• Water Engineering Research
• /
• v.3 no.1
• /
• pp.31-44
• /
• 2002

The effect of diurnal cycle, intermittent visit of observation satellite, sensor installation, partial coverage of remote sensing, heterogeneity of soil properties and precipitation to the soil moisture estimation error were analyzed to present the global sampling strategy of soil moisture. Three models, the theoretical soil moisture model, WGR model proposed Waymire of at. (1984) to generate rainfall, and Turning Band Method to generate two dimensional soil porosity, active soil depth and loss coefficient field were used to construct sufficient two-dimensional soil moisture data based on different scenarios. The sampling error is dominated by sampling interval and design scheme. The effect of heterogeneity of soil properties and rainfall to sampling error is smaller than that of temporal gap and spatial gap. Selecting a small sampling interval can dramatically reduce the sampling error generated by other factors such as heterogeneity of rainfall, soil properties, topography, and climatic conditions. If the annual mean of coverage portion is about 90%, the effect of partial coverage to sampling error can be disregarded. The water retention capacity of fields is very important in the sampling error. The smaller the water retention capacity of the field (small soil porosity and thin active soil depth), the greater the sampling error. These results indicate that the sampling error is very sensitive to water retention capacity. Block random installation gets more accurate data than random installation of soil moisture gages. The Walnut Gulch soil moisture data show that the diurnal variation of soil moisture causes sampling error between 1 and 4 % in daily estimation.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.15 no.4
• /
• pp.435-441
• /
• 2012

This paper provides simulation-based results of effect analysis of sample size and sampling periods on accuracy of reliability estimation methods using multiple comparisons with analysis of variance. Sum of squared errors in estimated reliability measures were evaluated through applying seven estimation methods for one-shot systems to simulated quantal-response data. Analysis of variance was implemented to investigate change in these errors according to variations of sample size and sampling periods for each estimation method, and then the effect analysis on accuracy in reliability estimation was performed using multiple comparisons based on sample size and sampling periods. An efficient way to allocate both sample size and sampling periods for reliability estimation tests of one-shot systems is proposed in this paper from the effect analysis results.

• Survey Research
• /
• v.6 no.2
• /
• pp.1-32
• /
• 2005

The accuracy of exit poll mainly depends on the sampling method of voting places. For exit poll, we propose a probability sampling method of selecting voting places as an alternative to the bellwether polling place sampling. Through an empirical study based on the 2004 general election data, the efficiency of the suggested systematic sampling from ordered voting places was evaluated in terms of mean prediction error and it turns out that the proposed sampling method outperformed the bellwether polling places sampling. We also calculated the variance of estimator from the proposed sampling, and considered the sample size problem to guarantee the target precision using the design effect of the proposed sample design.

• Nuclear Engineering and Technology
• /
• v.47 no.5
• /
• pp.546-558
• /
• 2015

Chord length sampling method in Monte Carlo simulations is a method used to model spherical particles with random sampling technique in a stochastic media. It has received attention due to the high calculation efficiency as well as user convenience; however, a technical issue regarding boundary effect has been noted. In this study, after analyzing the distribution characteristics of spherical particles using an explicit method, an alternative chord length sampling method is proposed. In addition, for modeling in finite media, a correction method of the boundary effect is proposed. Using the proposed method, sample probability distributions and relative errors were estimated and compared with those calculated by the explicit method. The results show that the reconstruction ability and modeling accuracy of the particle probability distribution with the proposed method were considerably high. Also, from the local packing fraction results, the proposed method can successfully solve the boundary effect problem. It is expected that the proposed method can contribute to the increasing of the modeling accuracy in stochastic media.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.16 no.1
• /
• pp.36-41
• /
• 2013

