• Journal of the Optical Society of Korea
• /
• 제12권4호
• /
• pp.309-313
• /
• 2008

We studied the sapphire and germanium fibers to determine which optical fiber best transmits Erbium:YAG laser for intracorporeal lithotripsy. Human calculi were ablated with an Erbium:YAG laser in contact mode using two fibers. Optical outputs at the distal end of fibers were measured before and after laser lithotripsy. Upon the irradiation on the calculus with the 50 mJ and 100 mJ pulse energy, the output energy at the distal end of germanium fiber declined to approximately 50% of the input energy. For the sapphire fiber, the output energy at the distal end remained unchanged with 100 mJ input energy; however the output energy had dropped to 50% for 200 mJ input energy. In order to examine how the types of target tissue affect the fiber damage, the sapphire fiber was tested for the irradiation on soft tissue and water as well. No energy decline was observed during soft tissue and water irradiation. We also characterized ablation craters with both optical fibers. Both fibers produced similar craters on calculi in terms of depth and diameter. Sapphire fibers are better suited than germanium fibers for Erbium:YAG lithotripsy in terms of the fiber damage.

• 대한치과기공학회지
• /
• 제25권1호
• /
• pp.21-28
• /
• 2003

The purpose of this study was to process bio-active glass ceramic composite, reinforced with sapphire fibers, by hot press. Also to study the interface of the matrix and the sapphire fiber, and the mechanical properties. Glass raw materials melted in Pt crucible at 1300$^{\circ}C$ during 3.5 hours. The melt was crushed in ball mill and then crushed material, ground and sieved to $<40{\beta}{\mu}m$. Sapphire fibers cut (30mm) and aligned. Powder and fibers hot pressed. The micrographs show good bonding between the matrix and the fiber and no porosity in the glass matrix. This means ideal fracture phenomena. Glass is fractured before the fiber. This is indication of good fracture strength. EDXS showing aluminum rich phase and crystalline phase. Bright field image of the matrix showing crystalline phase. Also diffraction pattern of TEM showing the crystalline phase and more than one phase. Strength of the samples was determined by 3 point bend testing. Strength of the 10vol% sample was approximately 69MPa, while strength of the control sample is 35MPa. Conclusions through this study as follow: 1. Micrographs show no porosity in the glass matrix and the interface. 2. The interface between the fiber and the glass matrix show no gaps. 3. Fracture of the glass indicates characteristic fiber-matrix separation. 4. Presence of crystalline phase at high processing temperature. 5. Sapphire is compatible with bioactive glass.

• 한국광학회:학술대회논문집
• /
• 한국광학회 1990년도 제5회 파동 및 레이저 학술발표회 5th Conference on Waves and lasers 논문집 - 한국광학회
• /
• pp.115-120
• /
• 1990

The spectroscopic properties of Cr3+-doped sapphire and Ti3+-doped sapphire fibers are reported. Tensile stress produces blue shifts of the R lines and changes in their radiative lifetimes and integrated intensities which can be correlated to stress-induced changes of the crystal-field parameters in a Cr3+-doped sapphire fiber. A net red shift of the zero phonon fluorescence line of 2Eg state and a decrease of the splittings of 2T2g state with uniaxial stress are observed in a Ti3+-doped sapphire. In excitation spectra the two peaks from the 2Eg state are shifted to the blue with different rates. The changes are attributed to the stress-induced changes of crystal field and Jahn-Teller effect.

• 한국광학회지
• /
• 제16권6호
• /
• pp.490-493
• /
• 2005

본 논문은 광자 결정 광섬유에서 100 fs의 펄스 폭을 갖는 펌프 광원의 파장과 입력파워에 따른 초 광대역 광원 생성에 대해 실험적으로 연구하였다. 적절한 파라미터들을 조절함으로써 광 스펙트럼 진폭의 균일함이 10 dB 이내에서 약 750 nm의 스펙트럼 폭을 갖는 초 광대역 광원을 얻어냈다. 사용한 광자 결정 광섬유의 길이는 2 m였고, 펌프광원으로는 모드 록킹된 Ti:Sapphire laser를 사용하였다. 또한, 펌프 광원의 여러 가지 변수들을 바꿔줌으로써 초 광대역 광원의 다양한 스펙트럼 현상을 조절할 수 있었다.

