• 한국표면공학회지
• /
• 제43권4호
• /
• pp.205-210
• /
• 2010

The A106 Gr B low carbon steel, which was used in the electric power plants and heavy chemical plants, was welded by multi-pass arc welding. The heat affected zone (HAZ) formed by welding was corroded in acid chloride solution, or in saturated $H_2S$ containing acid chloride solution, or in saturated $H_2S$ containing acid chloride solution under applied current. In this order of corrosion solution, the rate of corrosion increased, because $H_2S$ accelerated the iron dissolution, hydrogen evolution, and the formation of nonprotective FeS, whereas the applied current accelerated the electrochemical reaction. The scales formed in acid chloride solution consisted primarily of $Fe_3O_4$, while those formed in $H_2S$ containing acid chloride solution consisted primarily of $Fe_3O_4$ and FeS.

• 한국결정성장학회지
• /
• 제26권3호
• /
• pp.121-125
• /
• 2016

The effect of temperature and pressure in the nitrogen ambient furnace on bulk micro defect (BMD) and denuded zone (Dz) is experimentally investigated. It is found that as pressure increases, Dz depth increases with a small decrease of BMD density in the range of temperature, $100{\sim}300^{\circ}C$. BMD density with hot isostatic pressure treatment (HIP) at temperature of $850^{\circ}C$ is higher than that without HIP while Dz depth is lower due to much higher BMD density. As the pressure increases, BMD density is increased and saturated to a critical value, and Dz depth increases even if BMD density is saturated. The concentration of nitrogen increases near the surface with increasing pressure, and the peak of the concentration moves closer to the surface. The nitrogen is gathered near the surface, and does not become in-diffusion to the bulk of the wafer. The silicon nitride layer near the surface prevents to inject the additional nitrogen into the bulk of the wafer across the layer. The nitrogen does not affect the formation of BMD. On the other hand, the oxygen is moved into the bulk of the wafer by increasing pressure. Dz depth from the surface is extended into the bulk because the nuclei of BMD move into the bulk of the wafer.

• 대한기계학회논문집
• /
• 제13권4호
• /
• pp.618-624
• /
• 1989

본 연구의 목적은 낮은 포화 압력하에서의 초음파에 의한 미세포 포움 구조 획득의 가능성을 평가하기 위한 것으로, 이 초음파 가공을 고분자 포움의 연속적인 압출 가공에 적용하기 위한 기초 연구를 이론적 및 실험적으로 수행함에 있다.따라서 미세포구조의 획득이 본 연구의 목적은 아니며 초음파를 이용한 열가소성 수지내의 핵생성 거동에 대한 고찰을 하고자 한다.

• Bulletin of the Korean Chemical Society
• /
• 제10권4호
• /
• pp.360-362
• /
• 1989

Catalytic isomerization of unsaturated alcohols to the corresponding carbonyl compounds with$Rh(ClO_4)(CO)(PPh_3)_2\;(1)\;and\;[Rh(CO)(PPh_3)_3]ClO_4$ (2) is faster under hydrogen (where hydrogenation also occurs to give saturated alcohols) than under nitrogen. The isomerization under hydrogen seems to occur through an alkylhydridorhodium(III) complex which also undergoes reductive elimination to give hydrogenation products, saturated alcohols. The isomerization under hydrogen is faster with 2 than with 1, which is understood by acceleration of the last step, enol formation by $PPh_3$ dissociated from 2 and present in the reaction mixture when 2 is used as catalyst. Relative rates of the isomerization observed for different unsaturated alcohols are interpreted by steric effects of substituted groups and numbers of hydrogens to be abstracted by the rhodium of the intermediate, alkylhydridorhodium(III) to undergo the reductive elimination to give enol which is then rapidly converted into a carbonyl compound. It has been observed that the hydrogenation is relatively significant when reactions occur slowly whereas the isomerization is predominant when reactions proceed rapidly.

