• 복식문화학회:학술대회논문집
• /
• 복식문화학회 2005년도 Joint International Conference
• /
• pp.48-54
• /
• 2005

In order to mass-customize clothes, it is essential to take into account individual body shape using computerized 3D body models. This paper describes the development of an interactive body model that can be altered to match individual body perimeter, postures and depth for the purpose of computerized pattern making. Construction of the body model requires the extraction of necessary points, adjustment of coordinate points, linking of points by spline curves, control of section lengths and selectability of various hip types. Front to back depth of the model is adjusted by scaling ratio. We had a great result for controlling perimeter, posture and depth of body shapes. The results support the adaptability and potential usefulness of the posture and depth adjustable body model.

• Nuclear Engineering and Technology
• /
• 제32권2호
• /
• pp.108-127
• /
• 2000

Hot leg break LBLOCA(Large Break LOCA) had a potential to be a containment maximum pressure accident in YGN3&4, which was induced from excessive conservatism in the CE analysis methodology of mass and energy release. This study conducted mass and energy release experiment for the hot leg break LBLOCA during post blowdown with an integral test facility, SNUF(Seoul National University Facility). This facility simulated YGN 3&4 with volume ratio of 1/1140 based on Ishii's three level scaling. Experiment showed that SI(Safety Injection) water refilled cold leg first and core later. SI water was vaporized in the core, which resulted in the repressurization of reactor. This increase of pressure drove the water in cold leg to flow up half height of U tubes. However, since the water was drained back soon, the release through the SG side broken section by evaporation was negligibly small. This study also provided experimental assessment of RELAP5 results by KAERI for the release through the SG side broken section.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.571-574
• /
• 2009

Metal oxide/metal bilayer structures are explored as contacts with a low injection barrier in organic thin-film transistors (OTFTs) in an effort to realize their true potential for low-cost electronics. OTFTs with a bilayer electrode of $WO_3$ (10nm) and Al shows a saturation mobility as large as 0.97 $cm^2$/Vsec which are comparable to those of Au-based control samples (~0.90 $cm^2$/Vsec). Scaling of contact resistance with respect to the thickness of $WO_3$ layer is also discussed.

• 한국마이크로전자및패키징학회:학술대회논문집
• /
• 한국마이크로전자및패키징학회 2002년도 춘계 기술심포지움 논문집
• /
• pp.252-254
• /
• 2002

Metal oxides with high dielectric constants have the potential to expend scaling of transistor gate capacitance beyond that of ultrathin silicon dioxide. However, during deposition of most metal oxides on silicon, an interfacial region of SiOx is formed and limits the specific capacitance of the gate structure. We deposisted aluminum oxide and examined the composition of the interfacial layer by employing high-resolution X-ray photoelectron spectroscopy and X-ray reflectivity. We find that the interfacial region is not pure SiO$_2$, but is composed of a complex depth-dependent ternary oxide of $AlSi_xO_y$ and the pure SiO$_2$.

• Wind and Structures
• /
• 제26권3호
• /
• pp.147-161
• /
• 2018

For wind engineering applications downbursts are, presently, almost exclusively modeled, both experimentally and numerically, as transient impinging momentum jets (IJ), even though that model contains none of the physics of real events. As a result, there is no connection between the IJ-simulated downburst wind fields and the conditions of formation of the event. The cooling source (CS) model offers a significant improvement since it incorporates the negative buoyancy forcing and baroclinic vorticity generation that occurs in nature. The present work aims at using large-scale numerical simulation of downburst-producing thunderstorms to develop a simpler model that replicates some of the key physics whilst maintaining the relative simplicity of the IJ model. Using an example of such a simulated event it is found that the non-linear scaling of the velocity field, based on the peak potential temperature (and, hence, density) perturbation forcing immediately beneath the storm cloud, produces results for the radial location of the peak radial outflow wind speeds near the ground, the magnitude of that peak and the time at which the peak occurs that match well (typically within 5%) of those produced from a simple axi-symmetric constant-density dense source simulation. The evolution of the downdraft column within the simulated thunderstorm is significantly more complex than in any axi-symmetric model, with a sequence of downdraft winds that strengthen then weaken within a much longer period (>17 minutes) of consistently downwards winds over almost all heights up to at least 2,500 m.