In this paper time series wave data are simulated using wave spectrum with random phases of the wave signal. The simulated wave signals are used to study the effect of the sampling rate on the ocean wave characteristics. Effect of sampling rate on wave data which include extreme wave such as freak waves are examined and various wave characteristics including abnormality index (AI), kurtosis of wave profile and maximum wave height are examined. Various wave heights are decreased as the sampling rate decreases. The zero-th moment of the wave spectrum does not affect much on the sampling rate but the second moment are greately affected on the sampling rate. The error due to the sampling rate is decreases as the wave period increases. The error in significant wave height based on the wave spectrum $H_s$ is smaller than that on the time domain method $H_{1/3}$. AI index and kurtosis of wave profile do not deviate much from the exact date as long as the sampling rate is greater than 1 Hz. Ocean wave measurement with the sampling frequency higher than 1 Hz will result the error less than 5% in estimating the height of extreme waves.

• Journal of Power Electronics
• /
• v.11 no.1
• /
• pp.59-63
• /
• 2011

This paper presents the modeling of the sampling effect in the p-type average current mode control. The prediction of the high frequency components near half of the switching frequency in the current loop gain is given for the p-type average current mode control. By the proposed model, the prediction accuracy is improved when compared to that of conventional models. The proposed method is applied to a buck converter, and then the measurement results are analyzed.

• Proceedings of the KSME Conference
• /
• 2000.04b
• /
• pp.404-409
• /
• 2000

Growth characteristics of silica particles have been studied experimentally using in situ sampling technique from $H_2/O_2TEOS$ diffusion flame with carefully devised sampling probe. Verification of sampling result was done through new method and effects of flame condition and TEOS flow rate on growth characteristics of silica particles were investigated. By comparing particles sampled by thermophoretic sampling in flame with those by collector sampling after probe, particles do not change before and after probe sampling, which was clearly proved from the fact that the result of TEM image analysis makes good agreement with that of SMPS measurement. As flame temperature increases, the effect of coalescence or sintering becomes important mechanism during growth of silica particles, resulting in canceling the effect of coagulation, which makes mean diameter of silica particles increase slowly. With increase in TEOS flow rate, the number concentration of generated silica particle increases but residence time of particles in flame decreases. As a result, there exists upper limit to which the diameter of silica particle increases under same flame condition.

• The Korean Journal of Applied Statistics
• /
• v.32 no.4
• /
• pp.643-652
• /
• 2019

We propose a method for sample size determination using design effect formulas when a sample is resigned for a repeated survey. The proposed method enables the determination of the sample size by incorporating the impact of various design components to the sampling error through design effect formulas that are applicable under multistage sampling design and stratified multistage sampling designs.

• Communications of the Korean Mathematical Society
• /
• v.13 no.1
• /
• pp.181-193
• /
• 1998

The Shannon sampling series is the prototype of an interpolating series or sampling series. Also the Shannon wavelet is one of the protypes of wavelets. But the coefficients of the Shannon sampling series are different function values at the point of discontinuity, we analyze the Gibbs phenomenon for the Shannon sampling series. We also find a way to go around this overshoot effect.

• East Asian Journal of Business Economics (EAJBE)
• /
• v.8 no.3
• /
• pp.37-42
• /
• 2020

Purpose - Research on the mechanism by which tasting affects the purchase of related products and related products is still insufficient. Therefore, it is necessary to make good use of marketing practically how tasting affects taste and leads to consumption behavior. Research design, data, and methodology - First, we provide tasting sampling for people with different impulsive purchasing tendencies and check whether this leads to purchasing behavior in the future. Second, it is necessary to measure 'face (or notion of courtesy)', which is a characteristic of Koreans, as a moderating variable for the effect of sampling. Third, it is proposed to look at how the effect of sampling appears differently over time. Results - First, it is necessary to pay attention to the factors influencing the sampling effect in the product group that cannot produce a tasting situation such as general food or beverage. Second, research results may not apply to all actual marketing. Conclusions - This study is judged to have contributed to resolving the question of whether the distribution store's tasting promotion is more effective and lasts longer than other promotions. It also suggested the possibility that the effect of tasting could be changed depending on whether the amount of tasting was limited or the subjects of tasting.