• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.21 no.3
• /
• pp.427-435
• /
• 1997

Conditional sampling techniques are utilized to investigate the relation between the wall skin-friction and stream wise velocity fluctuations in a turbulent boundary layer. Conditionally averaged results using a peak detection and the VITA (variable-interval time-averaging) technique show that a high skin friction is associated with high frequency components of the wall skin-friction fluctuations. The conditionally averaged wall skin-friction fluctuations obtained by using the VITA technique have a positively-skewed characteristics compared with the conditionally averaged stream wise velocity fluctuations. It is confirmed that there exists a phase shift between the wall skin-friction and stream wise velocity fluctuations, which was also found from the long-time averaged space-time correlations. The amount of phase shift between the wall skin-friction and stream wise velocity fluctuations is the same as that from the long-time averaged space-time correlations and does not change despite the variation of the detection threshold.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.15 no.5
• /
• pp.949-958
• /
• 2020

The functions of shock absorbers are to dampen body, suspend motions, dissipate impact energy, and control tire force variation. During the operation, hydraulic oil is passed between the chambers via a flow restrictions. Therefore the damping force characteristics of shock absorber is determined by the characteristics of orifices and flow restrictions. The uncertainty in design variable affects the performance of suspension system strongly. But, the researches about the influence of uncertainty in design variable such as a fluid restriction's property of shock absorber, on the suspension system performance was hardly ever proposed. In this paper, we used statistical method of Latin Hypercube sampling, and the effects of design variables uncertainty on the performance of suspension system was presented.

• Korean Journal of Environmental Agriculture
• /
• v.19 no.5
• /
• pp.419-425
• /
• 2000

Rating curve method and SWMM (Storm Water Management Model) were applied to estimate pollutant loading from Hwa-Ong watershed in Kyunggi-Do. Rating curves were derived from sampling sites and applied to the whole watershed. SWMM version 4.4 was calibrated by field data of sampling sites and applied to the whole watershed. The pollutant loading estimated by rating curve was slightly higher than the one by SWMM, but the difference was not significant considering diffuse pollution characteristics of wide variation. Land use effect of the subcatchments could not be incorporated logically in rating curve method and difficulty in extrapolation was experienced, therefore, the estimate by rating curve method was thought to be less confident. SWMM was satisfactory in estimation of pollution loading, and its great flexibility worked well to describe complex nonurban land uses. Neither of them could exactly describe complex natural phenomena, but SWMM was preferred in this study due to its flexibility and logical hydrologic processes including land use effects. Use of reasonable watershed model rather than rating curve method for watershed pollutant loading estimate can be more practical and is recommended.

• Korean Journal of Environmental Biology
• /
• v.19 no.2
• /
• pp.137-145
• /
• 2001

Although tidal current affects the distribution of zooplankton significantly, its impacts were usually ignored when the studios on the zooplankton abundance were conducted even in the Yellow Sea where tidal current was very strong. Furthermore, information on the tidal impacts was very limited in the Yellow Sea. In this study, the tidal current effects on the abundances of copepod genera Acartia, Calanopia, Calanus, Centropages, Corycaeus, Labidocera, Paracalanus, Tortanus in a fixed sampling station near the Sonanjido (Island) were studied. The abundance of copepods collected by the same sampling method nab highest when the tidal current was fastest at 2 or 3 hours after the high or low tide.

• Ocean and Polar Research
• /
• v.35 no.2
• /
• pp.181-191
• /
• 2013

To investigate the occurrence of modern living planktonic foraminiferal species and their seasonal variations around Jeju Island, we conducted planktonic foraminiferal sampling at KIOST's regular sampling sites during 16 months. In total seven genus and 16 modern planktonic foraminiferal species were identified with six dominant species. Dominant species were Gloigerinoides sacculifer, Globigerinoides ruber, Globigerina bulloides, Noegloboquadrina dutertrei, Pulleniatina obliquiloculata, and Globorotalia inflata. Most of the species were characterized as being typical subtropical species and showed seasonal variations and/or intermittent occurrence from season to season. The occurrence of living foraminifera revealed a strong relationship with water temperature, but not with salinity. Species succession seems to occur along with water temperature changes. Some patch distribution and water temperature dependences appear to be significant since there is a high degree of variation in the occurrence patterns of species and standing stock. More detailed quantitative study is necessary to confirm the species diversity and seasonal variations of planktonic foraminifera and related ocean environmental changes.

• Journal of Korean Society for Atmospheric Environment
• /
• v.21 no.E3
• /
• pp.107-113
• /
• 2005

Using a sampling device of our own making, airborne pollen has been monitored in Kyoto, Japan from the middle of February to the end of May 2004. From the morphological analysis of pollen grains by Scanning Electron Microscope (SEM), it was possible to identify some pollen types like Cryptomeria, Pine, Alder, Cyclobalanopsis, Chamaecyparis, and Equisetum. Daily average airborne pollen counts show strong variations from the day to day which makes the appropriate daily forecasts that could be of practical use for patients difficult. Diurnal variation of airborne pollen grains at our local sampling site is very irregular and shows no similarity between pollen types. The highest concentrations of Cryptomeria and Alder pollens in the south -west wind directions might be attributed to the airborne pollen transport, while the increase in Pine pollen grain in the southern wind direction was probably due to the local spread. Prevailing wind direction (SW) during the pollinating periods of Cryptomeria and Alder pollens could suggest a long-distance transport from a distant mountain.

