• 한국환경과학회지
• /
• 제6권1호
• /
• pp.33-44
• /
• 1997

In investigating heavy metal contents at specific areas, the method of selecting sampling points is Important A general method is, according to the law , random sampling of zigzag-form in the selected field. In this work, we studied whether the measured values obtained from a certain method of selecting sampling points is a representative of heavy metal contents in the selected field or not. The selected field for this study is located on the lower Yangsan-river: Gasan-li, Mulgum-myon, Yangsan-gun, KyoungNam, 1 km away from the mi, h stream of Nakdong river. The heavy metals investigated were Cd, Cr, Cu, Fe, Mn, Ni, Pb, and Zn. The inductively coupled plasma(ICPI atomic emission spectrometer was used to measure these metals quantitatively. The number of total sampling points were 24. We compared the total mean values with the mean obtained from various methods of selecting sampling points.

• Journal of Forest and Environmental Science
• /
• 제31권2호
• /
• pp.73-77
• /
• 2015

Acquiring accurate quantitative and qualitative information is necessary for the technical and scientific management of forest stands. In this study, stratification and systematic random sampling methods were used to estimation of quantitative characteristics in study area. The estimator ($((E%)^2xT)$) was used to compare the systematic random and stratified sampling methods. 100 percent inventory was carried out in an area of 400 hectares; characteristics as: tree density, crown cover (canopy), and basal area were measured. Tree density of stands was compared through systemic random and stratified sampling methods. Findings of the study reveal that stratified sampling method gives a better representation of estimates than systematic random sampling.

• Journal of the Korean Statistical Society
• /
• 제31권4호
• /
• pp.415-431
• /
• 2002

A unified framework for statistical inference for the mean of the normal distribution to derive point estimates, confidence intervals and statistical tests is proposed. This optimal design is justified after investigating the basic information and requirements that are possible and impossible to control when specifying practical and statistical requirements. Point estimation is only credible when viewed in the larger context of interval estimation, since the information required for optimal point estimation is unspecifiable. Triple sampling is proposed and justified as a reasonable sampling vehicle to achieve the specifiable requirements within the unified framework.

• 한국군사과학기술학회지
• /
• 제15권4호
• /
• pp.435-441
• /
• 2012

This paper provides simulation-based results of effect analysis of sample size and sampling periods on accuracy of reliability estimation methods using multiple comparisons with analysis of variance. Sum of squared errors in estimated reliability measures were evaluated through applying seven estimation methods for one-shot systems to simulated quantal-response data. Analysis of variance was implemented to investigate change in these errors according to variations of sample size and sampling periods for each estimation method, and then the effect analysis on accuracy in reliability estimation was performed using multiple comparisons based on sample size and sampling periods. An efficient way to allocate both sample size and sampling periods for reliability estimation tests of one-shot systems is proposed in this paper from the effect analysis results.

• 한국어류학회지
• /
• 제20권3호
• /
• pp.228-232
• /
• 2008

To investigate a proper sampling method for anchovy eggs and larvae in coastal waters of the South Sea, replicated samplings were made by different towing methods with different sampling gears and compared in terms of abundance and length composition. There was no significant difference in abundance in samples from vertical and oblique tows with a ring net. The abundance by replicated vertical tows with a ring net was not significantly different, but significant difference in abundance among sampling stations were found. The ring net sampled anchovy eggs in significantly greater numbers than collected by a NORPAC net, but both gears were not effective in obtaining quantitative samples of anchovy larvae larger than 3 mm. Therefore, samples by vertical tows with a ring net during the day at various stations is more efficient at estimating the density of anchovy eggs in an area compared to replicated sampling at a single station.

