• Journal of Photoscience
• /
• v.4 no.1
• /
• pp.17-21
• /
• 1997

The photochemical reactions of the neat chloroform and the aqueous chloroform in the absence (saturated with argon) and presence of 02 (saturated with air or oxygen) have been investigated using 184.9 nm UV light. The irradiation of the deoxygenated neat chloroform causes the formation of hexachloroethane, pentachloroethane, and 1, 1, 2, 2-tetrachloroethane. The initial quantum yields of the products were determined to be 6.37 x 10$^{-4}$, 4.04 x 10$^{-4}$ and 1.76 x 10$^{-4}$, respectively. In the irradiation of aqueous chloroform, chloride ion was also formed along with the products listed above and 1, 1, 2, 2-tetrachloroethane was the predominant product among the chlorinated organic products, which contrasts to the case of the neat chloroform. The presence of oxygen during the irradiation of aqueous chloroform had an effect on the yield of the products. With increasing the concentration of oxygen, the formation of the products was decreased. Probable reaction mechanisms for the photochemical reaction were presented on the basis of products analysis.

• Geomechanics and Engineering
• /
• v.3 no.2
• /
• pp.131-151
• /
• 2011

The electrical conductivity of a soil-water system is related to its engineering properties. By measuring the soil electrical conductivity, one may obtain quantitative, semi-quantitative, or qualitative information to estimate the in-situ soil behavior for site characterization. This paper presents the results of electrical conductivity measured on compacted kaolin clay samples using a circular two-electrode cell in conjunction with a specially designed compaction apparatus, which has the advantage of reducing errors due to sample handling and increasing measurement accuracy. The experimental results are analyzed to observe the effects of various parameters on soil electrical conductivity, i.e. porosity, unit weight, water content and pore water salinity. The performance of existing analytical models for predicting the electrical conductivity of saturated and unsaturated soils is evaluated by calculating empirical constants in these models. It is found that the Rhoades model gives the best fit for the kaolin clay investigated. Two general relationships between the formation factor and soil porosity are established based on the experimental data reported in the literature and measured from this study for saturated soils, which may provide insight for understanding electrical conduction characteristics of soils over a wide range of porosity.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1325-1326
• /
• 2007

We have demonstrated new functionalities of Ag doped chalcogenide glasses based on their capabilities as solid electrolytes. Formation of such amorphous systems by the introduction of silver via photo-induced diffusion in thin chalcogenide films is considered. The influence of silver on the properties of the newly formed materials is regarded in terms of diffusion kinetics and Ag saturation is related to the composition of the hosting material. Silver saturated is related to the composition of the hosting material. Silver saturated Ge-Ch glasses have been used in the formation of solid electrolyte which is the active medium in programmable metallization cell (PMC) devices. This paper concerns our more recent work on silver-doped germanium selenide electrolytes and describes the electrical characteristics of PMC devices made from these materials following annealing at $300^{\circ}C$.

• Applied Chemistry for Engineering
• /
• v.8 no.1
• /
• pp.67-75
• /
• 1997

Heterogeneous cation exchange membrane consisting of cation exchange resin particles (diameter of less than $149{\mu}$) which are finely dispersed in a polyethylene matrix, were produced as forms of sheet. The characteristics were measured after treating hot water or saturated sodium chloride. When membranes were treated with hot water or saturated sodium chloride, cation exchange resin particles swell and expand pushing away the polyethylene matrix of membranes. The above treatment results the formation of narrow cavities between a cation exchange resin particles and polyethylene matrix, and the formation of fine micro-cracks on the polyethylene matrix. Thus, we were obtained good physical and electrochemical properties. On the treatment with hot water or saturated sodium chloride, the optimum conditions for good heterogeneous cation exchange membrane were treatment time of 30min and treatment temperature of $90^{\circ}C$.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.23 no.1
• /
• pp.170-179
• /
• 1994

Atherosclerosis, a multifactorial disease, is closely related to lipid nutrition , Data from well known epidemiological studies including Seven Country , Framinghsam Study and several intervention trials have confirmed that serum cholesterol is the major risk factor and elevation of LDL-cholesterol level is most undesriable. On the basis of results concurring in that dietary saturated fat and cholesterol increase serum cholesterol while polyunsaturated fat decrease it, changes in serum choesterol level have been predicted by regression equations developed by Keys et al. and other investigators. Effects of individual fatty acids on the level of serum cholesterol have been further differentiated by chain length, cis-trans isomers and n-6 vs n-3 polyunsaturated fatty acids. Among them the effect of n-3 fatty acids has been well recogniaed as antiplatelet activity, thus reducing the incidence of atherosclerosis. Role of vitamin E in prevention of atherosclerosis has been evovled from works showing that LDL oxdiation stimulates formation of ateroma and also from epidemiologic studies. Dietary recommendations at present are : (ⅰ) 30 and 10 cal % as upper limit of total and saturated fat intakes, respectively (ⅱ) no more than 300 mg cholesterol/day, (ⅲ) 1-2 g of n-3 fatty acid/day and (ⅳ) some increase RDA of vitamin E which is 8-10 TE.

