• 한국광학회지
• /
• 제5권2호
• /
• pp.212-216
• /
• 1994

원적외선 영역인 $8-12.\mu$m 대역의 열상장비 주사광학계를 설계 제작하였다. 검출기로 5개 소자의 SP-RITE HgCdTe를 사용하는 직병렬 주사를 위해 수평 및 수직주사에는 각각 회전다면거울과 진동평면거울을 사용하였으며, 주사연결거울로는 구면거울을 사용하여 주사거울의 크기 및 입사동에서의 동수차를 최소화 하였다. 주사광학계는 $40^{\circ}\times26.67^{\circ}$의 넓은 주사시야를 갖는다. 회절 변조전달함수의 계산결과 회절한계의 성능을 만족하였으며 제작 및 시험 결과 고분해능의 열영상을 얻을 수 있었다.

• 방송과미디어
• /
• 제6권2호
• /
• pp.84-101
• /
• 2001

In this paper, we present a primitive system design of a super multi-view(SMV) 3-D display system based on a focused light array(FLA) concept using reflective vibrating scanner array(ViSA). The parallel beam scanning using a vibrating scanner array is performed by moving left and right an array of curvature-compensated mirrors or diamond-ruled reflective grating attached to a vibrating membrane. The parallel laser beam scanner array can replace the polygon mirror scanner which has been used in the SMV 3-D display system based on the focused light array(FLA) concept proposed by Kajiki at TAO(Telecommunications) Advancement Organization). The proposed system has great advantages in the sense that it requires neither huge imaging optics nor mechanical scanning pals. Some mathematical analyses and fundamental limitations of the proposed system are presented. The proposed vibrating scanner array, after some modifications and refinements, may replace polygon mirror-based scanners in the near future.

• 한국기계가공학회지
• /
• 제19권6호
• /
• pp.96-101
• /
• 2020

In this paper, we present the results of our research to perform 3D laser scanning functions by adding a focusing lens to a conventional 2D laser scanner. For the optical design, the ray-tracing technique was used along with a total of four lenses as the variable incident focusing lens, the collimating lens, and the F-Theta lens. As design variables, the curvature of the incident focusing lens (Lens #1) was assumed to be us, l mm and sumed mm, and the incident angles were set at 0cidenus, l. In addition, the distance between the focusing lens and the collimating lens was set to vary from 5 mm to 15 mm. When the incident focal length was varied from 5 mm to 15 mm, the exit focal length was calculated to vary from 67.5 mm to 56.8 mm for the lens with R = 100 mm and from 108.5 mm to 99.0 mm for the lens with R = 150 mm. When the incident angle was 0°, the focal aberration was only slightly observable at 10㎛ in both the x- and y-direction. At 7.5° was the focal aberration of approximately 20~50㎛ was measured at 20㎛. To investigate the chromatic aberration of the designed optical device, the distortion of the focus was observed when the 550 nm beam was simulated on lens designed for a 980 nm wavelength.

• 한국레이저가공학회지
• /
• 제10권3호
• /
• pp.11-14
• /
• 2007

A trepanning optics is the optical system which makes focus laser beam rotate and incline to the material processing surface. The trepanning optics is used in order to improve the quality of laser drilling process and control the taper of drilling diameter. In order to make trepanning optics, we can use the eccentricity of lens, scanner using two mirror, dove prism, or wedge. Among these method, in this paper wedge is used for trepanning optics. The wedge trepanning optics has advantage on the high speed of rotation. In this paper, we design the wedge trepanning optics using ray tracing. ements and engine design variables of system to satisfy the customer's requirements.

• Journal of the Optical Society of Korea
• /
• 제4권1호
• /
• pp.37-42
• /
• 2000

In this paper, we propose a super multi-view (SMV) 3-D display system using a vibrating scanner array (ViSA). The parallel beam scanning using a vibrating scanner array is performed by moving back and forth an array of curvature-compensated mirrors attached to two vibrating membranes. The parallel laser beam scanner array can replace the polygon mirror scanner which has been used in the SMV 3-D display system based on the focused light array(FLA) concept. The proposed system has great advantages in the sense that it requires neither huge imaging optics normechanical scanning parts. Some mathematical analyses and fundamental limitations of the proposed system are presented. The proposed vibrating scanner array, after some modifications and refinements, will replace polygon mirror-based scanners in the near future.

