• Geomechanics and Engineering
• /
• v.29 no.1
• /
• pp.91-97
• /
• 2022

The cohesive non-swelling soil (CNS) cushion technology has been widely applied in the subgrade and slope improvement at expansive soil regions. However, the mechanism of the inhibition effect of the CNS layer on expansive soil (ES) has not been fully understood. We performed four outdoor model tests to further understand the inhibition effect, including different kinds of upper layer and thickness, under the unidirectional seepage condition. The swelling deformation, soil pressure, and electrical resistivity were constantly monitored during the saturation process. It is found that when a CNS layer covered the ES layer, the swelling deformation and electrical resistivity of the ES layer decreased significantly, especially the upper part. The inhibition effect of the CNS layer increases with the increase of CNS thickness. The distribution of vertical and lateral soil pressure also changed with the covering of a CNS layer. The electrical resistivity can be an effective index to describe the swelling deformation of ES layer and analyze the inhibition effect of the CNS layer. Overall, the CNS deadweight and the ion migration are the major factors that inhibit the swelling deformation of expansive soil.

• Korean Journal of Organic Agriculture
• /
• v.30 no.3
• /
• pp.351-374
• /
• 2022

In recent years, the development of rice industry has been highly valued by the state. In hubei area, due to the development of the modernization and the shortage of labor, traditional way of rice cultivation methods is facing serious challenges, and economic benefits have become the decisive factor for the effective promotion and application of rice cultivation methods. According to the research results, first, in the input-side analysis, in the CCR model, D5, D12, D26, D28, D32, D36 farmers with high efficiency appear. The analysis result shows that among the 60 farmers, the average efficiency is 89%, and there is an inefficiency of 11%. In the BCC model, 14 farmers were identified as high-efficiency farmers, with an average efficiency of 0.9453. Second, in direct seeding cultivation of rice, the average scale efficiency is 0.9227, while the average pure technical efficiency is 0.9644. This shows that the effect of scale efficiency is greater than that of purely technical factors, ignoring the reasons for the low operational efficiency of direct seeding cultivation farmers. It can be predicted that with the further deepening of farmers' understanding of this planting mode, the proportion of rice direct seeding may be further expanded in the future. Relevant agricultural departments should further promote this technology to farmers, study the direct seeding technology using scientific methods, and evaluate the changes of this cultivation mode. The agricultural departments of government should concern about the climate risk assessment of direct seeding rice, the environmental impact assessment caused by the extensive use of herbicides, the application of mechanical technology in the process of direct seeding, the lodging of direct seeding rice, and other related issues.

• Conservation Science in Museum
• /
• v.28
• /
• pp.65-88
• /
• 2022

The characteristics and behavior of bullets are important because they are directly related to the firearm performance. However, research related to bullets have been small. In this paper, scientific analysis was conducted to find out the materials and manufacturing process of metal bullets during the Joseon Dynasty, owned by Korea Army Museum, and the types of firearms available were classified and organized according to the bullet diameter. As a result, bullets were classified into iron bullets, lead bullets, and lead-coated iron bullets. Most of the iron bullets and lead bullets were made from casting. Some iron bullets were made from forging. And the lead-coated iron bullet was made by pouring molten lead after putting the iron bullet into the mold. Finally, the bullets could be used for Hand Cannon, Matchlock Musket, Frankish Cannon, Hyeon-ja Cannon, Dae-Wiwon Cannon, Small Cannon, and Hong-Yi Cannon.

• Journal of Conservation Science
• /
• v.38 no.4
• /
• pp.301-313
• /
• 2022

We made a Korean white porcelain or Joseon Baekja jar and based on the raw materials used and reproductions of each stage, we aimed to compare and analyze the physicochemical changes of the raw materials such as clay at each manufacturing stage, as well as identify the characteristics and correlations. Although the basic main components of clay and glaze material are similar, their texture becomes denser in the process of bisque firing pottery (Chobeol-pyeon) and glaze firing pottery (Jaebeol-pyeon), and we confirmed that in addition to the tendency of increasing vitrification, low-temperature minerals such as mica and illite gradually disappeared, while high-temperature minerals such as cristobalite were newly created. This phenomenon has also been verified by the rapid decrease in absorption rate while the change in specific gravity was small. In addition, the color was greatly affected by the firing atmosphere, and the yellow-red chromaticity of the raw materials was higher during bisque firing but showed a rapidly decreasing characteristic during glaze firing. The value of magnetic susceptibility, which is related to iron (Fe) component, showed a tendency to decrease in glaze firing pottery. CT images were confirmed as a method that can indirectly estimate the change in the material properties of the object step-by-step for the entire object. In conclusion, the study of manufacturing stages of reproduction can provide basic data for scientific research on the estimation of porcelain and pottery making technology and changes in raw materials.

