• Journal of the Korean GEO-environmental Society
• /
• v.8 no.5
• /
• pp.5-14
• /
• 2007

The quantity of noxious wastes generated by the growth in industrialization and population in all over the world and its potential hazards in subsurface environments are becoming increasingly significant. The extraction of the contaminant from the soil and movement of the water are restricted due to the low permeability and adsorption characteristics of the reclaimed soils. Incorporated technique with PVDs have been used for dewatering from fine-grained soils for the purpose of ground improvement by means of soil flushing and soil vapor extraction systems. This paper is to evaluate several key parameters that affected to the performance of the PVDs specifically with regard to: well resistance of PVD, zone of influence, and smear effects. In the feasibility of contaminant remediation was evaluated in pilot-scale laboratory experiments. Well resistance is affected on the vertical discharge capacity of the PVDs under the various vacuum pressures. The discharge capacity increases consistently in areal extents with higher applied vacuum up to a limiting vacuum pressure. The head values for each piezometer at different vacuum pressures show that the largest head loss occurs within 14 cm of the PVD. Air flow rates and head losses were measured for the PVD placed in the model test box and the gas permeability of the silty soils was calculated. Increasing the equivalent diameter results in a decrease in the calculated gas permeability. It is concluded that the gas permeability determined over the 1,500 to 2,000 $cm^3/s$ flow rates are the most accurate values which yields gas permeability of about 3.152 Darcy.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.36 no.6
• /
• pp.1011-1021
• /
• 2016

This study performs the potential flood hazard analysis by applying elevation data, soil data and land use data. The susceptibility maps linked to elevation, soil and land use are combined to develop the new types of flood hazard map such as runoff production map and runoff accumulation map. For the development of the runoff production map, land use, soil thickness, permeability, soil erosion and slope data are used as runoff indices. For the runoff accumulation map, elevation, knick point and lowland analysis data are used. To derive an integrated type of flood potential hazard, a TOPSIS (The Technique for Order of Preference by Similarity to Ideal Solution) technique, which is widely applied in MCDM (Multi-Criteria Decision Making) process, is adopted. The indices applied to the runoff production and accumulation maps are considered as criteria, and the cells of analysis area are considered as alternatives for TOPSIS technique. The model is applied to Gamcheon watershed to evaluate the flood potential hazards. Validation with large scale data shows the good agreements between historical data and runoff accumulation data. The analysis procedure presented in this study will contribute to make preliminary flood hazard map for the public information and for finding flood mitigation measures in the watershed.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.2
• /
• pp.187-194
• /
• 2012

The strength of particle-reinforced metal matrix composites is, in general, known to be increased by the geometrically necessary dislocations punched around a particle that form during cooling after consolidation because of coefficient of thermal expansion (CTE) mismatch between the particle and the matrix. An additional strength increase may also be observed, since another type of geometrically necessary dislocation can be formed during extensive deformation as a result of the strain gradient plasticity due to the elastic-plastic mismatch between the particle and the matrix. In this paper, the magnitudes of these two types of dislocations are calculated based on the dislocation plasticity. The dislocations are then converted to the respective strengths and allocated hierarchically to the matrix around the particle in the axisymmetric finite-element unit cell model. The proposed method is shown to be very effective by performing finite-element strength analysis of $SiC_p$/Al2124-T4 composites that included ductile failure in the matrix and particlematrix decohesion. The predicted results for different particle sizes and volume fractions show that the length scale effect of the particle size obviously affects the strength and failure behavior of the particle-reinforced metal matrix composites.

