• Journal of the Korean Society for Precision Engineering
• /
• v.28 no.11
• /
• pp.1297-1308
• /
• 2011

The light-weight design of UTM (Urban Transit Maglev)-02 car-body frames are performed, based on initial configuration. The thicknesses of fourteen sub-structures are defined as design variables and the loading condition is considered according to weight of sub-structures, electronic and pneumatic modules and passengers. For efficient and robust process of design optimization, objective function and constraints are approximated by response surface approximation. Structural analysis is performed at some sampling points to construct the approximated objective function and constraints composed of design variables. Design space is changed to find many optimal candidates and best optimal design can be found eventually. The Matlab Optimization Toolbox is used to find optimal value and sensitivity analysis about each design variable is also performed.

• Smart Structures and Systems
• /
• v.11 no.1
• /
• pp.35-51
• /
• 2013

Over the last two decades Wavelet Transformation (WT) method has been widely utilized for the damage identification of structures. The main objective of this paper is to discuss and present some of common shortcomings and limitations of mathematical software, as well as other precautionary measures that need to be considered when using them for wavelet analysis applications. Due to popular usage of MATLABMATLAB(R) comparing to other mathematical tools among researchers for data processing of structural responses through WT analysis, this software was chosen for specific study. To the best of the authors' knowledge, these limitations and observations have not been previously identified or discussed in the literature. In this work, a square plate with a severe damage, in form of a crack, parallel to the left edge of the plate is selected for a pilot study. The steady state harmonic response is used for measuring the deflection shape across the line parallel to one edge and perpendicular to the damage. Several criteria and cases such as the smallest size damage that can be detected, correlation between the crack width and the number of sampling points, and the influence of the damage thickness on the accuracy of the result are investigated.

• Structural Engineering and Mechanics
• /
• v.62 no.3
• /
• pp.345-355
• /
• 2017

The aim of the present study is to develop an elemental approach based on the differential quadrature method for free vibration analysis of cracked thin plate structures. For this purpose, the equations of motion are established using the classical plate theory. The well-known Generalized Differential Quadrature Method (GDQM) is utilized to discretize the governing equations on each computational subdomain or element. In this method, the differential terms of a quantity field at a specific computational point should be expressed in a series form of the related quantity at all other sampling points along the domain. However, the existence of any geometric discontinuity, such as a crack, in a computational domain causes some problems in the calculation of differential terms. In order to resolve this problem, the multi-block or elemental strategy is implemented to divide such geometry into several subdomains. By constructing the appropriate continuity conditions at each interface between adjacent elements and a crack tip, the whole discretized governing equations of the structure can be established. Therefore, the free vibration analysis of a cracked thin plate will be provided via the achieved eigenvalue problem. The obtained results show a good agreement in comparison with those found by finite element method.

• The Journal of Asian Finance, Economics and Business
• /
• v.4 no.2
• /
• pp.69-74
• /
• 2017

The purpose of this research is to be acquainted with the awareness and approval of halal supply chain among Indian manufacturers and distribution network members for haulage and warehousing activities from the perception of respective service suppliers. A total of 20 respondents, which consist of 10 transportation companies and 10 warehousing companies from the State of Andhra Pradesh in India were selected for the study by using purposive sampling method. The principal focal points of the discussions are on awareness and adoption of halal transportation and warehousing services chosen for the study in the comprehensive halal supply chain. A total of 90 percent and 70 percent of respondents from the transportation and warehousing companies respectively agreed that they know only about the concept of halal but do not have any exposure and ken on the halal supply chain. However, findings of this research won't have extensive validity in the market, gaining an enough familiarity with the halal supply chain in the Indian social context is of immense importance. This is a pioneering attempt aimed to investigate the awareness and adoption levels of halal supply chain among Indian businessmen which are precious for supply chain companies to customize their services in the country as well to the world of academia.

• Journal of Environmental Science International
• /
• v.22 no.6
• /
• pp.695-703
• /
• 2013

In this study, the effects of four major river project and Kumho River, second biggest branch of Nakdong River, were investigated to provide basic data for proper management of Nakdong River's water quality. Daily sampling processes at three different points, Munsanri (the upper side of Kangjung-Koryung weir), Kangchang (the outlet of the Kumho River) and Samunjin (the lower side of Kangjung-Koryung weir and junction of Kumho River and Nakdong River), were conducted from May 1st 2011 to Sep. 4th 2011. Water samples were analyzed for nine factors, DO, BOD, COD, T-N, T-P, pH, turbidity, SS, and coliform. As demonstrated by the results, concentrations of BOD, T-N, T-P and coliform at Nakdong River were affected by water quality of Kumho River while SS and turbidity were affected by constructions for Kangjung-Koryung weir. Further studies, for example, affects of wastewater treatment facilities, should be followed.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2006.03a
• /
• pp.1173-1180
• /
• 2006