• Ocean and Polar Research
• /
• 제33권2호
• /
• pp.99-111
• /
• 2011

To estimate the effects of limitation nutrients for phytoplankton growth and its influences on short-term variations of a winter phytoplankton community structure, we investigated the abiotic and biotic factors of surface and bottom waters at 20 stations of inner and offshore areas from 6 to 7 February in Gwangyang Bay, Korea. Also, several algal bio-assay studies were conducted to identify any additional nutrient effects on phytoplankton assemblage using surface water for the assay. The dominant species in the bay was diatom Skeletonema costatum, which occupied more than 70% of total species in most stations (St.1-16) of the inner bay. According to a cluster and multidimensional scaling (MDS) analysis based on phytoplankton community data from each station, the bay was divided into three groups. The first group included stations from the south-western parts of Myodo lsland, which can be characterized as a semien-closed eutrophic area with high phytoplankton abundance. The second group included most stations from the north-eastern part of Myodo lsland, influenced indirectly by surface water currents from offshore of the bay. The standing phytoplankton crops were lower than those of the first group. The other cluster was restricted to samples collected from offshore of the bay. In the bay, silicon (Si) and phosphorus (P) were not a major limiting factor for phytoplankton production. However, since the DIN: DIP and DSi: DIN ratios clearly demonstrated that there were potential stoichiometric N limitations, nitrogen (N) was considered as a limiting factor. Based on the algal bio-assay, in vivo fluorescence values in N (+) added experiments were higher compared to control and P added experiments. Our results suggested that nitrogen may act as one of the most important factors in controlling primary production during winter in Gwangyang Bay.

• 대한지하수환경학회지
• /
• 제5권4호
• /
• pp.215-222
• /
• 1998

지하수 세균 군집에 미치는 환경요인의 영향을 분석하기 위하여, 서울 시내에서 음용수로 사용하는 2개 정점과 음용수외 생활용수로 사용하고 있는 8개 정점을 대상으로 조사하였다. 물리.화학적 환경요인과 중금속의 농도, 및 세균 군집의 분포 등 40개 변수를 분석한 결과, 음용수로 사용하는 정점을 제외한 나머지 정점에서 질산성 질소와 암모니아가 용수목적별 수질기준의 기준치 이상으로 측정되었다. 총세균은 5.1~41.4$\times$$10^{5}$cells/ml 범주로, 종속영양세균과 기능성 세균군집은 0.01~29.6$\times$$10^4$cfu/ml의 범주로 조사되었다. 세포외 효소의 활성도는 0.005~11.3$\mu$M/l/hr 의 범주로 나타났고, lipase, phophatase, $\beta$-glucosidase, cellulase, chitinase, amylase 순으로 활성도가 나타났다. 정점별로 조사된 세균 군집에 미치는 환경요인의 상호관계는 대응분석(correspondence analysis)과 다차원 척도법 분석(multidimensional scaling; MDS)으로 하였으며, 그 결과 4개의 집단으로 구분되었으며, 세균 군집에 미치는 주요한 환경요인은 정점별 잠재오염원과 일치하는 양상을 보였다.다.

