• 한국군사과학기술학회지
• /
• 제22권4호
• /
• pp.527-535
• /
• 2019

Hanger in a rail-launched missile protrudes in general and causes to increase significant drag force. One method to avoid the significant increase of drag force is to apply fairings on the hanger. In this paper, sloping shaped fairing parameters of height, width, and length are optimized to minimize the drag force under subsonic speed region by examining three configurations of fairings : front-fairing only, rear-faring only, and the both front and rear fairing. We use Latin Hypercube Sampling method to determine the experimental points, and computational fluid dynamics with incompressible RANS solver was applied to acquire the data at sampling points. Then, we construct a meta model by kriging method. We find the best choice among three configurations examined : both front and rear fairing reduce the drag force by 63 % without the constraint of fairing mass, and front fairing reduced the drag force by 52 % with the constraint of hanger mass.

• Journal of applied mathematics & informatics
• /
• 제8권1호
• /
• pp.243-252
• /
• 2001

The points of failure of a decomposition process are defined to be the union of the points of failure from two component point processes for software reliability systems. Because sampling from the likelihood function of the decomposition model is difficulty, Gibbs Sampler can be applied in a straightforward manner. A Markov Chain Monte Carlo method with data augmentation is developed to compute the features of the posterior distribution. For model determination, we explored the prequential conditional predictive ordinate criterion that selects the best model with the largest posterior likelihood among models using all possible subsets of the component intensity functions. A numerical example with a simulated data set is given.

• 전기학회논문지
• /
• 제58권4호
• /
• pp.735-741
• /
• 2009

This paper presents an algorithm for the permanent magnet shape optimization of a large scale BLDC(Brushless DC) motor to minimize the cogging torque. A response surface method (RSM) using multiquadric radial basis function is employed to interpolate the objective function in design parameter space. In order to get a reasonable response surface with relatively small number of sampling data points, additional sampling points are added on the basis of design sensitivity analysis computed by using FEM. The algorithm has 2 stages: the first stage is to determine the PM arc angle, and the 2nd stage is to optimize the magnet pole shape. The developed algorithm is applied to a 5MW BLDC motor to get a minimum cogging torque. After 3 iterations with 4 design parameters, the cogging torque is reduced to 13.2% of the initial one.

• 한국산학기술학회논문지
• /
• 제12권2호
• /
• pp.581-587
• /
• 2011

계수형 데이터를 이용하여 신뢰도를 추정하는 방법은 원자력 설비, 의약품, 우주발사체 등과 같은 다양한 시스템의 신뢰도 평가에 사용되고 있다. 본 논문은 모수 추정법을 포함하여 문헌에 공개된 신뢰도 추정방법에 대한 샘플 수 및 샘플링 시점 수 변화에 대한 정확성의 민감도를 분석하고 비교한 결과를 제시한다. 또한 민감도 분석 결과를 이용하여 각 추정 방법의 정확성을 향상시키기 위한 방안을 제시하였다.

• 한국환경과학회지
• /
• 제16권1호
• /
• pp.27-32
• /
• 2007

In this study, the concentrations of offensive odorous compounds seasonally emitted from the chemical plant at Chongju industrial complex in Korea were determined by the analytical methods of gas chromatography, high performance liquid chromatography and uv/vis spectroscopy. The kinds of offensive odorous compounds examined are formaldehyde, acetaldehyde, butyl aldehyde, propion aldehyde, n-valeric aldehyde, iso-valeric aldehyde, hydrogen sulfide, methyl mercaptan, dimethyl sulfide, dimethyl disulfide, trimethyl amine and ammonia. The seasonally emission levels of all odorous compounds except dimethyl sulfide at 13 sampling points of plant were lower than those of the regulation standard levels of the industrial complex in Korea. The levels were the highest in June, and lowest in December. The propion aldehyde and iso-valeric aldehyde in June and December, butyl aldehyde in December, and n-valeric aldehyde were not detected in all the three seasons at any sampling points of the plant examined. But in June, dimethyl sulfide was emitted up to 16 times than that of the regulation level.

• 한국환경과학회지
• /
• 제16권1호
• /
• pp.33-38
• /
• 2007

The concentrations of offensive odorous compounds emitted from the two chemical plants in Chongju and Yeosu industrial complex in Korea were determined by uv/vis spectroscopy, gas chromatography, and high performance liquid chromatography. The odorous compounds examined in this study are ammonia, trimethyl amine, formaldehyde, acetaldehyde, propion aldehyde, butyl aldehyde, n-valeric aldehyde, iso-valeric aldehyde, hydrogen sulfide, methyl mercaptan, dimethyl sulfide and dimethyl disulfide. The concentrations of those were determined from the 10 sampling points of the two plants, respectively. The emission concentrations of all odorous com-pounds examined in the two plants were lower than those of the regulation standard levels of industrial complex in Korea, respectively. The propion aldehyde, n-valeric aldehyde, methyl mercaptan and dimethyl disulfide in Chongju and Yeosu plants, and butyl aldehyde and iso-valeric aldehyde in Yeosu plant were not detected at any sampling points examined.