In this study, aluminum electrodes were put in marine clay which was taken from the south coast in Korea to increase the undrained shear strength by inducing the densification and cementation between clay particles and precipitates which were developed by electric decomposition in an electrode. To raise the cementation rate and reduce treatment time, high electric current (2.5A) was applied in each electrode at a semi-pilot scale soil box with marine clay. After the tests, the undrained shear strength was measured at designated points using a static cone penetration test device and sampling was conducted simultaneously in order to measure water content, pH and electric conductivity which would be the key for configuring the cementation effects indirectly. In the results of electric decomposition in aluminum electrode, the measured shear strength was increased considerably compared to the initial shear strength because of the cementation effect between iron ions and soil particles.

• Journal of Forest and Environmental Science
• /
• v.31 no.2
• /
• pp.126-135
• /
• 2015

This study was conducted to evaluate the ecological characteristics of forest cover types which were classified by cluster analysis in the natural forest of Sobaeksan on the basis of the vegetation data from the point-quarter sampling method. Recognized forest cover types were 1) Mixed mesophytic forest, 2) Taxus cuspidata forest, 3) Fraxinus rhynchophylla-Quercus mongolica forest, 4) Betula ermanii forest, 5) Pinus densiflora forest, 6) Quercus mongolica mixed forest, and 7) Quercus mongolica pure forest. For those of classified types, the species composition was expressed by importance value (IV) to describe the community floristically. The species diversity was quantified using the Shannon's diversity index. The results showed that the forest cover types were characteristically different from one another in growing species and compositional rates, depending upon the type which was formed by a number of similar vegetational sample points. Species diversity indices (H') of total and overstory both were the highest in the mixed mesophytic forest (3.530 and 2.880, respectively), and lowest in the Q. mongolica pure forest (2.122 and 0.000, respectively) with only one canopy species. The highest species diversity in the mixed mesophytic forest may due to the relatively high species richness and evenness in the forest cover types. The description on ecological characteristics were suggested to understand the formation and development of forest cover types in this study area.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.13 no.2
• /
• pp.287-293
• /
• 1993

A mathematical formula and an experimental method were proposed to measure sediment oxygen demands (SODs) in streams and lakes. The SODs appeared to be the first order reaction with respect to dissolved oxygen concentration at the sampling points in the Suknamchun. The SODs estimated using the nonlinear regression analysis ranged from 2.48 to 5.33 g $O_2/(m^2{\cdot}day)$, which are fallen within the typical range (1.5 - 10.0 g $O_2/(m^2{\cdot}day)$ of the SODs in the moderately polluted streams. The proposed methods are found to be relatively simple and easy to use in estimating SODs in flowing or impounded waters.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.23 no.7 s.166
• /
• pp.1129-1138
• /
• 1999

[$Moir\acute{e}$] technique is now being extensively investigated as a fast non-contact means of three-dimensional profile measurement especially for reverse engineering. One problem with $moir\acute{e}$ technique is so called $2\pi$-ambiguity problem that limits the maximum step height difference between two neighboring sampling points to be less than half the equivalent wavelength of $moir\acute{e}$ fringes. In this investigation, a new two-wavelength scheme of projection $moir\acute{e}$ topography is proposed and tested to cope with the $2\pi$-ambiguity problem. Experimental results are discussed to assess the new method in measuring large objects with high step discontinuities.

• Women's Health Nursing
• /
• v.14 no.3
• /
• pp.196-204
• /
• 2008

Purpose: This study aimed to examine the effects abdominal breathing on anxiety and length of labor time in primipara women. Method: It was a quasi-experimental design with a non-equivalent comparison group, performed from October 11 to December 4, 2007. Thirty-six subjects who received pitocin and met the inclusion criteria were chosen by convenience sampling from the labor room of Y hospital located in Seoul. The intervention of abdominal breathing was 'four seconds of inhale, six seconds of exhale breathing method.' The abdominal breathing was carried out 30 times each when the uterine cervix was dilated $3{\sim}4cm$ and $5{\sim}6cm$. Psychological anxiety was measured by VAS-A before and after the cervix dilatation to $3{\sim}4cm$ and $5{\sim}6cm$. Result: Anxiety scores of the experimental was found lower than that of the control group at $3{\sim}4cm$(z=-3.05, p=.00) and $5{\sim}6cm$(z=-2.04, p=.04) of cervix dilatation. However, the abdominal breathing was not effective to the length of labor from the active phase thru full dilatation, though there was 56 minutes of difference between the two groups. Conclusion: Carrying out the abdominal breathing 30 times at two time points was effective in decreasing anxiety level during labor. Further study is suggested to examine the effects of abdominal breathing on labor time, fetal heart rate, and uterine contraction.