• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.8
• /
• pp.1755-1764
• /
• 1997

In this paper, we proposed the mechanism for the buffer allocation and a cell scheduling method with logical separation a single buffer in the ATm switch, and analyzed the cell loss probability and the delay of each trafic (CBR/VBR/ABR) based on the weighted value and the dynamic cell service scheduling algorithm. The proposed switch buffering system classifies composite trafics incoming to the switch, according to the characteristic of traffic, then stores them in the logically separated buffers, and adopts the round-robin service with weighted value in order to transmit cells in buffers though one output port. We analyzed 4 cell service scheduling algorithms with dynamic round-robinfor each logically separated service line of a single buffer, in which buffers have the respective weighted values and 3 classes on mixed traffic which characteristized by traffic descriptor. In simulation, using SIMCRIPT II.5., we model the VBR and the ABR traffics as ON/OFF processes, and the CBR traffic as a Poisson processes. As the results of analysis according to the proposed buffer management mechanism and cell service algorithm, we have found that the required QoS of each VC can be quaranteed depends on a scale of weighted values allocated to buffers that changed the weighted values, and cell scheduling algorithm.

• Environmental Engineering Research
• /
• v.17 no.4
• /
• pp.185-190
• /
• 2012

Rejection characteristics of perchlorate ($ClO_4^-$) were examined for commercially available reverse osmosis (RO) and nanofiltration (NF) membranes. A bench-scale dead-end stirred-cell filtration system was employed to determine the toxic ion rejection and the membrane flux. Model water solutions were used to prepare $ClO_4^-$ solutions (approximately, $1,000{\mu}g/L$) in the presence of background salts (NaCl, $Na_2SO_4$, and $CaCl_2$) at various pH values (3.5, 7, and 9.5) and solution ionic strengths (0.001, 0.01, and 0.01 M NaCl) in the presence of natural organic matter (NOM). Rejection by the membranes increased with increasing solution pH owing to increasingly negative membrane charge. In addition, the rejection of the target ion by the membranes increased with increasing solution ionic strength. The rejection of $ClO_4^-$ was consistently higher for the RO membrane than for the NF membrane and $ClO_4^-$ rejection followed the order $CaCl_2$ < NaCl < $Na_2SO_4$ at conditions of constant pH and ionic strength for both the RO and NF membranes. The possible influence of NOM on $ClO_4^-$ rejection by the membranes was also explored.

• Journal of Korean society of Dental Hygiene
• /
• v.18 no.4
• /
• pp.501-513
• /
• 2018

Objectives: The purpose of this study was to investigate the perception of workplace bullying in the dental hygienists to use them as basic data for improving the organizational relationship of the dental hygienists. Methods: The subjects were 302 dental hygienists that had been working at the dental clinics and dental hospitals. These data were analyzed by SPSS Version 20.0 (IBM Co., Armonk, NY, USA). Factor analysis was used for exploratory and confirmatory data. Independent t-test and one-way ANOVA were used to find out mean differences for verbal violence, improper business, and improper work environment according to characteristics of subjects. Results: Upon the study results, there were statistically significant differences between the verbal violence and working patterns according to the mean differences of the subfactors on subject's characteristics. Also, there were statistically significant differences between the improper work environment and all of subject's characteristics. However, there was no statistically significant differences in the improper business. The factor analysis showed that the Workplace Bullying of the dental hygienists was composed of three elements, namely 'verbal violence', 'improper business,' and 'improper work environment.' The validity of the model examined by a confirmatory factor analysis satisfied most of the relevant requirements. The Cronbach's aplha shows a good reliability. Conclusions: In conclusion, it was proven that dental hygienist's Workplace Bullying measurement tool had high validity and reliability. Furthermore, this study can be used to improve dental hygienists' organizational relationship. Therefore, by identifying the recognition of the dental hygienists, this study can contribute to affect a positive influence in the dental hospitals.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.37 no.11
• /
• pp.1121-1130
• /
• 2009

In order to investigate the offshore wind resources, the measured data from the QuikSCAT satellite was analyzed from Jan 2000 to Dec 2008. QuikSCAT satellite is a specialized device for a microwave scatterometer that measures near-surface wind speed and direction under all weather and cloud conditions. Wind speed measured at 10 m above from the sea surface was extrapolated to the hub height by using the power law model. It has been found that the high wind energy prevailing in the south sea and the east sea of the Korean peninsula. From the limitation of seawater depth for piling the tower and archipelagic environment around the south sea, the west and the south-west sea are favorable to construct the large scale offshore wind farm, but it needs efficient blade considering relatively low wind speed. Wind map and monthly variation of wind speed and wind rose using wind energy density were investigated at the specified positions.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.4 no.3
• /
• pp.133-140
• /
• 2002

Site-specific minimum temperature forecasts are critical in a short-term decision making procedure for preventive measures as well as a long-term strategy such as site selection in fruits industry. Nocturnal cold air pools frequently termed in mountainous areas under anticyclonic systems are very dangerous to the flowering buds in spring over Korea, but the spatial resolution to detect them exceeds the current weather forecast scale. To supplement the insufficient spatial resolution of official forecasts, we developed a GIS - assisted frost risk assesment scheme for using in mountainous areas. Daily minimum temperature data were obtained from 6 sites located in a 2.1 by 2.1 km area with complex topography near the southern edge of Sobaek mountains during radiative cooling nights in spring 2001. A digital elevation model with a 10 m spatial resolution was prepared for the entire study area and the cold air inflow was simulated for each grid cell by counting the number of surrounding cells coming into the processing cell. Primitive temperature surfaces were prepared for the corresponding dates by interpolating the Korea Meteorological Administration's automated observational data with the lapse rate correction. The cell temperature values corresponding to the 6 observation sites were extracted from the primitive temperature surface, and subtracted from the observed values to obtain the estimation error. The errors were regressed to the flow accumulation at the corresponding cells, delineating a statistically significant relationship. When we applied this relationship to the primitive temperature surfaces of frost nights during April 2002, there was a good agreement with the observations, showing a feasibility of site-specific frost warning system development in mountainous areas.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.27 no.5
• /
• pp.1077-1086
• /
• 2017

