• Computers and Concrete
• /
• v.26 no.4
• /
• pp.317-325
• /
• 2020

A precise estimation of the natural time period of buildings improves design quality, causes a significant reduction of the buildings' weight, and eventually leads to a cost-effective design. In this study, in order to optimise the reinforced concrete frames design, some symmetrical and unsymmetrical buildings composed of solid and hollow members have been simulated using finite element software SAP 2000. In numerical models, different parameters such as overturning moment, story drift, deflection, base reactions, and stiffness of the buildings were investigated and the results have been compared with strength and serviceability limit criteria proposed by Australian Standard (AS 3600 2018). Comparing the results of the numerical modelling with existing standards and performing a cost analysis proved the merits of hollow box sections compared to solid sections. Finally, based on numerical simulation results, two equations for natural time period of moment resisting reinforced concrete buildings have been presented. Both derived equations reflected higher degree of correlation and reliability with different complexities of building when compared with existing standards and relationships provided by other scholars. Therefore, these equations will assist practicing engineers to predict elastic behaivour of structures more precisely.

• Journal of Bio-Environment Control
• /
• v.15 no.4
• /
• pp.352-357
• /
• 2006

Results of development and activity of roots by rootstock sort of oriental melon were followed; Grafted seedlings had higher root growth than self-roots seedlings and among grafted seedlings, Shintozoa and Elite rootstocks had higher root growth. Grafted seedlings had more xylem exudate, which connects activity of roots, than self-root seedlings. Development of roots and increase of xylem exudate were better in higher temperature. Marketable yield was higher in grafted seedling and quality of fruit was higher in self-root seedling.

• Laser Solutions
• /
• v.14 no.1
• /
• pp.14-18
• /
• 2011

Semiconductor industry demands decrease in line/space dimensions of IC substrates. Particularly for IC substrates for CPU, line/space dimensions below $10{\mu}m/10{\mu}m$ are expected to be used in production since 2014. Conventional production technologies (SAP, etc.) based on photolithography are widely agreed to be reaching capability limits. To address this limitation, the embedded circuit fabrication technology using laser ablation has been recently developed. In this paper, we used a nanosecond UV laser and a picosecond UV laser to fabricate embedded circuit patterns into a buildup film with $SiO_2$ powders for IC substrate. We conducted SEM and EDS analysis to investigate surface quality of the embedded circuit patterns. Experimental results showed that due to higher recoil pressure, picosecond UV laser ablation of the buildup film generated a better surface roughness.

• Current Research on Agriculture and Life Sciences
• /
• v.3
• /
• pp.92-98
• /
• 1985

The experiments were conducted to investigate the activity changes of peroxidase, existence of isoenzyme and the changes of reserved substances in tomato under subatmospheric pressure storage condition. The results obtained were as follows: 1. Soluble fraction showed the highest peroxidase activity and followed by cell wall fraction, mitochondria fraction and ribosome fraction in that order. 2. Peroxidase activity was decreased during the ripening and senescence period in tomato. Especially, peroxidase activity in tomato was higher at a room temperature ($25^{\circ}C$) than at a low temperature ($15^{\circ}C$). The decreasing inclination was similar in both treatment. The peroxidase activity was higher in 380 Torr, than in 570 Torr. 3. At least, two isoperoxidases(Soluble or solubilized) were identified from different extraction procedures. Three of four isoenzymes were recognized from a vertical slab of polyacrylamide gel electrophoresis. 4. The changes of components in tomato under SAP were generally affected by temperature and pressure. Especially, quality of tomato stored at a low temperature ($15^{\circ}C$) and SAP (380 Torr.) was best during storage.

• Journal of Digital Convergence
• /
• v.15 no.10
• /
• pp.429-436
• /
• 2017

A design thinking-based collaborative workshop in which various stakeholders in the milk processing industry circulation ecosystem participated shows a new problem innovation paradigm that encourages the spread of practical prototyping culture. in the expression of empathy and collective intelligence among members on facing issues, the conversion of collaboration and communication methods, the business handling of the organization based on the design work method as 'creativity mechanism'. In this workshop, which was promoted in three stages of 'approach to problems', 're-definition of problems', and 'experience-based future vision design', participants themselves redefine real problems in terms of the accuracy of feed orders between feed suppliers and livestock farmers, ordering of feeds on time, cost reduction of feed supply and present new alternatives and expanded business areas. The results suggested in this workshop suggest the usefulness of design thinking in business innovation in that they presented how to approach the problem and a creative thinking system to find its solution to direct and indirect stakeholders of the industry as well as the improvement of supply and demand rate of livestock feed and quality.

• Korean Journal of Agricultural Science
• /
• v.38 no.3
• /
• pp.405-411
• /
• 2011

In this study, we evaluated the changes of fruit quality indices during fruit development and ripening in Korean new pear cultivar 'Wonhwang' and 'Whasan' to determine appropriate harvest time and to enhance the marketability. The fruit of each cultivar harvested from 100 days after full bloom (DAFB) to 135 and 150 DAFB in 'Wonhwang' and 'Whasan', respectively. The fruit growth of both cultivars showed a typical single sigmoidal pattern. Flesh firmness of two cultivars decreased continuously with fruit development and ripening, reaching a final level of about 2.6 kgF at harvest stage. The starch content of fruit sap was much higher in the fruits of early development stage than the later stage of fruit ripening. In 'Wonhwang' pears, the starch level decreased coincide with fruit ripening (130 DAFB), while that of 'Whasan' decreased from very early stage of fruit development (120 DAFB), 30 days before full ripe. 'Whasan' pear showed much lower acidity level of about 0.13% during fruit development and ripening period compared with that of 'Wonhwang'. Therefore, the ratio of soluble solids to total acidity (TSS/acid) increased gradually with fruit development and ripening, reaching a final level of 80 and 98 in 'Wonhwang' and 'Whasan', respectively. There were no climateric rise of fruit respiration during fruit ripening periods in two oriental pear cultivar. The changes of skin color difference including hunter vale $a^*$ which means loss of green color occurred only after onset of ripening in two cultivars.