• 한국수자원학회논문집
• /
• 제31권4호
• /
• pp.363-373
• /
• 1998

본 논문에서는 다공성 매질의 투수계수장이 비정체형인 경우 대수투수계수 및 수두와 속도의 교차공분산을 통하여 불규칙한 유동장을 규명하였으며, 포화대수층 내의 속도 및 수도 분포는 유입이 없는 2차원, 정상 유동문제를 추계학적으로 해석하여 구하였다. 이들 교차공분산들은 준 해석적 형태로 나타낼 수 있으며 비정체형 투수장과 수두의 평균 기울기를 나타내는 매개변수들로 표현된다. 투수계수의 상관 함수가 가우스 분포를 가지고 그 경향이 평균 수두 기울기와 평행한 경우와 수직인 두 특수한 경우의 교차공분산을 평균 유동 방향과 같은 방향이거나 수직 방향에 관하여 해석하였다. 이 교차공분산들은 투수계수장이 비정체형인 경우에 물질 이동의 예측 및 현장에서 측정시 conditioning에 유효하게 쓰일 수 있고 비정체형 수치해석 프로그램의 검증에도 활용할 수 있다.

• Corrosion Science and Technology
• /
• 제6권5호
• /
• pp.227-232
• /
• 2007

The corrosion behavior of carbon steel (N80) in carbon dioxide saturated 1%NaCl solution with and without acetic acid or acetate was investigated by weight-loss test, electrochemical methods (polarization curve, Electrochemical impedance spectroscopy). The major objective is to make clear that the effect of acetic acid and acetate on the corrosion of carbon steel in $Co_2$ environments. The results indicate that either acetic acid or acetate accelerates cathodic reducing reaction, facilitates dissolution of corrosion products on carbon steel, and so promotes the corrosion rate of carbon steel in carbon dioxide saturated NaCl solution. All Nyquist Plots are consisting of a capacitive loop in high frequency region, an inductive loop in medial frequency region and a capacitive arc in low frequency region. The high frequency capacitive loop, medial frequency inductive loop and low frequency capacitive arc are corresponding to the electron transfer reaction, the formation/adsorption of intermediates and dissolution of corrosion products respectively. All arc of the measured impedance reduced with the increase of the concentration of Ac-, especially HAc. However, the same phenomenon is not notable after reducing pH value by adding HCl. HAc is a stronger proton donor and can be reduced directly by electrochemical reaction firstly. Ac- can't participate in electrochemistry reaction directly, but $Ac^-$ an hydrate easily to create HAc in carbon dioxide saturated environments. HAc is as catalyst in $Co_2$ corrosion. As a result, the corrosion rate was accelerated in the presence of acetate ion even pH value of solution increased.

• 한국지반공학회논문집
• /
• 제34권8호
• /
• pp.27-36
• /
• 2018

연속적인 입자 유실에 의해 발생하는 지반 함몰 유형은 지반의 포화상태 및 상대밀도에 따라 전개 거동이 다르게 발생한다. 본 연구에서는 지반의 포화상태에 따라 함몰 유형을 분류하고 각 유형에 대해 상대밀도에 따른 해석을 개별요소법을 통해 수행하여 영향 인자에 따른 지반 함몰 전개 거동 변화를 분석하였다. 조밀한 지반인 경우, 포화상태에서는 비교적 작은 침하량과 침하 영향범위가 발생하였고 부분포화상태에서는 지반 내부에 동공을 형성하는 결과를 보였다. 반면, 느슨한 지반인 경우, 포화상태에서는 침하량과 침하 영향범위가 크게 발생하였으며 부분포화상태에서도 동공을 형성하지 못하고 즉각적인 함몰이 발생하였다. 결과적으로 지반의 상대밀도 및 포화상태는 입자 사이에 작용하는 맞물림 효과에 큰 영향을 미치며 함몰 거동을 변화시키는 중요한 인자로 작용하는 것으로 나타났다.

• 한국환경농학회:학술대회논문집
• /
• 한국환경농학회 2011년도 30주년 정기총회 및 국제심포지엄
• /
• pp.207-222
• /
• 2011