• Asian-Australasian Journal of Animal Sciences
• /
• v.19 no.8
• /
• pp.1139-1147
• /
• 2006

This study was conducted to evaluate the trace elemental nutritive values of soil and forages collected from southwestern part of the province of Punjab, Pakistan. Soil and forage samples were collected fortnightly for two seasons. The concentrations of some trace minerals varied greatly among seasons and sampling periods. Seasonal effects were found in all soil micro-minerals except zinc, while forage iron, zinc, and selenium were affected by seasonal changes. Sampling periods effects were observed in all soil minerals and in forage copper, iron, zinc, and manganese only. All soil mineral levels except cobalt and selenium were sufficiently high to meet the requirements of plants for normal growth during both seasons. In contrast, soil Co and Se levels were severely deficient during both seasons and considered inadequate for plant growth. Soil Fe, Zn, Co, and Se levels were higher, and Cu and Mn lower during winter than those during summer. Forage Zn levels during summer were at marginal deficient levels, and in contrast, all other forage micro-minerals were within the required range for ruminants during both seasons. Although forage mico-minerals were within the range required by the ruminants, they were not sufficiently high to prevent the predisposition to various diseases caused by nutrient deficiency. Consequently, grazing animals at this location need continued mineral supplementation of these elements with a mixtures of high bio-availability rather than of high micro-mineral contents to support optimum ruminant productivity.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.16 no.2
• /
• pp.91-100
• /
• 2006

The purpose of this study was to validate alternative method by using non-carcinogenic, and less toxic solvents than NIOSH analytical method 5524 for measuring the airborne MWFs in workplaces. In laboratory tests, the ETM solvents(mixture of same volume for ethyl ether, toluene, and ethanol) were selected. The alternative method of analyzing MWFs, referred to as the ETM solvent extraction method, showed 0.04 mg/sample as LOD, and 0.15 mg/sample as LOQ. The analytical precision (pooled CV, coefficient of variation) of the ETM solvent extraction method for analyzing the straight, soluble, semisynthetic, and synthetic metalworking fluid was 1.5%, 2.0%, 2.6%, 1.6%, respectively, which was similar to the precision (2.6%) of NIOSH analytical method (NIOSH 0500) for total dust. The analytical accuracy by recovery test, spiked mass calculated as extractable mass, was almost 100%. As the result of storage stability test, metalworking fluid samples should be stored in refrigerated condition, and be analyzed in two weeks after sampling. The 95% confidence limit of the estimated total standard error for the ETM solvent extraction method for analyzing the straight, soluble, semisynthetic, and synthetic metalworking fluid was ${\pm}12.6%$, ${\pm}12.5%$, ${\pm}14.0%$, and ${\pm}13.6%$, respectively, which satisfied the OSHA sampling and analytical criteria.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.51 no.3
• /
• pp.9-14
• /
• 2009

Flow and pollution load were monitored at 2 combined sewer outlets (C-1 and C-2) of urban watersheds during dry weather from September, 2004 to April, 2006 for 20 months. The objectives were to investigate the diurnal variation of flow and pollutant load and to find the proper sampling time that could measure representative flow and pollutant load. Pollution load closed to the average daily load at C-1 could be measured at 00:00 hour and by the mean of 15:00 and 18:00 hour measures, and 15:00 and 21:00 hour measures, respectively. In addition at C-2, it was 21:00 hour and the mean of 15:00 and 18:00 hour measures. This study concluded that arbitrary sampling of flow and water quality could cause large errors in the estimation of urban pollution load and recommended that urban combined sewers should be monitored when flow and water quality showed daily average and concentration.

• The Bulletin of The Korean Astronomical Society
• /
• v.36 no.2
• /
• pp.81.2-81.2
• /
• 2011

Motivated by recent attempts to derive geomagnetic activity from hourly mean data in long term studies, we test the recursive Kalman filter method to obtain the regular solar variation curve of the geomagnetic field. Using a simple algorithm, we are able to assign a quiet day curve to every day separately, without the need for additional input parameter(s) to define the geomagnetically quiet days. We derive a digital counterpart AhK of the analog range index Ak at the subauroral Sodankyl$\ddot{a}$ station and compare it to the earlier digital estimate Ah and the local Ak index. We find that the new method outperforms the former estimate in every aspect studied and provides a robust, straightforward manner of estimating and verifying the manually scaled Ak index, based on readily available hourly values. The model is independent of sampling; thus, for shorter term studies where high-sampling data are available, more accurate estimates can also be obtained when needed. Therefore, in contrast to other recent approaches, we do not provide a method to quantify irregular activity directly but derive the actual quiet day curves in the traditional manner. In future applications the same algorithm may be used to define a wide variety of geomagnetic indices (such as Ak, Dst, or AE).