• Journal of Advanced Navigation Technology
• /
• v.24 no.3
• /
• pp.238-244
• /
• 2020

The development and distribution rate of smartphones have progressed so rapidly that it is safe for the entire nation to use them in the smart age, and the use of smartphones has become an essential medium for the use of domestic media content, and many people are using various contents regardless of gender, age, or region. Recently, various media outlets have been consuming video content for online learning, indicating that learners utilize video content online for learning. In the previous research, satisfaction studies were conducted according to the type of content, and the improvement plan was necessary because no research was conducted on how to evaluate the learning content itself and provide it to learners. In this paper, we would like to propose a system through evaluation and review of learning content itself as a way to improve the way of providing video content for learning and quality learning content.

• The Journal of the Korean dental association
• /
• v.56 no.1
• /
• pp.42-48
• /
• 2018

INTRODUCTION The most commonly impacted tooth is the third molar. An impacted third molar can ultimately cause acute pain, infection, tumors, cysts, caries, periodontal disease, and loss of adjacent teeth. Local anesthesia is employed for removing the third molar. This study aimed to evaluate the efficacy and safety of 2% lidocaine with 1:80,000 or 1:200,000 epinephrine for surgical extraction of bilateral impacted mandibular third molars. METHODS Sixty-five healthy participants underwent surgical extraction of bilateral impacted mandibular third molars in two separate visits while under local anesthesia with 2% lidocaine with different epinephrine concentration (1:80,000 or 1:200,000) in a double-blind, randomized, crossover trial. Visual analogue scale pain scores obtained immediately after surgical extraction were primarily evaluated for the two groups receiving different epinephrine concentrations. Visual analogue scale pain scores obtained 2, 4, and 6 h after administering an anesthetic, onset and duration of analgesia, onset of pain, intraoperative bleeding, operator's and participant's overall satisfaction, drug dosage, and hemodynamic parameters were evaluated for the two groups. RESULTS There were no statistically significant differences between the two groups in any measurements except hemodynamic factors (P > .05). Changes in systolic blood pressure and heart rate following anesthetic administration were significantly greater in the group receiving 1:80,000 epinephrine than in that receiving 1:200,000 epinephrine ($P{\leq}01$). CONCLUSION The difference in epinephrine concentration between 1:80,000 and 1:200,000 in 2% lidocaine liquid does not affect the medical efficacy of the anesthetic. Furthermore, 2% lidocaine with 1:200,000 epinephrine has better safety with regard to hemodynamic parameters than 2% lidocaine with 1:80,000 epinephrine. Therefore, we suggest using 2% lidocaine with 1:200,000 epinephrine rather than 2% lidocaine with 1:80,000 epinephrine for surgical extraction of impacted mandibular third molars in hemodynamically unstable patients.

• Convergence Security Journal
• /
• v.14 no.6_1
• /
• pp.65-73
• /
• 2014

For many years, there have been many researches and guidelines to improve the employment rate of discharged soldiers. However, there have not been enough effective analysis conducted about the outplacement service and improvement guidelines. That is the reason why the satisfaction level of governmental supporting programs for the discharged soldiers stays at low level. Therefore, a methodical approach is needed for the discharged soldiers who have dedicated their services for many years for the sake of the country's security. For this reason, tools which can support build an effective outplacement service for the discharged soldiers are required. In this study, psychological, structural and environmental aspect of discharged soldiers were surveyed at the cognitive level based on the soldiers waiting for the discharge from military service. As a result, it became clear that psychological advice or support and job training for the discharged soldiers who executed long-term service are urgent. In addition, an efficient system can control and maintain the system mentioned above.

• The Journal of Fisheries Business Administration
• /
• v.22 no.2
• /
• pp.19-51
• /
• 1991

