• 의료ㆍ복지 건축 : 한국의료복지건축학회 논문집
• /
• 제14권1호
• /
• pp.7-20
• /
• 2008

This study is an analysis of the characteristics between the remodeling of an existing hospital and the remodeling of an existing hospital with the addition of a new annex. The comparison of the two remodeling methods focused on the difference of gross area, circulation system, improvement of hospital function, profitability of remodeling construction, and so on. The result of this study can be summed up as follows. The remodeling of an existing hospital with a new annex has the merit of enlarging new areas, promoting the function of the hospital, changing the inner circulation system, and facilitating the construction. However, it has the demerit of requiring too much money and expanded space for the construction. Therefore, it is possible to use the existing hospital remodeling method for small scale hospitals that do not have many patients, but it would be necessary for big scale hospitals with many patients to adopt the method of remodeling the existing hospital with the addition of an annex.

• Transactions on Electrical and Electronic Materials
• /
• 제17권2호
• /
• pp.92-97
• /
• 2016

This paper presents design and simulation of wide band RF microswitch that uses electrostatic actuation for its operation. RF MEMS devices exhibit superior high frequency performance in comparison to conventional devices. Similar techniques that are used in Very Large Scale Integration (VLSI) can be employed to design and fabricate MEMS devices and traditional batch-processing methods can be used for its manufacturing. The proposed switch presents a novel design approach to handle reliability concerns in MEMS switches like dielectric charging effect, micro welding and stiction. The shape has been optimized at actuation voltage of 14-16 V. The switch has an improved restoring force of 20.8 μN. The design of the proposed switch is very elemental and primarily composed of electrostatic actuator, a bridge membrane and coplanar waveguide which are suspended over the substrate. The simple design of the switch makes it easy for fabrication. Typical insertion and isolation of the switch at 1 GHz is -0.03 dB and -71 dB and at 85 GHz it is -0.24 dB and -29.8 dB respectively. The isolation remains more than - 20 db even after 120 GHz. To our knowledge this is the first demonstration of a metal contact switch that shows such a high and sustained isolation and performance at W-band frequencies with an excellent figure-of merit (fc=1/2.pi.Ron.Cu =1,900 GHz). This figure of merit is significantly greater than electronic switching devices. The switch would find extensive application in wideband operations and areas where reliability is a major concern.

• 에너지공학
• /
• 제7권1호
• /
• pp.57-64
• /
• 1998

폴리에스터와 스테인레스스틸섬유를 재료로 제조된 제전사여과포에 대한 물리화학적 특성시험 및 여과포성능 기초시험을 수행하였다. 실험용먼지로 제철.제강, 시멘트제조, 열공급시설 및 폐기물공정에서 채취된 먼지를 처리하여 사용하였다. 제전사여과포의 물리화학적 특성 실험에서는 산성분위기하에서 인장강도 및 초기탄성계수변화를 조사하였고, Automated Permporometer를 이용하여 평균흐름세공압력, 기포점 세공지름, 평균흐름세공지름 및 세공크기분포를 구하였다. 또한 벤처규모의 여과포 기초성능 시험장치를 이용하여 먼지부하에 따른 압력손실, 먼지통과율 및 여과포성능 평가지표를 산출하였다. 산성가스 및 분위기하에서 제전사여과포의 인장강도는 온도 및 노출시간과 깊은 관련이 있었다. 압력손실은 여과속도와 먼지부하가 증가함에 따라 증가하였으며 증가형태는 먼지의 종류에 따라 달랐다. 먼지 통과율은 먼지종류에 관계없이 먼지부하의 증가에 따라 급격히 감소하는 경향을 나타내었다. 여과포성능지표는 먼지 포집 초기에는 증가했다가 급격히 감소하여 일정하게 유지되었다.

• 한국국방경영분석학회지
• /
• 제8권1호
• /
• pp.53-70
• /
• 1982

This thesis develops a more realistic and applicable new set covering model that is adjusted and supplied by the existing set covering models, and induces an algorithm for solving the new set covering model, and applies the new model and the algorithm to an actual set covering problems. The new set covering model introduces a probabilistic covering aistance ($0{\eqslantless}p{\eqslantless}1$)or time($0{\eqslantless}p{\eqslantless}1$) instead of a deterministic covering distance(0 or 1) or time (0 or 1) of the existing set covering model. The existing set covering model has not considered the merit of the overcover of customers. But this new set covering model leads a concept of this overcover to a concept of the parallel system reliability. The algorithm has been programmed on the UNIVAC 9030 for solving large-scale covering problems. An application of the new set covering model is presented in order to determine the locations of the air surveillance radars as a set covering problem for a case-study.

• 한국산업안전학회:학술대회논문집
• /
• 한국안전학회 1998년도 춘계 학술논문발표회 논문집
• /
• pp.89-97
• /
• 1998

In this study, under large scale yielding conditions crack propagation is found to governed by parameters based on the J-integral or on the crack opening displacement. But initiation of crack propagation of ductile material seems to be controlled by just on parameter that is the strain. The relationship between the critical value of J-integral and the local fracture strain in uniaxial tensile test in the region of maximum reduction in area. Therefore, the fundamental theorectical equation by the proposed elastic-plastic fracture toughness and the local fracture strain has a merit. in comparison with the ASTM method, which can measure by using the load-displacement curve and the specimens in tenslie test.