• The Korean Journal of Ceramics
• /
• 제3권3호
• /
• pp.208-212
• /
• 1997

Shear-induced phase transformation behavior of chemically stabilized $\beta$-cristobalite was studied by the fiber push-out technique. To obtain the critical grain size for phase transformation, the hot-pressed polycrystalline $\beta$-cristobalite, which was used as the interphase between fiber and matrix, was annealed at $1300^{\circ}C$ for 10h. Two types of fibers, mullite and sapphire fiber, were used in this study. Debonding between mullite fiber and cristobalite interphase occurred at a critical load of 230 MPa. Static friction and fiber sliding were continuously followed by debonding. Shear-induced transformation induced cracks in the cristobalite interphase at the debonding stage. In the case of the sapphire fiber, the debonding occurred at a lower load of 180 MPa due to the residual stress in the interface caused by the difference in thermal expansion coefficients between the fiber and the cristobalite interphase. The load was insufficient for shear-induced phase transformation.

• 한국결정성장학회지
• /
• 제9권4호
• /
• pp.432-436
• /
• 1999

Fiber growth of $Al_{2}O_{3}/R-Al-O$ (R = Y, Gd, Dy, Ho, Er) eutectic by the micro-pulling down method is described. The thermal stability and strength at elevated temperature of each materials is evaluated in relation to the microstructure.

• 한국광학회지
• /
• 제18권5호
• /
• pp.345-350
• /
• 2007

광결정 광섬유에서 생성되는 초 연속스펙트럼의 특성을 일반화된 비선형 슈뢰딩거 방정식과 split step 퓨리에 방법을 이용하여 전산모사 하였다. 그 결과를 바탕으로 200 fs 펄스폭을 갖는 Ti:sapphire 레이저와 광결정 광섬유를 이용하여 650nm부터 900nm에 이르는 파장영역에서 ${\pm}4dB$ 이하의 평탄도를 가지는 초 연속스펙트럼을 실험적으로 생성하였다.

• 마이크로전자및패키징학회지
• /
• 제28권1호
• /
• pp.55-60
• /
• 2021

유연한 특성을 유지하면서 높은 접착력을 가진 웨어러블 디스플레이를 제작하기 위하여 전해도금법을 이용한 접착법을 진행하였다. 또한 섬유에 접착된 LED의 사파이어 기판을 제거하기 위하여 LLO 전사법을 이용하였다. 그 후 전해도금을 이용한 접착법을 진행한 샘플의 SEM, EDS 데이터를 통하여 실제로 구리가 섬유직물의 격자사이를 관통하여 성장하며 광원과 섬유를 고정시켜주는 것을 확인하였다. 구리의 접착특성을 확인하기 위하여 Universal testing machine (UTM)을 이용하여 측정하였다. 도금 접착 후 laser lift-off (LLO) 전사공정을 완료한 샘플과 전사공정을 진행하지 않은 LED의 특성을 probe station을 이용하여 비교하였다. 공정 이후의 광원의 특성을 확인하기 위하여 인가 전류에 따른 electroluminescence (EL)을 측정하였다. 전류가 증가할수록 온도가 상승하여 Bandgap이 감소하기 때문에 spectrum이 천이하는 것을 확인하였다. 또한 radius 변화에 따른 샘플의 전기적 특성 변화를 probe station을 이용하여 확인하였다. Radius 변형에도 구리가 bending stress를 견딜 수 있는 기계적 강도를 가지고 있어 Vf 변화는 6% 이하로 측정되었다. 이러한 결과를 토대로 웨어러블 디스플레이 뿐만 아니라 유연성이 필요한 배터리, 촉매, 태양전지 등에 적용되어 웨어러블 디바이스의 발전에 기여할 수 있을 것으로 기대한다.