• Smart Structures and Systems
• /
• v.31 no.5
• /
• pp.517-529
• /
• 2023

Using a device composed of two lateral pressure plates (LPPs) and a steel reinforcement bar to apply horizontal pressure on slope surfaces, a newly developed prestress-reinforced embankment (PRE) is proposed, to which can be adopted in strengthening railway subgrades. In this study, an analytical model, which is available of calculating additional confining stress (σ_H) at any point in a PRE, was established based on the theory of elasticity. In addition, to verify the proposed analytical model, three dimensional (3D) finite element analyses were conducted and the feasibility in application was also identified and discussed. In order to study the performance of the PRE, the propagation of σ_H in a PRE was analyzed and discussed based on the analytical model. For the aim of convenience in application, calculation charts were developed in terms of three dimensionless parameters, and they can be used to accurately and efficiently predict the σ_H in a PRE regardless of the embankment slope ratio and LPP side length ratio. Finally, the potential applications of the proposed analytical model were discussed.

• ETRI Journal
• /
• v.45 no.5
• /
• pp.768-780
• /
• 2023

The application of unmanned aerial vehicles (UAVs) has recently attracted considerable interest in various areas. A three-dimensional multiple-input multiple-output concentric two-hemisphere model is proposed to characterize the scattering environment around a vehicle in an urban UAV-to-vehicle communication scenario. Multipath components of the model consisted of lineof-sight and single-bounced components. This study focused on the key parameters that determine the scatterer distribution. A time-variant process was used to analyze the nonstationarity of the proposed model. Vital statistical properties, such as the space-time-frequency correlation function, Doppler power spectral density, level-crossing rate, average fade duration, and channel capacity, were derived and analyzed. The results indicated that with an increase in the maximum scatter radius, the time correlation and level-crossing rate decreased, the frequency correlation function had a faster downward trend, and average fade duration increased. In addition, with the increase of concentration parameter, the time correlation, space correlation, and level-crossing rate increased, average fade duration decreased, and Doppler power spectral density became flatter. The proposed model was compared with current geometry-based stochastic models (GBSMs) and showed good consistency. In addition, we verified the nonstationarity in the temporal and spatial domains of the proposed model. These conclusions can be used as references in the design of more reasonable communication systems.

• Korean System Dynamics Review
• /
• v.8 no.2
• /
• pp.253-273
• /
• 2007

To measure the effect of school zone on housing cost, Linear Regression Model is widely used, and school zone is known as a key determinant of housing cost in Korea. However, when the Hierarchical Linear Model (HLM) is applied with the same data, school effect on housing cost becomes statistically non-significant. It is because HLM effectively separates the effect of individual housing's attributes from the group effect. In sum, the housing cost of Kangnam, where good public schools are located, is apparently is higher than that of Kangbuk. However, the school effect on housing cost (Level 2) becomes non-significant when individual housing's attributes (Level 1) are controlled with HLM.

• Journal of Magnetics
• /
• v.19 no.1
• /
• pp.37-42
• /
• 2014

The equivalent model of a permanent magnet (PM) plays an important role in electromagnetic system calculation. A type of subsection model for a PM bar is established, to improve the accuracy of the traditional equivalent circuit method. The mathematical expression, and its end verification condition, are presented. Based on the analytical method and finite element method, the leakage permeance calculation of a PM bar in an open magnetic circuit is investigated. As an example, for a given certain type of PM bar, the magnetic flux of each section is validated by experiment, and by simulation. This model offers a foundation for building a high accuracy equivalent magnetic PM model in an electromagnetic system.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2008.10a
• /
• pp.319-323
• /
• 2008

"How does advertising affect sales?" is the fundamental issue of modern advertising research. There is an interesting issue for estimating carry over effects of advertising on sales, and the aggregated data biases exist in the duration of advertising effect. This research suggests a modified model at micro-data using Koyck model (Koyck 1954) by estimated model the aggregate data, and empirically shows the aggregated data bias. Our modified model with the aggregated level of actual data is more appropriate than the base model for micro-data. The result shows that it is very important to consider the disaggregated data level in the analysis of dynamic effects of adverting such as lagged effects.

• Structural Engineering and Mechanics
• /
• v.57 no.3
• /
• pp.389-402
• /
• 2016

Based on the traditional mechanical model of thin-walled straight beam, the paper makes analysis and research on the pre-twisted thin-walled beam finite element numerical model. Firstly, based on the geometric deformation differential relationship, the Saint-Venant warping strain of pre-twisted thin-walled beam is deduced. According to the traditional thin-walled straight beam finite element mechanical model, the finite element stiffness matrix considering the Saint-Venant warping deformations is established. At the same time, the paper establishes the element stiffness matrix of the pre-twisted thin-walled beam based on the classic Vlasov Theory. Finally, by calculating the pre-twisted beam with elliptical section and I cross section and contrasting three-dimensional solid finite element using ANSYS, the comparison analysis results show that pre-twisted thin-walled beam element stiffness matrix has good accuracy.

• Proceedings of the KIEE Conference
• /
• 2000.07d
• /
• pp.3007-3009
• /
• 2000

In this paper, we design a Multi-Fuzzy model by means of clustering method and genetic algorithms for a nonlinear system. In order to determine structure of the proposed Multi-Fuzzy model. HCM clustering method is used. The parameters of membership function of the Multi-Fuzzy are identified by genetic algorithms. We use simplified inference and linear inference as inference method of the proposed Multi-Fuzzy model and the standard least square method for estimating consequence parameters of the Multi-Fuzzy. Finally, we use some of numerical data to evaluate the proposed Multi-Fuzzy model and discuss about the usefulness.

• Journal of electromagnetic engineering and science
• /
• v.14 no.3
• /
• pp.278-283
• /
• 2014

This paper presents a theoretical approach for a modified turnstile antenna suitable for satellite communication in order to investigate the current distributions of radiators and radiation characteristics with equivalent model analysis. The proposed equivalent model is composed of an ideally horizontal dipole antenna and vertically loaded top-hat radiating elements. The required isoflux pattern with wide beamwidth has been achieved by attaching top-hat elements to the main radiators. In addition to illustrating radiation patterns, electrical performances like current distributions have been analyzed by mathematically manipulating the equations derived from the equivalent horizontal and vertical dipole model.

• Journal of Information Processing Systems
• /
• v.14 no.1
• /
• pp.218-227
• /
• 2018

Vocal effort detection is important for both robust speech recognition and speaker recognition. In this paper, the spectral information entropy feature which contains more salient information regarding the vocal effort level is firstly proposed. Then, the model fusion method based on complementary model is presented to recognize vocal effort level. Experiments are conducted on isolated words test set, and the results show the spectral information entropy has the best performance among the three kinds of features. Meanwhile, the recognition accuracy of all vocal effort levels reaches 81.6%. Thus, potential of the proposed method is demonstrated.

• Structural Engineering and Mechanics
• /
• v.69 no.5
• /
• pp.479-486
• /
• 2019

Based on the displacement general solution of a pre-twisted Euler-Bernoulli beam, the shape function and stiffness matrix are deduced, and a new finite element model is proposed. Comparison analyses are made between the new proposed numerical model based on displacement general solution and the ANSYS solution by Beam188 element based on infinite approach. The results show that developed numerical model is available for the pre-twisted Euler-Bernoulli beam, and that also provide an accuracy finite element model for the numerical analysis. The effects of pre-twisted angle and flexural stiffness ratio on the mechanical property are also investigated.