• 치위생과학회지
• /
• 제19권3호
• /
• pp.190-197
• /
• 2019

Background: The Internet has advantages in terms of accessibility and amount of information, and the search for health information over the Internet is increasing exponentially. The purpose of this study is to analyze the information generated about some dental treatment on the internet by year. Methods: Naver Knowledge (JisikIn in Korean) which is an interactive search service was selected as the first search site in Korea. Scaling, wisdom tooth extraction, and endodontic treatment that can be paid by Korean health insurance were selected. Finally, 4,729 questions about scaling, 23,963 wisdom teeth extraction questions and 17,733 endodontic treatment questions were extracted. The question contents, the information about the questioner and the answerer, and an error of answers were investigated. Frequency analysis was used and chi-square test was used if necessary. Results: The most frequently asked questions were discomfort and dissatisfaction after the treatment. The need for treatment was the second in questions of the wisdom tooth extraction and endodontic treatment, but the health insurance benefit was the second in dental scaling. Most of the questioners didn't disclose personal information. The public answered the most in 2013~2014, but the highest percentage of the respondents was experts in 2017. Responses were mostly personal experience, but showed a tendency to decrease with years, and professional knowledge showed an increasing tendency. The error of the answer has also gradually decreased. Conclusion: Questions about dental care over the Internet are increasing exponentially, experts are responding increasingly, and errors in answers are decreasing. Nevertheless, it is necessary to pay attention to the related expert group to prevent misinformation.

• Journal of Information Processing Systems
• /
• 제7권3호
• /
• pp.435-446
• /
• 2011

Microprocessors are becoming increasingly vulnerable to soft errors due to the current trends of semiconductor technology scaling. Traditional redundant multi-threading architectures provide perfect fault tolerance by re-executing all the computations. However, such a full re-execution technique significantly increases the verification workload on the processor resources, resulting in severe performance degradation. This paper presents a pro-active verification management approach to mitigate the verification workload to increase its performance with a minimal effect on overall reliability. An anomaly-speculation-based filter checker is proposed to guide a verification priority before the re-execution process starts. This technique is accomplished by exploiting a value similarity property, which is defined by a frequent occurrence of partially identical values. Based on the biased distribution of similarity distance measure, this paper investigates further application to exploit similar values for soft error tolerance with anomaly speculation. Extensive measurements prove that the majority of instructions produce values, which are different from the previous result value, only in a few bits. Experimental results show that the proposed scheme accelerates the processor to be 180% faster than traditional fully-fault-tolerant processor with a minimal impact on overall soft error rate.

• 한국통신학회논문지
• /
• 제18권12호
• /
• pp.1806-1814
• /
• 1993

본 논문에서는 음성 신호기의 4.8 Kbps에서 효율적인 배음 축척과 결합된 트리 부호기를 실현한다. 음성신호를 2대 1 압축하기 위해 TDHS 알고리즘을 사용한다. 이 과정은 4.8 Kbps에서 6.4 KHz 샘플링율을 적용하면 트리 부호기에 1.5 비트/샘플을 할당할 수 있다. 트리 부호기의 견실성은 short-term 예측기의 적응시 사용되는 입력 신호를 효율적 선택함으로써 개선되어진다. 또한 채널에서 전송에러기 트리 부호기의 성능은 피치 예측기에 스무더를 부가함으로써 개선된다. 배음 축척과 결합된 트리 부호기는 4.8 Kbps 전송률에서 좋은 질의 음성을 출력한다.

• 한국항공우주학회지
• /
• 제41권7호
• /
• pp.532-538
• /
• 2013

본 논문은 편대비헹에서 영상만을 이용하여 선도기의 자세를 예측 하는 알고리즘 개발에 대해 논하고 있다. X-PLANE 시뮬레이터를 이용하여 획득한 영상에 SURF(Speed Up Robust Features)알고리즘을 이용하여 특징점을 추출 하였다. 그리고 자세예측 방법은 POSIT(Pose from Orthography and Scaling with Iteration) 알고리즘을 사용하였다. 결론적으로 우리는 영상만을 이용한 자세추정법이 $1.1{\sim}1.76^{\circ}$의 작은 추정오차 결과를 나타냄을 확인할 수 있었다.

• 한국정보통신학회논문지
• /
• 제14권1호
• /
• pp.213-224
• /
• 2010

본 논문에서는 보정 영상을 프로젝터가 표현할 수 있는 범위로 콘트라스트(contrast)를 조절하여 주는 요소(scaling factor)를 적용하여 색 보정영상을 획득하는 방법을 제안한다. 이 조절 요소는 입력영상과 사용된 표면의 평균 밝기를 이용하여 계산하였다. 또한 사용된 프로젝터 및 카메라의 특성화 과정에서 오는 오차와 부정확성을 해결하기 위하여 프로젝터와 카메라 양단간의 관계를 적용한다. 실험 결과에서 제안한 색 보정 방법이 임의의 표면으로 입력된 다양한 영상에 대하여 밝기를 유지하면서 클리핑 결함은 감소되어 화질이 개선된 것을 확인하였다.