• ALGAE
• /
• 제23권4호
• /
• pp.277-288
• /
• 2008

The relationship between nutrients and phytoplankton dynamics was investigated daily from 12 April to 22 July 2003 in Sagami Bay, Japan. According to multidimensional scaling (MDS) and cluster analysis, phytoplankton community was divided into four distinct groups. The first group was consisted of centric diatom species, such as Guinardia spp., Detonula spp., Letocylindrus danicus, Skeletonema costatum, Eucampia zodiacus and Chaetoceros spp.. The second and third clusters comprised mainly diatoms and dinoflagellates, respectively. The other cluster was restricted to the samples collected during the last sampling period when the rainfall and river discharge was frequently recorded. Canonical correspondence analysis (CCA) was applied to analyze four groups respectively, which focused on the effects of nutrients concentration and ratio on phytoplankton variations. Based on CCA analysis, most species of centric diatom were negatively correlated with DSi concentrations and Si/N ratio. Nutrients were strongly limited phytoplankton growth during the summer when the rainfall was not observed, whereas river discharge by rainfall and counterclockwise coastal currents (although the surface circulation pattern is often altered by Kuroshio Current, the counterclockwise coastal currents are generally dominant) has brought phytoplankton population accumulation and triggered the micoalgae growth in western part of the bay. Phosphorous (P) was strongly limited after significantly increases in the phytoplankton abundances. However, silicate (Si) was not a major limiting factor for phytoplankton production, since Si/DIN and Si/P ratio did not create any potential stoichiometric limitation. This indicates that high Si availability contributes favorably to the maintenance of diatom ecosystems in Sagami Bay.

• 한국해양공학회지
• /
• 제31권4호
• /
• pp.257-265
• /
• 2017

In this study, a series of numerical simulations was conducted in order to design a truncated mooring line with a static similarity to the prototype. A finite element method based on minimizing the potential energy was utilized to describe the dynamics of mooring lines. The prototype mooring lines considered were installed at a water depth of 1,000 m, whereas the KRISO ocean engineering basin (OEB) in Daejeon has a water depth of 3.2 m, which represents 192 m using a scaling of 1:60. First, an investigation for the design of the truncated mooring line was carried out to match the static characteristics of the KRISO Daejeon OEB environment. Then, the same procedure was performed with the KRISO new deepwater ocean engineering basin (DOEB) that is under construction in Busan. This new facility has a water depth of 15 m, which reflects a real scale depth of 900 m considering the 1:60 scaling factor. A finite element method was used to model the mooring line dynamics. It was found that the targeted truncated mooring line could not be designed under the circumstances of the KRISO OEB with any material properties, whereas several mooring lines were easily matched to the prototype under the circumstances of the KRISO DOEB.

• Journal of Periodontal and Implant Science
• /
• 제49권3호
• /
• pp.158-170
• /
• 2019

Purpose: This study investigated the association between health status and tooth loss based on data from the National Health Insurance Service-Health Examinee Cohort in 2002-2015. Methods: Multivariate Cox proportional hazards regression analyses were applied to a longitudinal retrospective database, which was updated and newly released in 2018, to assess the association between health status and tooth loss while adjusting for potential confounders among sociodemographic and economic factors (sex, age, household income, insurance, and presence of disability), general and oral health status (body mass index [BMI], smoking and drinking status, periodic dental visits and scaling, and brushing before sleep), and comorbid disease (hypertension, diabetes mellitus [DM], and Charlson comorbidity index [CCI]). Results: Among 514,866 participants from a South Korean population, 234,247 (45.5%) participants satisfying the inclusion criteria were analyzed. In the adjusted multivariate analysis, sex, age, household income, insurance, presence of disability, BMI, smoking and drinking status, periodic scaling, tooth brushing before sleep, DM, and CCI showed statistically significant associations with the loss of at least 1 tooth. The risk of experiencing a loss of ${\geq}4$ teeth was associated with an increase in age (in those 50-59 years of age: hazard ratio [HR], 1.98; 95% confidence interval [CI], 1.93-2.03; in those 60-69 years of age: HR, 2.93; 95% CI, 2.85-3.02; and in those 70-79 years of age: HR, 2.93; 95%, CI 2.81-3.05), smoking (HR, 1.69; 95% CI, 1.65-1.73), and DM (HR, 1.43; 95% CI, 1.38-1.48). Conclusions: The results of this study showed that the risk of experiencing tooth loss was related to multiple determinants. DM and smoking were especially significantly associated with tooth loss.