• Journal of Aerospace System Engineering
• /
• v.12 no.6
• /
• pp.9-16
• /
• 2018

This paper describes how to find out the optimum position of the reaction wheel assembly (RWA) to minimize image quality degradation through the integrated system jitter prediction combining the micro-vibration test with finite element analysis considering optical coefficients. Micro-vibration generated from RWA that is widely used for satellite maneuver, is one of key factors that degrades the quality of satellite image. Due to varying vibration characteristics of each RWA, its accommodation position may affect image quality even though the same company manufactured them. To resolve this issue, an integrated system jitter prediction is conducted with all possible RWA accommodation location, and finally we determine optimal RWA position from the analysis results.

• Journal of Astronomy and Space Sciences
• /
• v.41 no.1
• /
• pp.43-60
• /
• 2024

Korea Pathfinder Lunar Orbiter (KPLO) is South Korea's first space exploration mission, developed by the Korea Aerospace Research Institute. It aims to develop technologies for lunar exploration, explore lunar science, and test new technologies. KPLO was launched on August 5, 2022, by a Falcon-9 launch vehicle from cape canaveral space force station (CCSFS) in the United States and placed on a ballistic lunar transfer (BLT) trajectory. A total of four trajectory correction maneuvers were performed during the approximately 4.5-month trans-lunar cruise phase to reach the Moon. Starting with the first lunar orbit insertion (LOI) maneuver on December 16, the spacecraft performed a total of three maneuvers before arriving at the lunar mission orbit, at an altitude of 100 kilometers, on December 27, 2022. After entering lunar orbit, the commissioning phase validated the operation of the mission mode, in which the payload is oriented toward the center of the Moon. After completing about one month of commissioning, normal mission operations began, and each payload successfully performed its planned mission. All of the spacecraft operations that KPLO performs from launch to normal operations were designed through the system operations design process. This includes operations that are automatically initiated post-separation from the launch vehicle, as well as those in lunar transfer orbit and lunar mission orbit. Key operational procedures such as the spacecraft's initial checkout, trajectory correction maneuvers, LOI, and commissioning were developed during the early operation preparation phase. These procedures were executed effectively during both the early and normal operation phases. The successful execution of these operations confirms the robust verification of the system operation.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.5
• /
• pp.56-64
• /
• 2006

Station collocation of closely placed multiple GEO spacecraft is required to avoid the problem of collision risk, attitude sensor interference and/or occultation. This paper presents the method of obtaining the orbit correction scheme for collocating two GEO spacecraft within a small station-keeping box. The relative motion of each spacecraft with respect to the virtual geostationary satellite is precisely expressed in terms of power and trigonometry functions. This closed-form orbit propagator is used to define the constraint conditions which meet the requirements for the station collocation. Finally, the technique of constrained optimization is used to find the orbit maneuver sequence. Nonlinear simulations are performed and their results are compared with those of the classical method.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.11a
• /
• pp.769-771
• /
• 2011

The satellite payloaded on the 2nd stage of KSLV-I is planned to perform CCAM(Contamination and Collision Avoidance Maneuver) not to collide with KM(Kick Motor). At the moment, the satellite should pass through low density environment not to be contaminated by KM plume due to residual thrust. Therefore, it is necessary to predict the flow field of KM plume by residual thrust. In this paper, DSMC (Direct Simulation Monte-Carlo) method, which is widely accepted to simulate in rarefied regime, is used to compute the density field of KM plume by residual thrust and the result of DSMC simulation was compared with that of FLUENT to validate it.