• Journal of the Korean Applied Science and Technology
• /
• v.34 no.1
• /
• pp.12-24
• /
• 2017

The main purpose of this research is for the investigation on the impact of engine oil aging on PM and DPF. It is widely known that lubricant specifications and consumption from an ICE have significantly influenced on the regulated and unregulated harmful emissions as the engine operating conditions. Considering DPF clogging phenomena with lubricant-derived soot/ash components, simulated aging mode for the DPF was newly designed for engine dynamometer testing. PM/ash accumulation cycle were developed in reflecting real-world engine operating conditions for the increment of engine oil consumption and natural DPF regeneration for the ash accumulation. The test duration for DPF aging reached around 100hrs with high- and low-SAPS engine oils, respectively. Using high SAPs engine oil made more PM/ash accumulation compared with low SAPs engine oils and it could accelerate fouling of EGR in engine. Fouling of EGR made effects on more harmful exhaust gases emissions. The test results on engine lubricant under engines operating conditions will deliver for the establishment of regulated and unregulated toxic emissions policy, lubricant quality standard.

• Research in Plant Disease
• /
• v.10 no.2
• /
• pp.145-149
• /
• 2004

'Hongro' is one of the most important apple cultivars whose growing area is increasing because of its good quality. Recently fruit shrinking symptom causing decrease of fruit size, juice, and quality, appears in some commercial 'Hongro' orchards. The average frequency of occurrence of fruit shrinking symptom was 12 % of total trees investigated and Apple chlorotic leaf spot virus (ACLSV) was detected from all the trees showing fruit shrinking symptom by ELISA. A typical virus infection symptom of leaf epinasty and stem necrosis appeared on woody indicators, Spy227 and Virginia crab grafted with infected trees and all the grafted trees showed positive reaction to ACLSV antiserum by ELISA. It was proved that ACLSV can be easily transmitted by grafting. ACLSV was also isolated from the leaves of C. quinoa inoculated with sprouting leaf sap of infected trees. To prove that the fruit shrinking symptom was caused by ACLSV infection, ACLSV-infected scion was grafted on virus-free 'Hongro/M9' and the fruit characteristics were investigated. Consequently the same symptoms of fruit size and juice decreasing were observed from the trees grafted with ACLSV-infected scion. Therefore, it is suggested that the fruit shrinking symptom is caused by ACLSV infection and 'Hongro' can be classified as sensitive cultivar to ACLSV.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.42 no.4
• /
• pp.1-7
• /
• 2019

The customer of massage chair is expanding day by day from middle age to all ages. In 2018, the market size was 700 billion KRW, an increase of 30 times over 10 years. However, most related SMEs suffer from excessive competition by the market monopoly of some major companies. In this situation, in order for a related company to survive, it is necessary to steadily research and develop new products. Founded in 2009, company L produces massage chairs for health and relaxation of customers. L's products use a sound wave vibration module that is favorable for human body, unlike other products that use vibration motor type. However, frequent breakdowns of massage chair due to the vulnerability of plate (leaf) springs, which play an important role in sound wave vibration modules, made sap its competitiveness. In this paper, we propose a method to design desirable plate spring structure by sequentially experimenting with five different plate springs. The results of this study are expected to contribute to improve the quality of plate spring and the reliability of sound wave vibration module. In the future, it is necessary to find a way to use it in the development of foot massage or scalp management device as well as continuous research to find optimal plate spring structure through various analysis.

• The Journal of Korean Academy of Prosthodontics
• /
• v.29 no.1
• /
• pp.167-213
• /
• 1991

The successful replacement of missing teeth has been one driving aim behind the emergence of implant dentistry as both a technology and clinical vocation for over four decades. To date, a multitude of dental implant devices had been designed and utilized in the patient population. Most of these devices have been designed without support of the engineering criteria. The long-term success of any dental implant is dependent upon the optimization of stresses which occurs during oral function and parafunction. Although many studies have examined the biologic interactions between dental implants and living tissue, few studies have been reported on the biomechanical aspects of dental implants. The purpose of this study was to analyze the stress distribution of osseointegrated prosthesis on certain conditions, such as amount of load, location of load, length of fixtures, number of fixtures used, arch shape, bone quality, etc. Three dimentional finite element analysis was used for this study. FEM models were created using commercial software(Super SAP. for IBM 16 bit AT computer. All elements were 8-node brick, isoparametric. Mandible and prosthesis was modeled with 780 elements and 1074 nodes. The results were as follows : 1. In case of cantilever extension, there was a compressive stress at the base of the first implant and a tensile stress at the base of the second implant. 2. The stresses were linearly proportional to the amount of load. 3. The stresses were linearly proportional to the length of cantilever. 4. There was a stress concentration at the neck of the implant and bone under horizontal loads.