• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.34 no.2
• /
• pp.142-147
• /
• 2021

We present a subthreshold swing model for a symmetric junctionless double gate MOSFET. The scale length λ1 required to obtain the potential distribution using the Poisson's equation is a criterion for analyzing the short channel effect by an analytical model. In general, if the channel length Lg satisfies Lg > 1.5λ1, it is known that the analytical model can be sufficiently used to analyze short channel effects. The scale length varies depending on the channel and oxide thickness as well as the dielectric constant of the channel and the oxide film. In this paper, we obtain the scale length for a constant permittivity (silicon and silicon dioxide), and derive the relationship between the scale length and the channel length satisfying the error range within 5%, compared with a numerical method. As a result, when the thickness of the oxide film is reduced to 1 nm, even in the case of Lg < λ1, the analytical subthreshold swing model proposed in this paper is observed to satisfy the error range of 5%. However, if the oxide thickness is increased to 3 nm and the channel thickness decreased to 6 nm, the analytical model can be used only for the channel length of Lg > 1.8λ1.

• Journal of the Society of Naval Architects of Korea
• /
• v.58 no.6
• /
• pp.415-423
• /
• 2021

There have been many experimental studies on the manoeuvrability of KRISO Container Ship (KCS). However, the scale ratio of the model ship and the test procedure for each institute are slightly different, so direct comparison for the data is technically difficult to perform. This paper presents the manoeuvrability of the ship with different scale ratios: 1/65.8, 1/42.0, and 1/31.6 in model scale. KRISO conducted Free Running Model Tests (FRMT): 35° turning circle tests and 20/20(10/10) zigzag manoeuvring tests. The test results indicated that advance and tactical diameter in turning circle tests were similar, and overshoot angles in two zigzag manoeuvring tests increased as the model ship size increased. In addition, a basic concept for the FRMT method with an auxiliary X-thrust device was proposed so that the scale effect could be considered in model ship tests.

• The Journal of Fisheries Business Administration
• /
• v.51 no.3
• /
• pp.17-31
• /
• 2020

The purpose of this study is to identify economic situation on scale of tuna distant longline fishery by analyzing its economies of scale using the cost function. To analyze its economics of scale, the deep-sea fishing statistics were used from 2012 to 2016. In detail, the number of panels for estimating the cost function was 68 tuna distant longline vessels from 2012 to 2016, and the total number of observations over the five years were 340. As a final model, the two-way fixed effect model based on the translog cost function was adopted through the F test, the Breusch-Pagan test and the Hausman test. As a result of the analysis, it was found that tuna distant longline fishery between 2012 and 2014 was diseconomies of scale, the fishery between 2015 and 2016 was economies of scale. However, the economic indicators of the scale from 2012 to 2016 were almost close to zero, indicating that the constant returns to scale, the optimal scale, were reached. Therefore, in the situation where the amount of fishery resources in the world continues to decrease, it is necessary to prepare a method to obtain economic benefits through scale maintenance and reduction rather than indiscriminate scale expansion.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.32-35
• /
• 1996

In this paper, it is shown that the dominant errors of baro-altimeters can be characterized by bias and scale factor errors. Also an optimal filter for estimating both bias and scale factor is derived based on the concept of model transition. The optimal filter is, however, not realizable because the model transition hypotheses increase exponentially. Therefore a realizable suboptimal filter using the interacting multiple model(IMM) technique is proposed. Computer simulation results show that the estimation errors of the proposed filter are smaller than those of the conventional least squares algorithm with a forgetting factor when both the bias and the scale factor are varying.

• Journal of Distribution Science
• /
• v.11 no.12
• /
• pp.5-11
• /
• 2013

Purpose - The purpose of this study was to construct a turnover estimation model by investigating research by Park et al. (2006) on the market area of domestic distribution. The study investigated distribution by using a new tool for the turnover estimation technique. This study developed and discussed the turnover estimation technique of Park et al. (2006), applying it to a large-scale retailer in "D"city that was suitable for on-the-spot distribution. It constructed the new model in accordance with test procedures keeping to this retail business location, to apply its procedures to a specific situation and improve the turn over estimation process. Further, it investigated the analysis and procedures of existing turnover estimation cases to provide problems and alternatives for turnover estimation for a large-scale retailer in "D"city. Finally, it also discussed problems and scope for further research. Research design, data, and methodology - This study was conducted on the basis of "virtue" studies. In other words, it took into account the special quality of the structure of Korea's trade zones. The researcher sought to verify a sale estimate model for use in a distribution industry's location. The main purpose was to enable the sale estimate model (that is, the individual model's presentation) to be practically used in real situations in Korea by supplementing processes and variables. Results - The sale estimate model is constructed, first, by conducting a data survey of the general trading area. Second, staying within the city's census of company operating areas, the city's total consumption expenditure is derived by applying the large-scale store index. Third, the probability of shopping is investigated. Fourth, the scale of sales is estimated using the process of singularity. The correct details need to be verified for the model construction and the new model will need to be a distinct sale estimate model, with this being a special quality for business conditions. This will need to be a subsequent research task. Conclusions - The study investigated, tested, and supplemented the turnover estimation model of Park et al. (2006) in a market area in South Korea. Supplementation of some procedures and variables could provide a turnover estimation model in South Korea that would be an independent model. The turnover estimation model is applied, first, by undertaking an investigation of the market area. Second, a census of the intercity market area is carried out to estimate the total consumption of the specific city. Consumption is estimated by applying indexes of large-scale retailers. Third, an investigation is undertaken on the probability of shopping. Fourth, the scale of turnover is estimated. Further studies should investigate each department as well as direct and indirect variables. The turnover estimation model should be tested to construct new models depending on the type of region and business. In-depth and careful discussion by researchers is also needed. An upgraded turnover estimation model could be developed for Korea's on-the-spot distribution.