• International Journal of Aeronautical and Space Sciences
• /
• v.8 no.1
• /
• pp.129-139
• /
• 2007

In this paper, attitude control laws for simultaneous pointing of multiple spacecrafts are considered under a formation flying scenario. The basic approach lies in adaptive feedback gains using relative attitude information or maneuver time approximation for coordinated attitude control. Each control law is targeted to balancing mean motion or to correcting system response to the slowest satellite. The control gain adaptation is constructed by two approaches. The first one is using variable damping gain to manipulate speed of a fast system response, and the second one uses alternate natural frequency of the system under control. The validity and stability of the proposed approaches are examined analytically and tested through numerical simulations.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.17 no.1
• /
• pp.1-8
• /
• 2009

In this paper, reorientation based on angular momentum exchange is applied for a bias momentum stabilized satellite, which is equipped with a spherical fuel tank, and the effect of liquid slosh on the attitude properties such as inertia tensor and angular rate is investigated. In order to represent the slosh motion of liquid an equivalent mechanical model is adopted and full nonlinear equations of motion for three-body system are derived. Computer simulations are performed for several cases, which use the viscosity of liquid and the center location of the tank as input parameters, mainly in order to observe how the viscosity of liquid and the center location of the tank influence the spacecraft’s attitude. The investigation includes observing time-variations of the inertia tensor, especially presence of components of product of inertia during the maneuver.

• Journal of Aerospace System Engineering
• /
• v.7 no.4
• /
• pp.12-17
• /
• 2013

Control Moment Gyroscope(CMG) is one of the most efficient momentum exchange devices for satellite attitude control and essential device for agile maneuver system. This paper presents the details of a designed Single Gimbal CMG with a constant speed momentum wheel and single axis attitude control unstable to stable. In order to keep the naturally unstable equivalent point, it should be controlling the gimbal constantly. The experimental data are compared with theoretical result and requirements are used to verify their performance specifications.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.37 no.1
• /
• pp.28-35
• /
• 2009

This paper derives the equation of coordinated attitude formulation taking into account the orbital dynamics of a target vehicle and the attitude of a tracking satellite in geostationary orbit. The coordinated attitude is always to communicate with the ground station during the target tracking. Because the tracking satellite could perform high angle maneuver, MRP parameters having no singular point are used. Also for the sequential tracking of several target vehicles, the equation automatically making a coordinated attitude is suggested. Coordinated attitude flying and sequential tracking are confirmed through simulations. In short, this paper shows that a satellite could track a target vehicle and communicate with ground station simultaneously using the derived equation of coordinated attitude even though without a accuracy sensor.

• Journal of Astronomy and Space Sciences
• /
• v.25 no.2
• /
• pp.167-180
• /
• 2008

The resolution of Earth images taken from a satellite has close relation with satellite's altitude. If a satellite has lower altitude, it gets a picture having better resolution. However the satellite will be exposed to heavier air drag and will spend more fuel to maintain its altitude for a desired mission. Therefore, in this study, the required fuel to maintain very low earth orbit(LEO) with severe air drag is analyzed using optimization method such as collocation method. The required fuel to maintain the low altitude has significantly increased as the mission altitude is lowered and the solar activity is maximized. This study also shows that the fuel reduced by increasing the period of the satellite maneuver is very small, and that slightly increasing the satellite's mission altitude is much effective in reducing the amount of fuel to maintain its altitude. The calculated fuel to maintain very low earth orbit in this study would give useful information in planning the budget of fuel and cost for LEO satellites.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.48 no.6
• /
• pp.455-466
• /
• 2020

In this study, we built a thermal model for SNIPE 6U nano-satellite which has scientific mission for measuring science data in near Earth space environment and described thermal design based on the thermal model. And the validity of the thermal design was verified through the on-orbit thermal analysis. The thermal design was carried out mainly on the passive thermal control techniques such as surface finishes, insulators, and thermal conductors in consideration of the characteristics of the nano-satellite. However, the components with narrow operating temperature range and directly exposed to the orbital thermal environments, such as a battery and thrusters, are accomodated with heaters to satisfy the temperature requirements. On-orbit thermal analysis conditions are based on the basic orbital conditions of the satellite, and thermal analysis was performed for Normal mode, Launch & Early Orbit Phase (LEOP), Safehold mode, and Maneuver mode which are classified by the power consumption and the attitude of the satellite according to the mission scenario. The analysis results for each mode confirmed that every component satisfies the temperature requirement. In addition, the heater capacity and duty cycle of the battery and thruster were calculated through the analysis results of the Safehold mode.