• 분석과학
• /
• 제8권4호
• /
• pp.739-744
• /
• 1995

The two main methods to prepare water samples for analyzing volatile organic compounds(VOC's) were investigated. One is the purge and trap(PT) method and another is the head space(HS) sampling method. Both methods were effective to transfer the low boiling point components from the water sample onto the capillary column. The cryo-focusing at the top of the main capillary column was an effective way to obtain the sharpness of the chromatographic peaks but could be avoided when a semi-wide bore column was used. The recovery from the same amount of the sample was better in PT than in HS but a larger sample volume in HS method could compensate the lower efficiency. Therefore PT is suitable to the analysis of drinking water where the very low concentration must be determined. HS is suitable to waste water analysis because of the easiness of the operation. The repeatability was good and similar in both methods. For the contamination of the former sample, both methods were tough and could be used without any problems. The matrix effect which could change the equilibrium parameters in HS method was find negligible in many components. The actual samples such as tap water and river water were analyzed with both methods concerning 16 components regulated in Korea.

• Communications for Statistical Applications and Methods
• /
• 제4권3호
• /
• pp.743-752
• /
• 1997

Kim (1985) proposed the so-called "centered balanced systematic sampling" for estimating the mean of a population with a linear trend. In this paper, a version of this sampling method is proposed. It is shown that this version is as efficient as the original method from the viewpoint of the expected mean square error criterion. It is also shown to be quite an efficient method as compared with other existing methods.g methods.

• Geomechanics and Engineering
• /
• 제16권1호
• /
• pp.21-34
• /
• 2018

Discontinuities considerably affect the mechanical and hydraulic properties of rock mass. These properties of the rock mass are influenced by the geometry of the discontinuities to a great extent. This paper aims to render an account of the geometrical parameters of several discontinuity sets related to the surrounding rock mass of Rudbar Lorestan Pumped Storage Power Plant powerhouse cavern making use of the linear and areal (circular and rectangular) sampling methods. Taking into consideration quite a large quantity of scanline and the window samplings used in this research, it was realized that the areal sampling methods are more time consuming and cost-effective than the linear methods. Having corrected the biases of the geometrical properties of the discontinuities, density (areal and volumetric) as well as the linear, areal and volumetric intensity accompanied by the other properties related to four sets of discontinuities were computed. There is an acceptable difference among the mean trace lengths measured using two linear and areal methods for the two joint sets. A 3D discrete fracture network generation code (3DFAM) has been developed to model the fracture network based on the mapped data. The code has been validated on the basis of numerous geometrical characteristics computed by use of the linear, areal sampling methods and volumetric method. Results of the linear sampling method have significant variations. So, the areal and volumetric methods are more efficient than the linear method and they are more appropriate for validation of 3D DFN (Discrete Fracture Network) codes.

• Communications for Statistical Applications and Methods
• /
• 제5권1호
• /
• pp.107-120
• /
• 1998

This research aims here to develop a certain extended double sampling plan, EDS, which is an extension of ordinary double sampling plan in the sense that the second-stage sampling effort and second-stage critical value are allowed to depend on the point at which the first-stage continuation region is traversed. For purpose of comparison, single sampling plan, optimal ordinary double sampling plan(ODS) and sequential probability ratio test are considered with the same overall error rates, respectively. It is observed that the EDS idea allows less sampling effort than the optimal ODS.

• 산업경영시스템학회지
• /
• 제24권63호
• /
• pp.33-43
• /
• 2001

To estimate the reliability of a large and complex network with a small variance, we propose two dynamic Monte Carlo sampling methods: the sequential minimal cut set (SMCS) and the sequential minimal path set (SMPS) methods. These methods do not require all minimal cut sets or path sets to be given in advance and do not simulate all arcs at each trial, which can decrease the valiance of network reliability. Based on the proposed methods, we develop the importance sampling estimators, the total hazard (or safety) estimator and the hazard (or safety) importance sampling estimator, and compare the performance of these simulation estimators. It is found that these estimators can significantly reduce the variance of the raw simulation estimator and the usual importance sampling estimator. Especially, the SMCS algorithm is very effective in case that the failure probabilities of arcs are low. On the contrary, the SMPS algorithm is effective in case that the success Probabilities of arcs are low.