• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.762-767
• /
• 2008

Estimated values for maximum lift coefficients of a light airplane, ChanGong-91, derived from an analytical method using a test database, a computational fluid dynamic method, a wind tunnel test, and a flight test are compared. The DATCOM method and VSAERO code are applied as the analytical method and the computational fluid dynamic method, respectively, in order to estimate the maximum lift coefficients of a light airplane. The wind tunnel test is conducted using a 1/14.5 scaled model installed in a closed circuit type wind tunnel. For the flight test approach, the wings-level power-off stall tests are performed to obtain the maximum lift coefficients. As a point of reference for the flight test results of the maximum lift coefficients, the differences of both estimates derived from the DATCOM method and the wind tunnel test data are smaller than those derived from VSAERO.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2000년도 춘계 학술발표회 논문집 Proceedings of EESK Conference-Spring
• /
• pp.409-416
• /
• 2000

This research aims at evaluating the seismic performance of the existing R/C bridge piers which were nonseismically or seismically designed in accordance with the provision of Korea Highway Design Specification. Further experimental investigations have been doing to figure out the retrofitting effects of nonseismic R/C bridge piers confined with glass fiber at the plastic hinge zone. Pseudo-dynamic tests have been carried out on nine scaled R/C column specimens to investigate their hysteretic behavior under earthquake loading, Test parameters are axial load input ground motion confinement steel ration glass fiber and etc,

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2009년도 춘계 학술대회 제21권1호
• /
• pp.455-456
• /
• 2009

최근 국내에서 내진성능평가를 위한 실험 시 구조물의 크기, 실험장비의 성능 등 여러 가지 제약 여건을 극복하고자 축소모형을 통하여 유사동적실험과 진동대실험을 수행하고 있지만 상사법칙에 관한 연구는 미비한 실정이다. 이에 대해 경제성과 신뢰성을 갖는 적절한 상사법칙을 제안하고자 한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.1681-1682
• /
• 2008

본 논문은 원자력발전소에서 가장 엄격한 품질 및 성능요건을 만족해야하는 안전등급(Q) 비상전원 공급용 디젤발전기의 여자시스템을 개발하고, 발전소에 적용하기 전에 축약발전기를 대상으로 여자시스템의 성능시험의 내용과 시험의 결과를 바탕으로 개발시스템의 성능과 건전성을 확인한 내용들을 기술하였다.

• Geomechanics and Engineering
• /
• 제30권1호
• /
• pp.45-49
• /
• 2022

In the present study, a physical model was built for the Jintan underground gas storage cavern group according to the similarity theory. In this regard, four ellipsoid caverns were built with scaled in-situ stresses and internal pressure. Then the stability of underground caverns was analyzed. The obtained results demonstrate that loss of internal pressure adversely affects the safety of caverns and attention should be paid during the operation of gas storage.

• KIEE International Transactions on Electrophysics and Applications
• /
• 제4C권5호
• /
• pp.247-251
• /
• 2004

We report highly improved yield strength of nickel thin film, prepared using electroplating. The micro-scaled nickel cantilever is found to have significantly higher yield strength than bulk nickel. For the yield strength test, the heights of the micro-scaled cantilever were varied up to 60 ${\mu}{\textrm}{m}$ and electrostatic force was used for actuation. Stress of the bent cantilever was estimated using the FEM large deflection model. The yield strength of the thin nickel film is found to be over five times higher than that of the bulk nickel previously published. Results from this study indicate that metal microstructures can be used for MEMS applications requiring large deflection.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.1418_1419
• /
• 2009

This paper presents the transient impedance when high current impulse up to 5 kA is applied to a scaled grounding grid in test field. For a realistic analysis of transient impedance on the high current impulse in the ground systems, grounding electrode installed outdoors and impulse current generator was used. The results were discussed based on its voltage and current trace, impulse impedance and V-I curve.

• 제어로봇시스템학회논문지
• /
• 제16권4호
• /
• pp.339-345
• /
• 2010

This paper introduces GP(Genetic Programming) based robust corner detectors for scaled and rotated images. Various empirical algorithms have been studied to improve computational speed and accuracy including approaches, such as the Harris and SUSAN, FAST corner detectors. These techniques are highly efficient for well-defined corners, but are limited to corner-like edges which are often generated in rotated images. It is very difficult to detect correctly edges which have characteristics similar to corners. In this paper, we have focused the above challenging problem and proposed Genetic Programming-based automated generation of corner detectors which is robust to scaled and rotated images. The proposed method is compared to the existing corner detectors on test images and shows superior results.

• 설비공학논문집
• /
• 제9권3호
• /
• pp.401-409
• /
• 1997

The long term drag reduction characteristics of Habon-G solution were investigated in the KIER pilot-scaled district heating simulation system. Test runs were implemented for 30 days without interruption. Pressure drop, flow rate and power consumption of surfactant (Habon-G) solution were regularly observed and compared with those of plain water. The experimental results suggest that the surfactant can be effectively applied to the DH transmission system for considerably long period wthout significant loss of its drag reduction capability even though the concentration of the additive may gradually decrease in the first stage of the experiment because of absorption.

• 항공우주기술
• /
• 제6권2호
• /
• pp.1-7
• /
• 2007

40% 축소형 스마트 무인기의 자율비행을 위한 자세 및 자세각속도 제어기를 설계하였다. 19개 설계점에서 축약된 시스템 운동방정식을 유도하였다. 운동방정식으로부터 설계요구 조건인 시간 응답을 만족 할 수 있는 제어기 이득을 해석적인 방법으로 선정하였다. 각 설계 점마다 구동기 및 통신 시간 지연을 고려한 안정도 여유를 구하였다 또한, 슬라이딩 모드 제어이론을 적용한 강건 제어기를 설계하여 선형 제어기와 성능 비교를 하였다. 설계된 제어기를 비선형 모델에 적용한 응답 결과로부터 제어 로직의 성능 및 적용 가능성을 평가하였다.