• 대기
• /
• 제25권4호
• /
• pp.659-667
• /
• 2015

In this study, sensitivity of inflow wind speed and turbulent Schmidt number to pollutant dispersion in an urban street canyon is investigated, by comparing CFD-simulated results to wind-tunnel results. For this, we changed systematically inflow wind speed at the street-canyon height ($1.5{\sim}10.0m\;s^{-1}$ with the increment of $0.5m\;s^{-1}$) and turbulent Schmidt number (0.2~1.3 with interval of 0.1). Also, we performed numerical experiments under the conditions that turbulent Schmidt numbers selected with the magnitude of mean kinetic energy at each grid point were assigned in the street canyon. With the increase of the inflow wind speed, the model underestimated (overestimated) pollutant concentration in the upwind (downwind) side of the street canyon because of the increase of pollutant advection. This implies that, for more realistic reproduction of pollutant dispersion in urban street canyons, large (small) turbulent Schmidt number should be assigned for week (strong) inflow condition. In the cases of selectively assigned turbulent Schmidt number, mean bias remarkably decreased (maximum 60%) compared to the cases of constant turbulent Schmidt number assigned. At week (strong) inflow wind speed, root mean square error decreases as the area where turbulent Schmidt number is selectively assigned becomes large (small).

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2015년도 제51회 KOSCO SYMPOSIUM 초록집
• /
• pp.75-76
• /
• 2015

Lifted flame stabilization mechanism can be explained with constant Schmidt number from the equation of $H^{\ast}_L/d^2_o=const{\times}v_e^{(2Sc-1)/(Sc-1)}$. In this research, a method of local Schmidt number was applied in order to measure edge flame propagation velocities, and edge flame propagation velocity was calculated from the trend between lift-off height and nozzle flow rate.

• 한국지반공학회논문집
• /
• 제22권10호
• /
• pp.139-150
• /
• 2006

울산분지 퇴적암을 대상으로 Schmidt hammer 타격시험을 시행하여 일축 압축강도, 압열 인장강도, 탄성계수, 흡수율 및 간극율과의 상호 관계를 구명하였다. 기 연구된 결과는 여러 암종이 혼합된 결과로 실용적 적용에 어려움이 있어 지질학적 생성배경의 차이로 인한 원인을 배제하고 실용적 적용에 유용하도록 울산분지 퇴적암만을 대상으로 하여 연구를 시행하였다. Schmidt 햄머 반발지수와 각 실험결과상호간에 높은 상관성이 있으며 본 연구 결과 값으로 상호 교차검정을 한 결과도 만족할 수 있는 결과가 도출되었다.

• Structural Engineering and Mechanics
• /
• 제65권5호
• /
• pp.601-609
• /
• 2018

Steel bolts are used in the construction industry for a large variety of applications that range from fixing permanent installations to temporary fixtures. In the past much research has been focused on developing destructive testing techniques to estimate their pull-out load carrying capacity with very little attention to develop non-destructive techniques. In this regards the presented research work details the combined use of ultrasonic pulse velocity and Schmidt hammer tests to identify anchor bolts with faculty installation and to estimate their pull-out strength by relating it to the Schmidt hammer rebound value. From experimentation, it was observed that the load capacity of bolt depends on its embedment length, diameter, bond quality/concrete strength and alignment. Ultrasonic pulse velocity test is used to judge the quality of bond of embedded anchor bolt by relating the increase in ultrasonic pulse transit time to the presence of internal pours and cracks in the vicinity of steel bolt and the surrounding concrete. This information combined with the Schmidt hammer rebound number, R, can be used to accurately identify defective bolts which resulted in lower pull-out strength. 12 mm diameter bolts with embedment length of 70 mm and 50 mm were investigated using constant strength concrete. Pull-out load capacity versus the Schmidt hammer rebound number for each embedment length is presented.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 가을 학술발표회 논문집
• /
• pp.909-912
• /
• 2001

This paper presents the validities of the removal time of side forms considering the relationship between rebound number of P type schmidt hammer and compressive strength. According to test results, compressive strength of 40% of W/C at 12 hours shows 16kgf/$cm^{2}$ and 50% of W/C at 15 hours, 13kgf/$cm^{2}$. Rebound number at 9 hours after casting shows 13 and 9 (W/C 40% and W/C 50%). According to the regression analysis, rebound number of P type schmidt hammer to gain 50kgf/$cm^{2}$ of is estimated 20.1. It is thought that desirable rebound number of P type schmidt hammer to gain 50kgf/$cm^{2}$ is determined 25 considering safety factor.