• 대한전기학회논문지:전력기술부문A
• /
• 제48권1호
• /
• pp.36-43
• /
• 1999

This paper proposes a new hybrid genetic algorithm for auto-tuning fuzzy controllers improving the performance. In general, fuzzy controllers use pre-determined moderate membership functions, fuzzy rules, and scaling factors, by trial and error. The presented algorithm estimates automatically the optimal values of membership functions, fuzzy rules, and scaling factors for fuzzy controllers, using a hybrid genetic algorithm. The object of the proposed algorithm is to promote search efficiency by the hybrid optimization technique. The proposed hybrid genetic algorithm is based on both the standard genetic algorithm and a modified gradient method. If a maximum point is not be changed around an optimal value at the end of performance during given generation, the hybrid genetic algorithm searches for an optimal value using the the initial value which has maximum point by converting the genetic algorithms into the MGM(Modified Gradient Method) algorithms that reduced the number of variables. Using this algorithm is not only that the computing time is faster than genetic algorithm as reducing the number of variables, but also that can overcome the disadvantage of genetic algoritms. Simulation results verify the validity of the presented method.

• Journal of Electrical Engineering and Technology
• /
• 제9권2호
• /
• pp.532-540
• /
• 2014

It is necessary to measure the current of rotor for controlling the active and reactive power generated by the stator side of the doubly fed induction generator (DFIG) system. There are offset and scaling errors in the current measurement. The offset and scaling errors cause one and two times current ripples of slip frequency in the synchronous reference frame of vector control, respectively. This paper proposes a compensation method to reduce their ripples. The stator current is variable according to the wind force but the rotor current is almost constant. Therefore input of the rotor current is more useful for a compensation method. The proposed method adopts the synchronous d-axis current of the rotor as the input signal for compensation. The ripples of the measurement errors can be calculated by integrating the synchronous d-axis stator current. The calculated errors are added to the reference current of rotor as input of the current regulator, then the ripples are reduced. Experimental results show the effectiveness of the proposed method.

• 한국도로학회논문집
• /
• 제18권2호
• /
• pp.51-60
• /
• 2016

PURPOSES : The applicability of the mechanics-based similarity concept (suggested by Feng et al.) for determining scaled variables, including length and load, via laboratory-scale tests and discrete element analysis, was evaluated. METHODS: Several studies on the similarity concept were reviewed. The exact scaling approach, a similarity concept described by Feng, was applied in order to determine an analytical solution of a free-falling ball. This solution can be considered one of the simplest conditions for discrete element analysis. RESULTS : The results revealed that 1) the exact scaling approach can be used to determine the scale of variables in laboratory tests and numerical analysis, 2) applying only a scale factor, via the exact scaling approach, is inadequate for the error-free replacement of small particles by large ones during discrete element analysis, 3) the level of continuity of flowable materials such as SCC and cement mortar seems to be an important criterion for evaluating the applicability of the similarity concept, and 4) additional conditions, such as the kinetics of particle, contact model, and geometry, must be taken into consideration to achieve the maximum radius of replacement particles during discrete element analysis. CONCLUSIONS : The concept of similarity is a convenient tool to evaluate the correspondence of scaled laboratory test or numerical analysis to physical condition. However, to achieve excellent correspondence, additional factors, such as the kinetics of particles, contact model, and geometry, must be taken into consideration.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.399-402
• /
• 2006

A new voltage-scaled compensation pixel which employs 3 p-type poly-Si TFTs and 2 capacitors without additional control line has been proposed and verified. The proposed pixel does not employ the $V_{TH}$ memorizing and cancellation, but scales down the inevitable $V_{TH}$ variation of poly-Si TFT. Also the troublesome narrow input range of $V_{DATA}$ is increased and the $V_{DD}$ supply voltage drop is suppressed. In our experimental results, the OLED current error is successfully compensated by easily controlling the proposed voltage scaling effects.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 추계학술대회 논문집 학회본부
• /
• pp.126-129
• /
• 1997

This paper propose a new hybrid genetic algorithm for auto-tunig auzzy controller improving the performance. In general, fuzzy controller used pre-determine d moderate membership functions, fuzzy rules, and scaling factors, by trial and error. The presented algorithm estimates automatically the optimal values of membership functions, fuzzy rules, and scaling factors for fuzzy controller, using hybrid genetic algorithms. The object of the proposed algorithm is to promote search efficiency by overcoming a premature convergence of genetic algorithms. Hybrid genetic algorithm is based on genetic algorithm and modified gradient method. Simulation results verify the validity of the presented method.