• Geomechanics and Engineering
• /
• v.14 no.1
• /
• pp.99-105
• /
• 2018

Soils are generally classified as fine-grained or coarse-grained depending on the percentage content of the primary constituents. In reality, soils are actually made up of mixed and composite constituents. Soils primarily classified as fine-grained, still consists of a range of coarse particles as secondary constituents in between 0% to 50%. A laboratory scale model test was conducted to investigate the influence of coarse particles on the physical (e.g., density, water content, and void ratio) and mechanical (e.g., quick undrained shear strength) properties of primarily classified fine-grained cohesive soils. Pure kaolinite clay and sand-mixed kaolinite soil (e.g., sand content: 10%, 20%, and 30%) having various water contents (60%, 65%, and 70%) were preconsolidated at different stress levels (0, 13, 17.5, 22 kPa). The quick undrained shear strength properties were determined using the conventional Static Cone Penetration Test (SCPT) method and the new Fall Cone Test (FCT) method. The corresponding void ratios and densities with respect to the quick undrained shear strength were also observed. Correlations of the physical properties and quick undrained shear strengths derived from the SCPT and FCT were also established. Comparison of results showed a significant relationship between the two methods. From the results of FCT and SCPT, there is a decreasing trend of quick undrained shear strength, strength increase ratio ($S_u/P_o$), and void ratio (e) as the sand content is increased. The quick undrained shear strength generally decreases with increased water content. For the same water content, increasing the sand content resulted to a decrease in quick undrained shear strength due to reduced adhesion, and also, resulted to an increase in density. Similarly, it is observed that the change in density is distinctively noticeable at sand content greater than 20%. However, for sand content lower than 10%, there is minimal change in density with respect to water content. In general, the results showed a decrease in quick undrained shear strength for soils with higher amounts of sand content. Therefore, as the soil adhesion is reduced, the cone penetration resistances of the FCT and SCPT reflects internal friction and density of sand in the total shear strength.

• The Journal of the Korea Contents Association
• /
• v.13 no.1
• /
• pp.115-126
• /
• 2013

The purpose of this study is to understand the utility of election campaign advertising by applying Q methodology that draw upon schematic model in subjectivity study. A survey was carried out among college students to classify the 16 selected Q-statements into a normal distribution using a 7 point scale. The collected data was analyzed using QUANL program, and principal component analysis using varimax rotation was used to identify the types of perceived utility of election campaign advertising. Type I can be categorized by a strong concern for the advertising technique improvement, Type II can be categorized by advocating for interest induction and Type III can be categorized by the truth inducement. The use of Q methodology provides insights into audience perceptions on the utility of election campaign advertising that would not be available through traditional methodologies and offers a foundation for audience involvement to address and overcome concerns about the utility of advertising for election campaign.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.10
• /
• pp.48-54
• /
• 2020

DMSMS (Diminishing Manufacturing Sources and Material Shortage) is increased by developing the scientific technique and downsizing the military part market. DMSMS affects the increase in total life cycle costs and serviceability. Therefore, advance control for parts is important to reduce the cost, and a database is needed to share information on the DMSMS. A task needs to be performed continuously by setting the major control item to management more efficiently. The purpose of this study was to deduce the major control item for the DMSMS management system. Thus, the pre-control item basis of the DAPA (Defense Acquisition Program Administration) Manual and the SD-22 Manual were first selected, and the results of the survey were analyzed by AHP (Analytic Hierarchy Process) method. Fifteen of the detailed items were stratified into three criteria (Impact, Probability, and cost of the DMSMS), and each weight for the items was calculated using a nine-point scale survey. The AHP survey was executed with 25 specialists in the DMSMS management field, and the score of consistency ratio over 0.1 was excluded. The model explained the results and suggested future directions for development.

• Journal of Korean Neurosurgical Society
• /
• v.54 no.5
• /
• pp.399-404
• /
• 2013

Objective : The authors conducted a retrospective cohort study to determine prognostic factors and treatment outcomes of brain metastases (BM) from breast cancer (BC) after Gamma Knife radiosurgery (GKS). Methods : Pathologic and clinical features, and outcomes were analyzed in a cohort of 62 patients with BM from BC treated by GKS. The Kaplan- Meier method, the log-rank test, and Cox's proportional hazards model were used to assess prognostic factors. Results : Median survival after GKS was 73.0 weeks (95% confidence interval, 46.0-100.1). HER2+ [hazard ratio (HR) 0.441; p=0.045], Karnofsky performance scale (KPS) ${\geq}70$ (RR 0.416; p=0.050) and systemic chemotherapy after GKS (RR 0.282; p=0.001) were found to be a favorable prognostic factor of overall survival. Actuarial local control (LC) rate were $89.5{\pm}4.5%$ and $70.5{\pm}6.9%$ at 6 and 12 months after GKS, respectively. No prognostic factors were found to affect LC rate. Uni- and multivariate analysis revealed that the distant control (DC) rate was higher in patients with; a small number (${\leq}3$) of metastasis (HR 0.300; p=0.045), no known extracranial metastasis (p=0.013, log-rank test), or the HER2+ subtype (HR 0.267; p=0.027). Additional whole brain radiation therapy and metastasis volume were not found to be significantly associated with LC, DC, or overall survival. Conclusion : The treatment outcomes of patients with newly diagnosed BM from BC treated with GKS could be affected primarily by intrinsic subtype, KPS, and systemic chemotherapy. Therapeutic strategy and prognosis scoring system should be individualized based on considerations of intrinsic subtype in addition to traditionally known parameters related to stereotactic radiosurgery.