The objectives of the study are to look into the fisheries processing industry, analyze problems the industry has, and develop strategies for the industry to take care of the problems. The study was performed in two different dimensions : industry level and firm level. Nevertheless, the study focused on the following main problem areas raw material, production, technology development, internationalization, and managerial performance. The secondary data were utilized to analyze problems at the industry level, For analyzing the firm level situation, an empirical study by using a mail survey with a questionnaire was accomplished. The main problems found were as follows : First, difficulty in procuring raw material was the most serious and main problem. It was caused, externally, by the announcement of 200 nautical miles by most of fishery abundant countries and, internally, by drying fishery resources in the nation's coastal areas ; Second, the rate of fishery processing has been continuously increased and the degree of the processing has also been sophisticated, which implies the pattern of demand for the fishery has been changing widely and deeply. The industry, however, seemed to be unable to meet the consumers' satisfaction ; Third, with the importance of technology for ensuring the changing demands in the fishery processing industry, there has been little effort in research and development both at industry level and at the firm level ; Next, the industry has mainly involved in exporting in association with internationalization. Not to mention about foreign direct investment, technology transfer was not active ; Finaliy, most of firms were densely located in a few areas. The managerical performance in terms of main financial ratios still needs to be improved. Thus, strategies, which would take care of the repective problems, were developed. At industry level, the strategies were developed by reasoning mostly based on the findings from the literature survey. A scheme for internationalization of the firms was suggested. This was made by extracting the factors which would differentiate the firms' internationalization stages. In order to achieve this analysis, discriminant approach was employed. Despite the utility of the findings, it was mostly emphasized that harmonious efforts among government, the industry supporting institutions such as banks, and firms are needed for the successful operation of the strategies. Also, a list of areas for further study was provided especially in relation to the validity threatening parts of the study.

• The Journal of the Korea Contents Association
• /
• v.9 no.12
• /
• pp.477-484
• /
• 2009

It is important for the strategy of service to provide the weather information in the environment that the smart clothing has been changed focusing on the consumer center. Recently, the various applications of smart clothing concept have been presented by researchers and developers. Among them, the smart clothing based on the sensors is most likely to gain the highest demand rate in the market. In this paper, we proposed the life weather index monitoring system using the wearable based smart cap. By wearing the proposed smart cap, the weather status is gathered and its signals are transmitted to the connected UMPC. It can be easily monitored in real time. To provide the life weather index according to the sensors, the weather index was analyzed in terms of 6 factors, such as, the heat index, the food poisoning index, the discomfort index, the ultraviolet index, the water pipe freeze possibility index, and the windchill temperature index. Ultimately, this paper suggests empirical application to verify the adequacy and the validity with the life weather index monitoring system. Accordingly, the satisfaction and the quality of services will be improved the smart clothing.

• International Journal of Quality Innovation
• /
• v.9 no.3
• /
• pp.71-91
• /
• 2008

The definition of cycle time is the time from the wafer start to the wafer output. It usually takes one or two months to get the product since customer decides to produce it. The cycle time is a critical factor for customer satisfaction because it represents the response time to the market. Long cycle time reflects the ineffective investment for the capital. The cycle time is very important for foundry because long cycle time will cause customer unsatisfied and the order loss. Consequently, all of the foundries put lots of human source in the cycle time improvement. Usually, we make decisions based on the experience in the cycle time management. We have no mechanism or theory for cycle time management. We do work-in-process (WIP) management based on turn rate and standard WIP (STD WIP) set by experiences. But the experience didn't mean the optimal solution, when the situation changed, the cycle time or the standard WIP will also be changed. The experience will not always be applicable. If we only have the experience and no mechanism, management will not be work out. After interview several foundry fab managers, all of the fab can't reflect the situation. That is, all of them will have an impact period after product mix or utilization varied. In this study, we want to develop a formula for standard WIP and use statistical process control (SPC) concept to set WIP upper/lower limit level. When WIP exceed the limit level, it will trigger action plans to compensate WIP Profile. If WIP Profile balances, we don't need too much WIP. So WIP level could be reduced and cycle time also could be reduced.

• Journal of Korean Foot and Ankle Society
• /
• v.8 no.1
• /
• pp.31-38
• /
• 2004

Purpose: The purpose of the study was to identify the subtypes of idiopathic osteoarthritis of the tarsometatarsal joints based on accompanying hindfoot, midfoot, or foot deformities and their corresponding surgical options and also to evaluate the overall clinical results. Materials and Methods: The study included 59 patients (67 feet) with idiopathic tarsometatarsal joint osteoarthritis. Tarsometatarsal fusion was performed for tarsometatarsal joint and accompanied secondary change was divided into subtypes and various bony reconstruction was carried out. The patients were evaluated with the AOFAS midfoot score and FFI. The average patient age was 60.2 years with 40.6 months follow-up. Fifty-four feet (80.6%) had been treated with realignment fusion. Twenty-six feet had first and second tarsometatarsal joint fusion, and 20 feet had first tarsometatarsal fusion only. Six subtypes were identified based on associated foot deformities: 1) in-situ without deformities (18%), 2) pes planovalgus (45%), 3) rockerbottom (15%), 4) cavus foot (1%), 5) hallux valgus (12%), and 6) hallux valgus with pes planovalgus or rockerbottom (9%). Plantar-medial closing-wedge resection was used in 10 feet to correct rockerbottom. For pes planovalgus, a medial sliding calcaneal osteotomy was done. Lateral column lengthening with medial sliding calcaneal osteotomy was done for severe pes planovalgus, and triple arthrodesis was done for rigid pes planovalgus. Hallux valgus was corrected with the Lapidus procedure (85.7%). Results: AOFAS midfoot scores improved from preoperative 34.1 points to postoperative 83.9 points (p<0.05). The Foot Function Index postoperatively also showed significant improvement (p<0.05), with a high satisfaction rate (86.6%). There were 29 complications, most commonly sesamoid pain. Conclusion: Idiopathic tarsometatarsal OA feet can be classified into six categories. Pes planovalgus feet should be treated with medial sliding calcaneal osteotomy, lateral column lengthening, or triple arthrodesis in addition to tarsometatarsal joint realignment fusion. Rockerbottom and hallux valgus deformities should also be addressed.