• Journal of Korean Institute of Industrial Engineers
• /
• v.40 no.2
• /
• pp.163-171
• /
• 2014

Epidemic models are used to analyze the spreading of epidemic diseases, estimate public health needs, and assess the effectiveness of mitigation strategies. Modeling scope of an epidemic model ranges from the regional scale to national and global scale. Most of the epidemic models developed in Korea are at the national scale using the equation-based model. While these models are useful for designing and evaluating national public health policies, they do not provide sufficient details. As an alternative, individual-based models at the regional scale are often used to describe disease spreading, so that various mitigation strategies can be designed and tested. This paper presents an individual-based epidemic spreading model at regional scale. This model incorporates 2005 census data to build the synthetic population in the model representing Daejeon in 2005. The model's capability is demonstrated by an example where we assess the effectiveness of several mitigation strategies using the model.

• Wind and Structures
• /
• v.34 no.4
• /
• pp.355-369
• /
• 2022

Section model test, as the most commonly used method to evaluate the aerostatic and aeroelastic performances of long-span bridges, may be carried out under different conditions of incoming wind speed, geometric scale and wind tunnel facilities, which may lead to potential Reynolds number (Re) effect, model scaling effect and wind tunnel scale effect, respectively. The Re effect and scale effect on aerostatic force coefficients and aeroelastic characteristics of streamlined bridge decks were investigated via 1:100 and 1:60 scale section model tests. The influence of auxiliary facilities was further investigated by comparative tests between a bare deck section and the deck section with auxiliary facilities. The force measurement results over a Re region from about 1×10⁵ to 4×10⁵ indicate that the drag coefficients of both deck sections show obvious Re effect, while the pitching moment coefficients have weak Re dependence. The lift coefficients of the smaller scale models have more significant Re effect. Comparative tests of different scale models under the same Re number indicate that the static force coefficients have obvious scale effect, which is even more prominent than the Re effect. Additionally, the scale effect induced by lower model length to wind tunnel height ratio may produce static force coefficients with smaller absolute values, which may be less conservative for structural design. The results with respect to flutter stability indicate that the aerodynamic-damping-related flutter derivatives 𝘈^*₂ and 𝐴^*₁𝐻^*₃ have opposite scale effect, which makes the overall scale effect on critical flutter wind speed greatly weakened. The most significant scale effect on critical flutter wind speed occurs at +3° wind angle of attack, which makes the small-scale section models give conservative predictions.

• Journal of Korean Society for Atmospheric Environment
• /
• v.13 no.2
• /
• pp.137-145
• /
• 1997

To predict the effects of air pollutant in the coastal region, we have developed the air pollutant model, the reaction model and the deposition of NO, $NO_2, and O_3$. And the numerical model of air pollutant concentration employed the nested technique to calculate with the higher resolution for the area. The nested technique used two grid systems, one for the large scale calculating region with the coarse mesh grid (CMG) and the other for the small scale region with the fine grid (FMG). In other to prove the validity of the simulation model the calculations were conducted for the present situation. The results of them reasonably agree with the observed data and proved the validity of the model.

• Journal of Korea Multimedia Society
• /
• v.21 no.12
• /
• pp.1467-1472
• /
• 2018

For the problem that the face image of surveillance video cannot be accurately identified due to the low resolution, this paper proposes a low resolution face recognition solution based on convolutional neural network model. Convolutional Neural Networks (CNN) model for multi-scale input The CNN model for multi-scale input is an improvement over the existing "two-step method" in which low-resolution images are up-sampled using a simple bi-cubic interpolation method. Then, the up sampled image and the high-resolution image are mixed as a model training sample. The CNN model learns the common feature space of the high- and low-resolution images, and then measures the feature similarity through the cosine distance. Finally, the recognition result is given. The experiments on the CMU PIE and Extended Yale B datasets show that the accuracy of the model is better than other comparison methods. Compared with the CMDA_BGE algorithm with the highest recognition rate, the accuracy rate is 2.5%~9.9%.

• Journal of Ship and Ocean Technology
• /
• v.5 no.4
• /
• pp.44-50
• /
• 2001

Large container carriers are suffering from lack of knowledge on reliable correlation allowances between model tests and full-scale trials, especially at fully loaded condition, Careful full-scale sea trial with a full loading of containers both in holds and on decks was carried out to clarify it. Model test results were analyzed by different methods but with the same measuring data to figure out appropriated correlations factors for each analysis methods, Even if it is no doubt that model test technique is one of the most reliable tool to predict full scale powering performance, its assumptions and simplifications which have been applied on the course of data manipulation and analysis need a feedback from sea trial data for a fine tuning, so called correlation factor. It can be stated that the best correlation allowances at fully loaded condition for both 2-dimensional and 3-dimensional analysis methods are fecund through the careful sea trial results and relevant study on the large size container carriers.