• Journal of Korean Library and Information Science Society
• /
• v.51 no.1
• /
• pp.201-225
• /
• 2020

In order to respond to changes in college's educational goals and talents, university libraries need to be transformed into spaces that support creative and collaborative learning. Apart from overseas cases, it is necessary to discuss the development of creative and collaborative learning spaces appropriate to the situation of Korean university libraries. This purpose of this study is to provide an effective guide to university libraries planning to develop creative and cooperative learning spaces. To this end, this study conducted a literature review to define the concept of a creative and collaborative learning space in a university library, collected and analyzed cases of creative and collaborative learning space of Korean university libraries, and proposed a model for developing creative and collaborative learning space for university library. Case collection was carried out through field visits to 12 university libraries. In addition, in-depth interviews were conducted with the staffs in charge of the construction and operation of five university libraries selected in consideration of the operating entity, region, and scale. This study is meaningful in that it intensively researched and analyzed the advanced cases of creative and collaborative learning spaces in Korea to derive suggestions that can be used in the field of domestic university libraries.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.35 no.6
• /
• pp.84-96
• /
• 2008

This research investigated the landscape characteristics of the skyline and the cognitive characteristics of Mt. Mudeung (1,186m) from various viewpoints. Mt. Mudeung, the representative landscape of Gwangju City, has been recognized as a natural landmark and theme of paintings. By analyzing the perspective from 32 points with a digital terrain model, some landscape indices of the skyline were derived and the relationships are discussed. Assessment of the semantic differential scale with 21 adjective variables and representativeness to 15 landscape photographs of the mountain were accomplished. 1. Through regression analysis of the skyline indices, significant relationships were found between them the angle from the visual axis and number of skyline jumps, the vertical angle fluctuation and number of jumps per degree, the visual depth fluctuation and vertical angle fluctuation of skyline, and between the vertical angle mean and number of jumps per degree. Meaningful relations were found between the number of jumps of skyline to number of jumps per degree and the angle from visual axis to visual distance. However, in the representative assessment no difference was found on the angle from visual axis of viewpoints. On the other hand, it seemed to relate representativeness with visual clarity based on visual distance. 2. We found 4 factors "familiarity", "fluctuation of skylines", "openness", and "feeling of texture" in the results of factor analysis of semantic differential assessment. When considering the results of assessment for representativeness, adjective words for familiarity and openness seemed to have a close assessment. Specifically, the research showed that the landscape representation was highly assessed in a view which could be seen from the higher parts to the lower part of hills. This result indicates that the management of viewpoints which could get a scene from intermediate to distant, and locating a high elevation is important. 3. In the picturesque expression of Mt. Mudeung, various impressions from the different points, a skyline based on the top of Mt. Mudeung and a mono structure by overlapping hills were common characteristics. These common characteristics were also partially found through the analysis of topographical landscape indices and landscape images. Therefore, the viewpoints for the representative landscape management should be selected in natural or open spaces.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.9
• /
• pp.1241-1248
• /
• 2010

In large-scale production of hydrogen, a PHE (Process Heat Exchanger) is a key component because the heat required to carry out the Sulfur-Iodine chemical reaction that yields hydrogen is transferred from a VHTR (Very High Temperature Reactor) by the PHE. Korea Atomic Energy Research Institute established a helium gas loop for conducting performance test of components that are used in the VHTR. In this study, as a part of high-temperature structural-integrity evaluation of a designed PHE prototype that is scheduled to be tested in the helium gas loop, we carried out high-temperature structural-analysis modeling, thermal analysis, and thermal-expansion analysis for the designed PHE prototype. An appropriate constraint condition is proposed at the end of the in-flow and out-flow pipelines of the primary and secondary coolants and the proposed constraint condition will be applied to the design of the performance-test loop setup for the designed PHE prototype.