• International Journal of Computer Science & Network Security
• /
• v.22 no.12
• /
• pp.116-124
• /
• 2022

Information and communication technologies used in the social sphere are born due to the development of computer technologies. The main task of the distance learning process in higher education institutions is not to provide information, but to teach how to obtain and use it. The purpose of the article: to identify innovative approaches in the training of specialists in higher education institutions in the context of distance learning. Various innovative approaches to organizing the work of students of higher educational institutions in the context of distance learning are considered. Based on the conducted research, it is concluded that each of the approaches described by us outlines the study of the phenomenon of professional training of a specialist in the condition of distance learning. All the described approaches significantly contribute to the improvement of professional training of specialists, encourage students to self-improvement, professional development and enrich their professional competence in modern conditions. The emergence and spread of innovative technologies means not only a change in the activity itself and its inherent means and mechanisms of its implementation, but also a significant restructuring of goals, value orientations, specific knowledge, skills and abilities. Therefore, the current stage of the development of civilization, scientific and technological progress requires the emergence of such specialists who would have broad humanitarian thinking, would have good psychological training, would be able to build professional activities according to laws that take into account the relationship between economic productivity and creativity, as well as the desire of the individual for constant renewal, self-realization. Only such qualities will help you master the specifics of innovative technologies well. We see the prospects in the study of innovative approaches to training specialists in higher education institutions in the condition of distance learning in foreign countries.

• Nutrition Research and Practice
• /
• v.16 no.sup1
• /
• pp.70-88
• /
• 2022

Sodium is a physiologically essential nutrient, but excessive intake is linked to the increased risk of various chronic diseases, particularly cardiovascular. It is, therefore, necessary to accomplish an evidence-based approach and establish the Korean Dietary Reference Intakes (KDRIs) index, to identify both the nutritional adequacy and health effects of sodium. This review presents the rationale for and the process of revising the KDRIs for sodium and, more importantly, establishing the sodium Chronic Disease Risk Reduction Intake (CDRR) level, which is a new specific set of values for chronic disease risk reduction. To establish the 2020 KDRIs for dietary sodium, the committee conducted a systematic literature review of the intake-response relationships between the selected indicators for sodium levels and human chronic diseases. In this review, 43 studies published from January 2014 to December 2018, using databases of PubMed and Web of Science, were finally included for evaluating the risk of bias and strength of evidence (SoE). We determined that SoE of the relationship between dietary sodium and cardiovascular diseases, cerebrovascular disease, and hypertension, was moderate to strong. However, due to insufficient scientific evidence, we were unable to establish the estimated average requirement and the recommended nutrient intake for dietary sodium. Therefore, the adequate intake of sodium for adults was established to be 1,500 mg/day, whereas the CDRR for dietary sodium was established at 2,300 mg/day for adults. Intake goal for dietary sodium established in the 2015 KDRIs instead of the tolerable upper intake level was not presented in the 2020 KDRIs. For the next revision of the KDRIs, there is a requirement to pursue further studies on nutritional adequacy and toxicity of dietary sodium, and their associations with chronic disease endpoint in the Korean population.

• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.6 no.6
• /
• pp.395-402
• /
• 2016

Recently, firms confront to rapid environmental changes due to scientific development and demand change. Firms are trying to improve supply chain capability to react these environmental changes. Being in these improvement processes, it is important to collaborate with other partners in the supply chain. Firms have tried to outsource their in-house activity to other partners and have eliminated wasteful factors in their process and the supply chain is getting leaner. This study investigates the effect of waste factor degree on supply chain performance under external risks. Test results in this paper show that waste level has negative relationship with supply chain performance. The effect of waste level on the supply chain performance is influenced by external risk. As waste level increases, risk has moderating effect between waste level and supply chain performance. That means it is important to focus on utilization, productivity or integration properly for managing the external risk in order to improve the supply chain performance.