Relationships between soil saturated hydraulic conductivity ($K_s$) and porosity (${\phi}$) have been developed over many years; however, use of these relationships for evaluating rain-induced seals is limited mainly because of difficulties in estimating seal pore-size characteristics. The objectives of this study were to evaluate the $K_s$ of soil surface seals over a range of thicknesses, where seal thickness was determined using a High-Resolution-Computed-Tomography (HRCT) scanner, and to investigate relationships between $K_s$ and ${\phi}$ of developing seals in samples with equivalent diameters (e.d.) ${\geq}15\;{\mu}m$. A Mexico silt loam soil was packed to a bulk density (${\rho}_b$) of $1.1\;Mg\;m^{-3}$ in cylinders 160-mm i.d. by 160-mm long and subjected to $61-mm\;h^{-1}$ simulated rainfall having a kinetic energy (KE) of $25\;J\;m^{-2}\;min^{-1}$ for 7.5, 15, 30, and 60 min to create a range in seal development. Thicknesses of the seal layers were determined by analysis of HRCT images of seals. The $K_s$ values of the seals were estimated using an effective $K_s$ value ($K_{s-eff}$). The $K_s-{\phi}$ relationship was described by a Kozeny and Carmen equation, $K_s=B{\phi}^n$; where B and n are empirical constants and n = 31. This approach explained 86% of the variation between $K_s$ and ${\phi}$ within the soil seals. Knowledge of surface seal information and hydraulic conductivity can provide useful information to use in management of sites prone to sealing formation.

• 미생물학회지
• /
• 제6권4호
• /
• pp.113-121
• /
• 1968

This study has been aimed to determine the ecological factors with relationship to the Jongkok production in view of fermentation technology by means of some strains, Asp. kawachii, which is now preserved by the author and the following factors are included during the study; inorganic salts, nitrogen, sugar, water contents and temperature. The results, are as follows: (a) Sugar among other above-mentioned factors is increasingly affecting the number of the short type of conidiophore on culture medium and the conidiophore is increased by direct ratio until glucose concentration of 50%, at which concentration is mostly effective for the short type of conidiophore, while other factors did not affect on it. (b) Until glucose concentration of 50% sugar component of culture medium is favorable for the spore formation of Asp. kawachii by direct ratio. And peptone or asparagine on nitrogen medium, calcium-phosphate among other inorganic salts, wheat bran and rice branare also favorable, but other factors rientioned earlier show no relationship with the spore formation. Sugar, however, also related with the spore color clearness of crimson and light brown, and spore color is mostly clear at the point of glucose concentration until 50%. And asparagine on nitrogen medium, calcium phosphate among other inorganic salts, rice bran did all affect on the color clearness, while other factors did not concern with color clearness. (c) Water, sugar and temperature have related with the acid formation which is promoted, by direct ratio at the point of water-saturated condition and glucose concentration of 50%, while temperature at $25^{\circ}C$favorably affected on the acid formation which is increased by inverse ratio at the temperature$25^{\circ}C$ to $45^{\circ}C$ And pH did not relate with the acid formation. (d) Cylindrical plate method devised by the author is mostly favorable for the preservation and isolation of culture, compared with the traditional slant medium method.

• 한국결정성장학회지
• /
• 제11권5호
• /
• pp.190-196
• /
• 2001

명반석$[K_2SO_4$.$Al_2(SO_4)_3$.$4Al(OH)_3$]을 공기분위기에서 가열하면 500~$580^{\circ}C$에서 탈수되고, 580~$780^{\circ}C$에서 $SO_3$(g)가 발생되므로 석회석과 혼합소성하였을 때의 무수석고($CaSO_4$)의 합성특성을 조사하였다. 명반석의 열분해는 $CO_2$(g) 분압에 영향이 없으나, 석회석의 경우 공기 분위기에서는 약 $650^{\circ}C$부터 분해되지만 $CO_2$(g)의 포화 분위기에서는 약 $900^{\circ}C$부터 분해된다. 명반석과 석회석을 1:6의 몰비로 혼합한 후 공기 분위기와 $CO_2$(g) 포화분위기에서 $10^{\circ}C$/min의 속도로 $1000^{\circ}C$까지 가열하여 2시간 동안 소성하면 $550^{\circ}C$에서 무수석고가, $700^{\circ}C$에서 calciumlangbeinite($(2CaSO_4$.$K_2SO_4$)가, 800~$950^{\circ}C$에서 ha yne이 형성되며 이때 무수석고의 합성량은 각각 99.0%와 95.0% 정도였다. 공기 분위기에서 무수석고 합성량은 석회석의 입도(0.5mm 이하)에 관계없이 거의 일정하지만, $CO_2$(g)의 포화분위기에서는 석회석의 입도가 작아짐에 따라 증가된다. 그러므로 명반석과 석회석을 1:6의 몰비로 혼합 소성하면 1 몰의 ha yne과 1 몰의 calciumlangbeinite로 구성된 클링커가 합성가능하다.