• 한국수자원학회논문집
• /
• 제47권8호
• /
• pp.703-715
• /
• 2014

본 연구는 Schmidt 수(${\sigma}_c$)에 따른 부유사의 부유 거동 변화 및 흐름 특성의 변화를 살펴본 후, 그에 따라 계산된 성층 흐름의 척도가 되는 Flux Richardson 수($Ri_f$)와 Gradient Richardson 수($Ri_g$)를 근거로 타당한 ${\sigma}_c$의 범위를 산정하는 것을 목적으로 수행되었다. 부유사의 종류를 점착성 유사와 비점착성 유사로 구분하였으며 진동 흐름과 흐름 조건을 가정하고 1차원 연직 수치 모형을 이용하여 수치 실험을 수행하였다. 이 과정에서 ${\sigma}_c$가 난류 감소효과와 관계되는 상수인 것에 근거하여 부유사의 존재로 인한 난류 감소효과 고려 여부에 따른 흐름 특성의 변화를 살펴보았다. 그 결과, 흐름 조건에 관계없이 ${\sigma}_c$의 크기에 따라 부유 거동이 일관된 경향을 나타내는 것이 확인 되었으며 난류 감소효과를 고려하지 않는 경우 유속 및 난류 에너지가 과대 산정 되는 결과가 나타났다. 부유로 인한 성층화 조건을 형성하는 $Ri_f$ 및 $Ri_g$의 범위에 기초하여 결과를 분석하고 ${\sigma}_c$가 0.3에서 0.5의 범위에 해당될 때 성층 흐름 내 유사의 수직 혼합이 유효하게 계산된다는 결론이 도출되었다.

• 대한수의학회지
• /
• 제49권4호
• /
• pp.273-278
• /
• 2009

Neurofascin, one of the members of L1CAM, has been known to have some important roles during the development of nerve fibers. In order to investigate the role of neurofascin associated with the formation of Schmidt-Lantermann incisure in the sciatic nerve, the localization of neurofascin was studied with electron microscopy, immuno-fluorescence and immuno-electron microscopy. In the electron microscopy, the first formation of Schmidt-Lantermann incisure was checked at postnatal day 6 and the complete form of incisures traversing the whole myelin sheath began to be observed at postnatal day 8. In the immunofluorescence, neurofascin immunoreactive Schmidt-Lantermann incisures were first checked at postnatal day 6 and dramatically increased with aging by postnatal day 56. In the immunoelectron microscopy, neurofascin immunoreactive gold particles at the incisure forming sites were first observed at postnatal day 6 and the number of gold particles was increased as the animal was getting old by postnatal day 56. According to the present study, neurofascin is likely to have some relationships with Schmidt-Lantermann incisure formation.

• Computers and Concrete
• /
• 제15권3호
• /
• pp.473-484
• /
• 2015

In this study, the availability of Schmidt hammer has been investigated as a reliable method to determine the quality of concrete in irrigation networks. For this purpose, the 28-day compressive strength of concrete material used in the construction irrigation channel of Bafra lowland, which is one of the most fertile plains in Turkey was examined by means of concrete compression and as well as concrete Schmidt hammer in laboratory conditions. This study was carried out on cylindrical samples to represent the everyday concrete party ($150m^3$) produced by contractor firm as 3 replications. The statistical analysis of experimental data showed that the correlations between the values of 28-day compressive strength of Schmidt hammer and the rebound number was found to be 0.98. Differences of the compressive strength between compression testing and Schmidt hammer were statistically significant at P<0.01. In this context, it was found that the reliability of compressive strength of the concrete compression test are excellent, also the reliability of compressive strength of Schmidt hammer are fair in assessing the quality of concrete irrigation channels.

• 대한기계학회논문집B
• /
• 제29권7호
• /
• pp.837-845
• /
• 2005

In this paper, an investigation on high-Schmidt number (Sc=1670) mass transfer in turbulent flow around a rotating circular cylinder is carried out by Direct Numerical Simulation. The concentration field is computed for three different values of low Reynolds number, namely 161, 348 and 623 based on the cylinder radius and friction velocity. Statistical study reveals that the thickness of Nernst diffusive layer is very small compared with that of viscous sub-layer in the case of high Sc mass transfer. Strong correlation of concentration field with streamwise and vertical velocity components is observed. However, that is not the case with the spanwise velocity component. Instantaneous concentration visualization reveals that the length scale of concentration fluctuation typically decreases as Reynolds number increases. Statistical correlation between Sherwood number and Reynolds number is consistent with other experiments currently available.

• 한국구조물진단유지관리공학회 논문집
• /
• 제12권3호
• /
• pp.199-207
• /
• 2008

최근 구조물이 노후화되면서 기존 구조물과 시공품질을 관리하는 비파괴검사 평가의 요구가 증가되고 있다. 콘크리트 구조물의 압축강도 추정의 중요성이 건설업계에서 또한 점차적으로 증대되고 있는 실정이고, 시공관리와 품질관리에 있어서 중요한 요소이다. 본 연구는 콘크리트의 압축강도를 비교하기 위한 비파괴 검사법 중 슈미트해머 시험과 충격반향기법을 이용하여 수행되었다. 콘크리트 압축강도와 슈미트해머에 의한 반발경도 값과 충격반향기법 실험결과와의 관계를 알아내는데 초점을 두었으며, 콘크리트의 압축강도와 반발경도 값은 밀접한 관계가 있음을 알 수 있었다.