• 한국안전학회지
• /
• 제13권4호
• /
• pp.25-33
• /
• 1998

In this study, under large scale yielding conditions crack propagation is found to governed by parameters based on the J-integral or on the crack opening displacement. But initiation of crack propagation of ductile material seems to be controlled by just on parameter that is the strain. The relationship between the critical value of J-integral and the local fracture strain in uniaxial tensile test in the region of maximum reduction in area. Therefore, the fundamental theoretical equation by the proposed elastic-plastic fracture toughness and the local fracture strain has a merit, in comparison with the ASTM method, which can measure by using the load-displacement curve and the specimens in tensile test.

• 설비공학논문집
• /
• 제20권9호
• /
• pp.631-636
• /
• 2008

Solar thermal systems are recently refocused by higher oil prices, but did not completely restore the people's confidence owing to the past bad systems. Several types of solar water heating systems were analyzed in characteristics and some proper systems were proposed under Korean climates and system scale. As a small system, natural circulation system should be installed only in a southern region of Korea, with a freeze protection valve instead of heating coil for freeze protection. In most area of Korea, the forced circulation type with a heat exchange coil inside a thermal storage tank or with a spiral-jacketed storage tank, proposed and verified by the authors, has a merit of stable performance and freeze protection.

• 한국항해항만학회지
• /
• 제29권4호
• /
• pp.335-339
• /
• 2005

The superconducting electromagnetic propulsion system has been proposed as one of new alternative propulsion systems. Especially, the helical-type propulsion system has the greatest merit that is able to use the solenoid-type superconducting magnets with high magnetic fields. In this study, calculations of characteristics of the large scale helical-type thruster are carried out on the basis of our experimental results. As a couple of results of calculations, it is found that the thruster efficiency quickly increases with the length of electrode up to about 5 m and then goes up to about 0.9. The thruster efficiency peaks at a certain point ($^{\sim}0.6\;m$) and then falls as length of pitch increases.

• 한국인터넷방송통신학회논문지
• /
• 제17권2호
• /
• pp.45-50
• /
• 2017

마이크로서비스 아키텍쳐(Microservice Architecture)는 실시간 실감 미디어 방송시스템과 같이 대규모 분산시스템에 적합한 서비스 아키텍쳐의 하나이다. 스케일-아웃(Scale-Out)기법 과 같은 수평적 성능 확장이 쉽기 때문에 최근 넷플릭스나 트위터와 같은 서비스 플랫폼 업체들이 앞다투어 이와 같은 시스템을 도입하고 있다. 또한 마이크로 서비스 아키텍쳐는 기존의 REST와 같은 웹 API에서 처리하기 어려운 영상처리나 실시간 데이터 분석 등을 비동기 기반의 프로세싱를 이용하여 처리 가능하게 하고 있다. 본 논문은 IoT 센서 데이터 분석이나 대용량 실감미디어를 실시간으로 편집하는 클라우드 기반 영상편집과 같은 다수의 이벤트들이 스트림으로 발생하며 플랫폼 내에서 비동기로 처리하는 상황에서 이벤트의 처리 순서가 보장되지 않음을 실험으로 증명하고 이에 알맞은 비동기 기반 마이크로서비스에 적용 가능한 이벤트 스트림 처리 프레임워크를 제안한다.

• 대한안전경영과학회지
• /
• 제17권2호
• /
• pp.55-66
• /
• 2015

In the perspective of industrial health management, it is important for the employee to decrease their job stress, to improve their productivity and quality of labor. In this study, the job stress, and it's influence on PWI(Psychosocial Wellbeing Index) were investigated by the questionnaire survey of 138 industrial workers who had studied assistive technology in college. The contents of questionnaire consist of the demographic characteristics, job-related characteristics, job stress and psycho-social stress. We evaluated job stress by KOSS-SF(Korean Occupational Stress Scale-Sort Form) and psychosocial stress by PWI-SF(Psychosocial Well-being Index-Short Form). To analyze the results, we evaluated the exposure level of KOSS and PWI by demographic characteristics and job-related characteristics using significance tests. Also, we estimated the relationship among demographic characteristics, job-related characteristics, job stress and psychosocial stress, using correlation analysis. As a results, all workers were found to be in a group under the high risky stress. It showed that the scale index of female's job non-autonomy and pwi were much larger than those of male's. Therefore, to guarantee job autonomy of female workers should be more emphasized, to improve their working environment. Job type had significant relationships with many job stress category; physical environment, job demand, job instability and organization culture. Regarding pwi, the scale index of the workers who is in charge of the civil service such as contacting the disabled and the aged in person, were much larger than that of the other workers. Accordingly, the job stress management program including physical environment, job demand, job instability and organization culture, should be suggested, to decrease the stress of the workers in charge of the disabled and the elders service. The strongest predictors of pwi was organization system through maximum positive relations between organization system and pwi. Therefore, it indicates that improvement of organization system such as a fair merit rating, a manpower supply, demand plan and department cooperation is urgently needed to reduce pwi.