• 대한전자공학회논문지
• /
• 제26권1호
• /
• pp.69-77
• /
• 1989

POS시스템에서 사용되는 바토드 심볼 판독을 위한 홀로곤 스캐너를 개발하였다. 제작된 시스템은 주사 광학부, 광 검출부, 비디오 신호 처리부, 그리고 전치 처리기로 구성되어 있으며, 기존의 다면경을 이용한 바코드 스캐너에 비하여 광학부가 간단하고 바코드 판도면에서 향상된 성능을 얻을 수 있었다. 위치가 변화된 바코드 라벨위에 이루어지는 고밀도 스캔 패턴을 모든 방향에서 판독하기 위하여 실시간으로 디코딩을 수행할 수 있는 새로운 로직을 제안하여 하드웨어와 클락 주파수를 줄임으로써 보다 효율적인 시스템을 구성하였다. 실험 결과, 제작된 시스템은 빠른 처리속도와 기울어진 심볼에 대해서도 좋은 판독율을 나타내었다.

• Current Optics and Photonics
• /
• 제2권6호
• /
• pp.554-562
• /
• 2018

This study presents a color 3D scanner based on the laser structured-light imaging method that can simultaneously acquire 3D shape data and color of a target object using a single camera. The 3D data acquisition of the scanner is based on the structured-light imaging method, and the color data is obtained from a natural color image. Because both the laser image and the color image are acquired by the same camera, it is efficient to obtain the 3D data and the color data of a pixel by avoiding the complicated correspondence algorithm. In addition to the 3D data, the color data is helpful for enhancing the realism of an object model. The proposed scanner consists of two line lasers, a color camera, and a rotation table. The line lasers are deployed at either side of the camera to eliminate shadow areas of a target object. This study addresses the calibration methods for the parameters of the camera, the plane equations covered by the line lasers, and the center of the rotation table. Experimental results demonstrate the performance in terms of accurate color and 3D data acquisition in this study.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2013년도 춘계학술대회 논문집
• /
• pp.1267-1268
• /
• 2013

• 한국광학회지
• /
• 제14권4호
• /
• pp.473-479
• /
• 2003

본 연구는 스캔된 이미지의 원본색이 모니터에 그대로 디스플레이 될 수 있게 하는 것을 목적으로 한다. 색보정 과정은 스캐너의 색 특성 묘사를 통한 원본색의 XYZ 추정, 기준 광원의 차이를 고려한 XYZ 변환, XYZ와 RGB간의 색공간 변환으로 구성된다. 특히, XYZ 추정에 있어서 스캐너에 입사되는 빛의 세기와 출력신호간의 비선형적 관계를 두 구간으로 나누어 묘사함으로써 그 정확도를 높였다 EPSON Expression 1680 스캐너를 대상으로 실시한 결과, 228가지 기준색의 기준값과 추정값의 평균 색차는 1.47 $\Delta$ $E_{UV}$ * 이었으며, 36가지의 유채색과 22가지의 무채색으로 구성된 시험색의 평균 색차가 각각 1.51 $\Delta$ $E_{UV}$ * 와 0.90 $\Delta$ $E_{UV}$ * 이었다. 또한 시험색 36가지에 대해 기준값과 추정값으로 부터 산출된 sRGB 모니터 입력신호를 동일 모니터에 디스플레이한 결과, 두 이미지의 색이 동일하게 보였다. sRGB 모니터 입력신호를 동일 모니터에 디스플레이한 결과, 두 이미지의 색이 동일하게 보였다.

• 한국레이저가공학회지
• /
• 제18권1호
• /
• pp.1-6
• /
• 2015

High welding speed and narrow weld seam are favorable for welding of magnesium alloy. Magnesium alloy is recommended for the smart frame because it has several advantages such as low density, high thermal conductivity, EMI shielding capability and good cast ability. This study is for the assembly welding of the magnesium smart frame with high productivity, good performance and low cost. The window for battery on AZ91D frame produced by die-casting was prepared by CNC machining. Corresponding AZ31 blank of 0.2mm thickness was prepared by die-blanking cut. All system set was fixed at the stationary bed but the laser beam was manipulated by scanner up-to 1,000mm/s speed. The weld joint between AZ31 sheet and AZ91D frame was welded by fiber laser on 850~1,000W output power. The joint showed penetration enough but some humping bead. The distortion by the weld heat was almost free because of the quick dissipation of the heat by small beam size and fast welding. Consequently, the thinner magnesium foil was assembled successfully to the magnesium frame of mobile phone.