• 한국지능시스템학회논문지
• /
• 제15권6호
• /
• pp.765-770
• /
• 2005

This paper presents a new intelligent digital redesign (IDR) method via the compensated bilinear transformation to design the digital controller such that the digital fuzzy system is equivalent to the analog fuzzy system in the sense of the state-matching. This paper especially consider a multirate control scheme with a predictive feature, where the digital control input is held constant N times between the sampling points. More precisely, the multirate control scheme is proposed that utilizes a numerical integration scheme to approximately predict the current state from the state measured at the sampling points, the delayed measurements. For this system, the IDR conditions incorporated with stabilizability in the format of the linear matrix inequalities (LMIs) are derived. The superiority of the proposed technique is convincingly visualized through a numerical example.

• 한국조리학회지
• /
• 제20권1호
• /
• pp.120-132
• /
• 2014

본 연구의 목적은 대학생의 밀집지역인 경산시 대학생을 대상으로 향토음식에 대한 중요도와 만족도를 파악하여 향토음식점의 효율적인 마케팅 방향을 제시하고 향토음식점의 활성화에 유용한 정보를 제공하고자 하는데 있다. 표본은 편의표본추출법(convenience sampling)을 이용하여 측정은 5점 Likert에 의해 실시되었으며, 연구결과를 요약하면 다음과 같다. 대학생들은 향토음식점에 대해 음식의 청결성(4.69점), 음식의 맛(4.57점), 식재료의 신선도(4.56점), 메뉴의 가격(4.20점) 등이 중요하다고 인식한 반면에 음식의 양(3.34점), 요리에 대한 설명(3.58점), 메뉴의 정통성(3.59점) 등에 대해서는 낮은 중요도를 나타내었다. 대학생들의 향토음식에 대한 만족도(실행도)는 음식의 맛(3.55점), 요리의 향기(3.47점), 음식의 양(3.39점) 등에 대해 높은 만족도를 나타낸 반면에 요리에 대한 설명(2.61점), 메뉴의 독창성(2.75점), 메뉴의 정통성(2.94점) 등은 상대적으로 낮은 만족도를 나타내었다. IPA 결과, '음식의 맛', '음식의 청결성', '식재료의 신선도', '요리의 향기', '요리의 질감', '음식의 영양'은 고객들이 매우 중요하게 여기면서 향토음식점에서도 잘 지켜지고 있어 계속 유지해 주어야 하는 항목으로 나타났고 '메뉴의 가격', '메뉴의 독창성'은 고객들이 중요하게 여기지만 향토음식점에서 실행도가 낮아 만족도가 떨어지는 것으로 집중적으로 관리해야 할 항목으로 나타났다.

• 한국CDE학회논문집
• /
• 제17권5호
• /
• pp.375-386
• /
• 2012

Most engineering design problems require analyses or simulations to evaluate objective functions. However, a single simulation can take many hours or even days to finish for many real world problems. As a result, design optimization becomes impossible since they require hundreds or thousands of simulation evaluations. The surrogate-based optimization (SBO) strategy became a remedy for such computationally expensive analyses and simulations. A surrogate-based optimization strategy has been developed in this study in order to improve global optimization performance. The strategy is a heuristic algorithm and it exploits not only multiple surrogates, but also multiple optimizers. Multiple optimizations of multiple surrogate models yield multiple candidate design points of optima. During the sequential sampling process, the algorithm ranks candidate design points, selects the points as many as specified, and builds the improved surrogate model. Various mathematical functions with different numbers of design variables are chosen to compare the proposed method with the other most recent algorithm, MSEGO. The proposed method shows superior performance to the other method.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제15권4호
• /
• pp.300-304
• /
• 2015

A low bit rate speech coder based on the non-uniform sampling technique is proposed. The non-uniform sampling technique is based on the detection of inflection points (IP). A speech block is processed by the IP detector, and the detected IP pattern is compared with entries of the IP database. The address of the closest member of the database is transmitted with the energy of the speech block. In the receiver, the decoder reconstructs the speech block using the received address and the energy information of the block. As results, the coder shows fixed data rate contrary to the existing speech coders based on the non-uniform sampling. Through computer simulation, the usefulness of the proposed technique is shown. The SNR performance of the proposed method is approximately 5.27 dB with the data rate of 1.5 kbps.