• Journal of Digital Convergence
• /
• v.13 no.4
• /
• pp.341-348
• /
• 2015

As a result of growth of digital music market in Korea, Creator's rights and interests have been at the heart of the debate in terms of legal system. In the music industry, digital music revenue has now overtaken records sales and compared to download service it is now clear that music streaming and subscription is mainstream model in the rise of the worldwide market of digital music. This trend is also indentical to the domestic and withholding regulations for music service and creator's rights and interests have become an ever growing issue. Ministry of Culture, Sports ad Tourism decided the revision of withholding regulations for the digital music service in 2013. The amendment is to change its policy of charging music service from the flat rate pricing to a usage-based system. This paper brought forward some disputable points such as fair division of profit, reasonable pricing for consumers etc. about the revision. Therefore, improvement of system and change in the perception of such copyrights are still required for both the encouragement of creator's activities and the high consumer satisfaction.

• Korea Journal of Hospital Management
• /
• v.21 no.1
• /
• pp.32-42
• /
• 2016

This study is conducted to estimate economic ripple effects of subsidiary services of hospitals. Using the Input/Output Analysis, this study analyzes production inducement effect, added value inducement effect, and labor inducement effect. Also, it assesses potential economic effects of the subsidiary services of which the scope is expanded as the government's proposed in 2014. Data regarding hospital subsidiary services and economic effects are obtained from the hospitals' financial statements on the National Tax Services and the Bank of Korea. The major results of this study are summarized as follows; subsidiary service profits of hospitals are 466 billion won and rent profits of hospitals are 152 billion won. Of these, the rate of subsidiary service profits in tertiary hospitals is about 66% of total subsidiary service profits. Producement inducement effect of subsidiary services of hospitals is higher than that of total industry, service industry and medical service industry. Added value inducement effect of subsidiary services of hospitals is higher than that of total industry, manufacturing industry, service industry and medical service industry. Job position inducement effect of subsidiary service in hospitals is higher than that of total industry, service industry and medical service industry. Also, employment inducement effect of subsidiary service in hospitals is higher than that of total industry and medical service industry. The results may suggest that subsidiary services revenue in medical institutions contribute to improving operating profits. Facing with intense market competition and pressures to control health care costs, hospitals may need to determine whether subsidiary services help boost their profitability and improve customer satisfaction.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.30 no.9_10 s.157
• /
• pp.1344-1353
• /
• 2006

The purpose of this research is to investigate the actual wearing conditions of working uniform and identify problems for the aircraft mechanic. For this study, questionnaire surveys were conducted dividing according to styles of clothing; one-piece and two-piece styles. Subjects were 343 men working in flight line. Questionnaire of 159 two-piece styles and 184 one-piece ones were used in analysis. The results of the study are as follows; The result about wearing each type of working uniform showed that the two-piece one is always as the air force uniform, whereas the one-piece one is worn only a few times. They felt inconvenience during all operations except in the sitting position, crawling position, and positions in which they were using tools. Accordingly, the result of the functionality reported dissatisfaction on all question items. Therefore, uniform of two-piece style achieved better results on all questions related to motional flexibility and functionality. Questions on changes to finishing methods showed that each airline employed different methods for both two-pieced and one-pieced uniforms. The answers about the unstitched or worn-out parts of the two-piece garments showed that pants were unstitched on the inner seam of the trouser leg and hip regions, but the upper one was not. In case of the one-pieced uniform, the parts of wearing out is the seam of hip and the unstitched parts are knee region and hem line of pants. Questions concerning their satisfaction with the material of uniforms indicated a high rate of dissatisfaction, particularly in its ventilation and absorbency. Questions concerning the preferred design of working uniform indicated a preference for two-piece uniform rather than one-piece ones.