• The Journal of Health Technology Assessment
• /
• v.1 no.1
• /
• pp.22-26
• /
• 2013

Objectives: Balancing benefits and risks through the drug life cycle has been discussed for many decades. The objective of this study was to review the processes and tools currently proposed for benefit-risk assessment of medicinal drugs. It aimed to establish scientific and efficient drug safety management system based on the synthetic analysis of benefit-risk evidence. Methods: We conducted a review of exiting literatures published by regulatory agencies or initiatives. Not only quantitative methodologies but also qualitative method were compared to understand their key characteristics for the benefit and risk assessment of drugs. Results: Recently, benefit-risk assessments have more structured approaches to decision making as part of regulatory science. Regulatory agencies such as European Medicines Agency, FDA have prepared plans to apply benefit-risk assessment to regulatory decision making. Also many initiatives such as IMI (Innovative Medicine Initiative) have conducted research and published reports about benefit-risk assessment. For benefit-risk assessment, four kinds of methods are necessary. Frameworks such as BRAT (Benefit Risk Action Team) framework, PrOACT-URL provide guidance for the whole process of decision-making. Metrics are measurements of risk benefit. The estimation techniques are methods to synthesis and combine evidences from various sources. The utility survey techniques are necessary to explicit preferences of various outcome from stakeholders. Conclusion: There is the lack of widely accepted, validated model for benefit-risk assessment. Nor there is an agreement among academia, industry, and government on methods for the quantitative valuation. It is also limited by available evidence and underlying assumptions. Nevertheless, benefit-risk assessment is fundamental to improve transparency, consistency and predictability for decision making through the structured systematic approaches.

• Journal of the Korean Geosynthetics Society
• /
• v.22 no.4
• /
• pp.1-8
• /
• 2023

Space exploration is at the forefront of human scientific endeavors, and planetary exploration rovers play a critical role in studying planetary surfaces. Rover performance is especially vital for safely navigating steep terrain and delicate landscapes found on planets like Mars and the Moon. This paper offers a comprehensive overview of a landing testbed designed to simulate challenging extraterrestrial terrain and loose regolith. The paper briefly outlines lunar crater region topographical features and highlights the importance of these simulations in rover testing. It then explores previous landing testbed developments and describes the design process for a landing testbed to be installed in the dirty thermal vacuum chamber at the Korea Institute of Civil Engineering and Building Technology. Once realized, this proposed landing testbed will enable precise evaluations of rover mobility and exploration capabilities under lunar-like conditions, including high vacuum and extreme temperatures.

• The Journal of Korean Academy of Sensory Integration
• /
• v.6 no.1
• /
• pp.47-62
• /
• 2008

Introduction : Sensory Integration(SI) theory, science it is developed by an occupational therapist A. Jean Ayres, is the one of the most popular frames of reference used in occupational therapy(OT) intervention. It has been proved as a scientific theory especially in neuroscience discipline through abundant research and practice. Occupational therapists apply the SI therapy with strong clinical reasoning to improve adaptive behaviors of their clients and try to link the adaptive behaviors with occupational performance in the clients' everyday life. One of the manners regarding clinical reasoning is Top-down approach. In occupational therapy discipline, Top-down approach is well-reflected within two evaluation tools; Canadian Occupational Performance Measure(COPM) and Assessment of Motor and Process Skills(AMPS) and two models of practice; Canadian Model of Occupational Performance(CMOP) and Occupational therapy intervention process model(OTIPM). Objective : The purpose of this paper demonstrates how SI therapy can be employed within OTIPM and how the OT process (evaluation-intervention-outcome) can be structuralized based on the Top-down approach. This single-case study recognizes the impact of a SI therapy for a male adolescent on his occupational performance. Intervention Examined : "P" was 16 years old male adolescent with no diagnosis and junior of the high school when he was referred. P was always with mouth opened, showed difficulties in gathering things need to be prepared and managing and paying money for shopping, and his colleges dislike getting close to him because he can't was his body well. AMPS was administrated in initial evaluation and reevaluation of P's occupation performance, Bruininks-Oserestky Test of Motor Proficiency-2(BOT-2) was carried out to assess motor functions and perception skills related in sensory integration, and occupational therapist performed clinical observation in order to complement the evaluation quantitatively and quantitatively. Based on the evaluation, it is concluded that the SI therapy is primary means to improve P's occupational performance, and three therapeutic approaches were constructed; restorative, acquired and compensatory approach. P showed improved motor and process skills in occupational performance after undergone the occupational therapy. Conclusions : The sensory integration therapy was practical enough to build the bridge between the occupational performance(Top) and the underlying component problems (Bottom). The OTIPM was helpful to identify meaningful occupation for P and P's family within P's contexts, and the AMPS was valuable to analyze and clarify the cause of difficulties in the chosen occupational performance.