• Coupled systems mechanics
• /
• v.9 no.2
• /
• pp.125-145
• /
• 2020

In this paper, we present a 3D thermo-hydro-mechanical coupled discrete beam lattice model of structure built of the nonisothermal saturated poro-plastic medium subjected to mechanical loads and nonstationary heat transfer conditions. The proposed model is based on Voronoi cell representation of the domain with cohesive links represented as inelastic Timoshenko beam finite elements enhanced with additional kinematics in terms of embedded strong discontinuities in axial and both transverse directions. The enhanced Timoshenko beam finite element is capable of modeling crack formation in mode I, mode II and mode III. Mode I relates to crack opening, mode II relates to in-plane crack sliding, and mode III relates to the out-of-plane shear sliding. The pore fluid flow and heat flow in the proposed model are governed by Darcy's law and Fourier's law for heat conduction, respectively. The pore pressure field and temperature field are approximated with linear tetrahedral finite elements. By exploiting nodal point quadrature rule for numerical integration on tetrahedral finite elements and duality property between Voronoi diagram and Delaunay tetrahedralization, the numerical implementation of the coupling results with additional pore pressure and temperature degrees of freedom placed at each node of a Timoshenko beam finite element. The results of several numerical simulations are presented and discussed.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.248-248
• /
• 2010

We have demonstrated new functionalities of Ag-doped chalcogenide glasses based on their capabilities as solid electrolytes. The influence of silver on the properties of the newly formed materials is regarded in terms of diffusion kinetics, and Ag saturation is related to the composition of the hosting material. Silver saturated in chalcogenide glass has been used in the formation of solid electrolyte, which is the active medium in the programmable metallization cell (PMC) device. In this paper, we investigated the optical properties of Ag-doped chalcogenide thin film by He-Ne laser beam exposure, which is concerned with the Ag-doping effect of PMCs before or after annealing. Chalcogenide bulk glass was fabricated by a conventional melt quenching technique. Amorphous chalcogenide and Ag thin films were prepared by e-beam evaporation at a deposition rate of about $4\;{\AA}/sec$. As a result of resistance change with laser beam exposure, the resistance abruptly dropped from the initial value of $1.4\;M{\Omega}$ to the saturated value of $400\;{\Omega}$.

• Nuclear Engineering and Technology
• /
• v.55 no.10
• /
• pp.3665-3676
• /
• 2023

The use of ion exchange resins to remove ionic impurities from solution is prevalent in industrial process systems, including in the primary heat transport system (PHTS) purification circuit of nuclear power plants. Despite its extensive use in the nuclear industry, our general understanding of ion exchange cannot fully explain the complex chemistry in ion exchange beds, particularly when operated at or near their saturation limit. This work investigates the behaviour of mixed-bed ion exchange resin, saturated with species representative of corrosion products in a CANDU (Canadian Deuterium Uranium) reactor PHTS, particularly with respect to iron chemistry in the resin bed and the removal of lithium ions from solution. Experiments were performed under deaerated conditions, analogous to normal PHTS operation. The results show interesting iron chemistry, suggesting the hydrolysis of cation resin bound ferrous species and the subsequent formation of either a solid hydrolysis product or the soluble, anionic Fe(OH)₃^-.

• The Korean Journal of Mycology
• /
• v.17 no.4
• /
• pp.194-196
• /
• 1989

Effects of temperature and aeration on the formation of non-basidiocarpous basidiospores of Ganoderma lucidum were examined. The spores were produced most early and abundantly at $30^{\circ}C$ on PDA. No spores were formed at 15 and $35^{\circ}C$. For the formation of the spores, aeration was essential. The spores were rarely produced under the condition of saturated humidity.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.27 no.8
• /
• pp.1023-1032
• /
• 2003

The effect of local forcing on the separated flow over a backward-facing step is investigated through hot-wire measurements and flow visualization with multi-smoke wires. The boundary layer upstream of the separation point is laminar and the Reynolds number based on the free stream velocity and the step height is 13800. The local forcing is given from a slit located at the step edge and the forcing signal is always defined when the wind tunnel is in operation. In case of single frequency forcing, the streamwise velocity and the reattachment length are measured under forcing with various forcing frequencies. For the range of 0.010〈S $t_{\theta}$〈0.013, the forcing frequency component of the streamwise velocity fluctuation grows exponentially and is saturated at x/h = 0.75 , while its subharmonic component grows following the fundamental and is saturated at x/h = 2.0. However, the saturated value of the subharmonic is much lower than that of the fundamental. It is observed that the vortex formation is inhibited by the forcing at S $t_{\theta}$ = 0.019 . For double frequency forcing, natural instability frequency is adopted as a fundamental frequency and its subharmonic is superposed on it. The fundamental frequency component of the streamwise velocity grows exponentially and is saturated at 0.5 < x/ｈ < 0.75, while its subharmonic component grows following the fundamental and is saturated at x/ｈ= 1.5 . Furthermore, the saturated value of the subharmonic component is much higher than that for the single frequency forcing and is nearly the same or higher than that of the fundamental. It is observed that the subharmonic component does not grow for the narrow range of the initial phase difference. This means that there is a range of the initial phase difference where the vortex parring cannot be enhanced or amplified by double frequency forcing. In addition, this effect of the initial phase difference on the development of the shear layer and the distribution of the reattachment length shows a similar trend. From these observations, it can be inferred that the development of the shear layer and the reattachment length are closely related to the vortex paring.