth of later stage a pot experiment was carried out employing 'Jaekun' a rice variety. Potassium Chloride was applied at the rate of $0{\sim}100g\;K_{2}O/3.3m^2$ right before, and 30 days after seeding. Forty-day old seedlings were transplanted three times successively at the one week intervals with the roots cut each time. Each subject was observed in rooting and other useful traits. A part of seedlings after the third root scission were cultured intact thereafter and the yield characters examined. The results were shown as: 1. The rate of sound seedlings was high in the case that a small amount of potassium was applied as the basic placement while the application of the fertilizer over $75g/3.3m^2$ (as $K_{2}O$) yielded a far less crops. 2. The plant height, number of tillers, number of leaves, and grass weight increased as the amount of potassium was elevated. However, the application of $50g\;K_{2}O/3.3m^2$ in the basic placement and that of $75g\;K_{2}O/3.3m^2$ were the peaks over which the above mentioned characters were weakened. 3. As the amount of potassium was increased the increment in number of rooting was notable, especially when the scission of roots was repeated within the limit of $50{\sim}75g\;K_{2}O/3.3m^2$. 4. In the maximum root newly shooted length indicated was about the same tendency although no statistical significance was observed. 5. The plant height, number of tillers, and variation of weight between grass and root indicated a similar tendency as the number of root shoot. 6. The differences in number of ears, grain yield, and weight of straw between the treatments were not so great but showed somewhat similar trend as in the growth of transplanted plants. In the treatment-100g $K_{2}O/3.3m^2$ the yield (ears, grain and straw) decreased as in the non-fertilized.

• Journal of the Korean Chemical Society
• /
• v.19 no.5
• /
• pp.386-393
• /
• 1975

Polystyrene and polystyrene blended with SBR were subjected to the mechanical degradation by roll mastication. The results obtained are as follows. 1. For the polystyrene which is blended with SBR, the overall shape of the molecular weight distribution curve moves from the higher molecular weight portion to the lower molecular weight portion, becomes narrower in breadth, and its peak becomes higher as the degradation proceeds. The final molecular weight distribution exhibits a relative uniformity. This is due to the fact that only the polymer molecules with the high molecular weight consisted in original polystyrene are degraded mechanically and produced the polymer molecules with the low molecular weight. 2. The scission number of polystyrene chains increases with mastication time, and the number of degraded polymer chains produced when the polymer is masticated for 100 minutes at 140, 150 and $160^{\circ}C$ are $2.36{\times}10^{20},\;1.76{\times}10^{20}\;and\;1.52{\times}10^{20}$, respectively. 3. The rate of the degradation of polystyrene decreases with the mastication temperature. The activation energy is found to have the negative value, -8.7 kcal/mole. Therefore it is indicated that the mechanical degradation is a chemical process of which the activation energy is supplied mechanically.

• Polymer(Korea)
• /
• v.36 no.6
• /
• pp.712-720
• /
• 2012

Thermal degradation for glass fiber-reinforced polyamide 66 composite (PA 66) with respect of thermal exposure time has been investigated using optical microscopy, scanning electron microscopy and Fourier transform infrared spectroscopy. As the thermal exposure time was prolonged, a slight increase in tensile strength for only initial stage and afterward, a proportional decrease of tensile strength was observed. These results can be explained by the increase of crystallinity, followed by the increase of crosslinking density, chain scission and the decrease in chain mobility, due to thermal oxidation with the exposure time. Fourier transform infrared spectroscopy results showed the increase of ketone peak and silica peak on the surface of thermally exposed PA 66. In addition, the thermal decomposition kinetics of PA 66 was analyzed using thermogravimetric analysis at three different heating rates. The relationship between activation energy and lifetime-prediction of PA 66 was investigated by several methodologies, such as statistical tool, UL 746B, Ozawa and Kissinger. The activation energy determined by thermogravimetric analysis had a relatively large value compared with that from the accelerated test. This may result in over-estimating the lifetime of PA 66. In this study, a master curve of exponential fitting has been developed to extrapolate the activation energy at various service temperatures.