Malware mutants based on existing malware is widely used because it can easily avoid the existing security system even with a slight pattern change. These malware appear on average more than 1.6 million times a day, and they are gradually expanding to IoT / ICS as well as cyber space, which has a large scale of damage. In this paper, we propose an analytical method based on features of PE Section and DLL that do not give much significance, rather than pattern-based analysis, Sandbox-based analysis, and CFG, Strings-based analysis. It is expected that the proposed model will be able to cope with effective malicious code in case of combined operation of various existing analysis technologies.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.6
• /
• pp.4137-4146
• /
• 2015

The scale and required functionality of modern systems have increased and become more complicated. To successfully carry out the systems development projects, appropriate systems engineering (SE) and project management (PM) activities are required for the underlying process. In a system development organization, it is an effort to secure the SE & PM capability by adopting the CMMI is an evaluation model of improvement and ability of SE&PM process. To achieve the goal each organization establishes and uses its own organizational standard process, which satisfies the business characteristics. However, in practice, due to the lack of sufficient understanding on the interrelationship among different CMMI process areas, there still exist some difficulties with constructing organization processes. In systems development, the activities of SE are closely related with those of PM. Thus, the processes of SE and PM need to be fully integrated and explicitly linked to each other in order to complete the projects successfully. In this paper, we propose a SE&PM integration process architecture of organization that can be utilized in the system development organization is referenced in the construction of CMMI-based organizational process.

• Restorative Dentistry and Endodontics
• /
• v.19 no.1
• /
• pp.159-168
• /
• 1994

The purpose of this study was to evaluate the shear bond strength of the porcelain laminate specimens according to the surface roughness of the cut enamel of human anterior teeth. Flat enamel surfaces were prepared in 30 extracted human anterior teeth with diamond disc which were divided into two groups. Group 1 Coarse enamel surface group prepared with LVS-3 bur. Group 2 Fine enamel surface group prepared with superfine diamond bur. 30 teeth specimens of two group were stored in normal saline during 24 hours. 30 disk - type porcelain laminate specimens with diameter 4mm and thickness 1mm were made and sand - blasted on internal surface which were to cemented on enamel surface. Porcelain laminate specimens were cemented on enamel surface with Choice Veneer System (Bisco Dental, U.S.A) according to manufacture's instructions. All teeth specimens of two groups were manipulated with same method and stored In normal saline before testing. An Universal Testing machine (Model No.UTM-4206,Instron, U.S.A) was used to apply shear loads in the vertical directed, and the force required for separation was recorded with a cross head speed of 3mm/min and 500kg in full scale. The results were as follow ; 1. The mean shear bond strength of coarse surface group was 36.30kg and that of fine surface group was 44.39 kg, but there was no significant difference in breaking strength of two groups(p>0.05).

• Restorative Dentistry and Endodontics
• /
• v.18 no.1
• /
• pp.103-113
• /
• 1993

The purpose of this study was to evaluate the tensile bond strength of composite resin inlays according to the their internal surface treatment and types of luting cement and compared them with the conventional direct resin filling thchnique. Class II cavities were prepared in 50 extracted human molar teeth, and then equally divided into five groups. Group 1 : Cavities of control group were directly filled with P-50. Group 2 : Cavities of resin inlay group were luted with resin cement. Group 3 : Cavities of resin inlay group were luted with luting G-I cement. Group 4 : Cavities of resin inlay group were luted with resin cement after sandblasting. Group 5 : Cavities of resin inlay group were luted with luting G-I cement after sandblasting. All specimens were polished with same method and stored in normal saline for 24 hours before testing. An Universal Testing machine(Model No. AGS-100A, Shimadzu, Japan) was used to apply tensile loads in the vertical direction, and the force required for separation was recorded with a cross-head speed of 5mm/min and 100kg in full scale. The results were as follows : 1. The mean tensile bond strength was lowest in group luted with luting G-I cement, with measurements of $14.45{\pm}0.78(kg/cm^2)$ and highest in group luted with resin cement after sandblasting, with measurements of $49.6{\pm}2.74(kg/cm^2)$. 2. The tensile bond strength was greater in resin inlay groups luted with resin cement than in control group and resin inlay groups luted with luting G-I cement(P<0.05). 3. The tensile bond strength was lower in resin inlay groups luted with luting G-I cement than in control group(P<0.05). 4. The tensile bond strength was greater in resin inlay groups luted with resin cement or luting G-I cement after sandblasting than without that(P<0.05).

• The KIPS Transactions:PartA
• /
• v.9A no.4
• /
• pp.413-420
• /
• 2002

It it essential to get the exact location information of products for a warehouse management. It is very hard, however, to know the location of products which change their location in warehouse frequently This causes the effective warehouse management to be almost impossible. In this paper, we suggest a new location management system for such a SKU(Stock Keeping Unit) with high mobility. The system is composed of RFID (Radio Frequency IDentification), a management terminal with wireless LAN, mobile devices (Cellular Phone & PDA), and a central management system. As a model of a SKU with high mobility, we selected a used-car stored in a large-scale warehouse. We designed and implanted used-car location management system. After analyzing the operations of each position in used-car warehouse where the system will run, we implemented each function. This research shows that an embedded system with wireless LAN is able to know the status of coming in and cut and location of a SKU with high mobility in warehouse very accurately in real time. Therefore, it makes the warehouse to be controlled systematically.