• The Journal of the Petrological Society of Korea
• /
• v.1 no.1
• /
• pp.1-24
• /
• 1992

Precambrian metamorphic rocks of the Gapyeong-Cheongpyeong area consist of banded gneiss, augen gneiss, leucocratic gneiss, quartz schist and quartzite, together with minor intercalations of serpentinite, amphibolite and marble. Mineral assemblages of meta-sedimentary rocks are classified into three types: sillimanite-free; sillimanite-bearing; and sillimanite+K-feldspar-bearing assemblages. Compositions of metamorphic phases depend on the type of mineral assemblages. In particular, the Ca contents of plagioclase and garnet are high in sillimanite-free assemblges. Kyanite occurs in three samples, and coexists with sillimanite in one sample. The presence of kyanite indicates that metamorphic rocks of the study area have experienced the Barrovian type metamorphism. Peak metamorphic conditions estimated from various geothermobarometers and phase equilibria are 618-674$^{\circ}C$ and 6.5${\pm}$2.0 kbar for sillimanite-free assemblages, and 701-740$^{\circ}C$ and 4.4${\pm}$0.8 kbar for sillimanite-bearing assemblages, respectively. Furthermore, a clockwise P-T-time path is deduced for the study area, based on the following observations: (1) the polymorphic transition of kyanite to sillimanite, (2) the occurrence of sillimanite and K-feldspar belonging to the upper amphibolite facies, and finally (3) the retrograde metamorphism characterized by muscovite-, chlorite-, and actinolite-bearing assemblages.

• Economic and Environmental Geology
• /
• v.53 no.6
• /
• pp.655-666
• /
• 2020

This study evaluated the characteristics of arsenic production in groundwater through microbial community analysis of groundwater contaminated with high arsenic in Haman area. Groundwater in Haman area is contaminated with arsenic in the range of 0-757.2 ㎍/L, which represents the highest arsenic contamination concentration reported in Korea as natural groundwater pollution source. Of the total 200 samples, 29 samples (14.5%) showed higher arsenic concentration than that of 10 ㎍/L, which is the standard for drinking water quality, and 8 samples (4%) found in wells with 80-100 m depth were above 50 ㎍/L. In addition, seven wells with arsenic concentration more than 100 ㎍/L located in the northern part of Haman. As a result of microbial community analysis for high arsenic-contaminated groundwater, the microbial community compositions were significantly different between each sample, and Proteobacteria was the most dominant phyla with an average of 61.5%. At the genus level, the Gallinonella genus was predominant with about 12.8% proportion, followed by the Acinetobacter and Methermicoccus genus with about 7.8 and 7.3%, respectively. It is expected that high arsenic groundwater in the study area was caused by a complex reaction of geochemical characteristics and biogeochemical processes. Therefore, it is expected that the constructed information on geochemical characteristics and microbial communities through this study could be used to identify the origin of high arsenic groundwater and the development of its controlling technology.

• Korean Journal of Mineralogy and Petrology
• /
• v.34 no.4
• /
• pp.277-291
• /
• 2021

A mineral phase contained in a rock sample can be categorized into several crystal populations with distinct origins and crystal growth histories. A detailed textural and mineralogical investigation on a clinopyroxene megacryst-bearing porphyritic dike with glassy chilled margins (tachylyte) in the southeastern Ulleung Island was conducted to decipher its crystal populations. During this study, we have measured glass and mineral major element compositions using electron microprobe analyzer. Tachylyte has a homogeneous trachyandesitic composition without any significant alteration characteristics, suggesting that its composition may represent the original melt composition of the dike. Clinopyroxene and plagioclase larger than 0.5 mm are antecrysts equilibrated with a more primitive melt composition than trachyandesitic tachylyte. Meanwhile, clinopyroxene and plagioclase microlites (<0.5mm) are regarded as primocrysts crystallized in-situ. According to our results, all clinopyroxenes in the Stage I Dodong Basalt are sectored into basal and prismatic parts, whose compositional ranges systematically vary: [Mg+Si+Fe]_basal ↔ [Al+Ti+Na]_prism. Therefore, we suggest that the effect of the elemental partitioning caused by the clinopyroxene sector zonation in Stage I volcanism should be considered in the future works.

• Economic and Environmental Geology
• /
• v.55 no.3
• /
• pp.281-293
• /
• 2022

We examined degradation characteristics of lead based pigments(white lead, Red lead, Litharge) according to atmospheric environmet condition, for example atmospheric gas(CO₂, NO₂) and soluble salt. Painted samples not changed material compositions but were occured the color change(𝚫E 4~31) after exposed UV irradiation. All sample were not affected by CO₂ gas not only color but chemical composition. However, samples were remakably changed color exposed NO₂ gas and it was formed secondary product like as lead nitrate. Such as red lead and white lead samples' color difference were 𝚫E 2 and 𝚫 10 respectively and became dark, along with litharge became bright and color difference was 𝚫E 5 after react with NO₂ gas. It confirm that NO₂ was influential factor than CO₂ in the case of same concentration. Furthermore salt spray test was taken to figure out soluble salt influence in fine dust. The result showed noticeable color change and secondary product was formed on samples' surface. The glue film peeled off or hole, and color changed around the secondary products. After salt spray, XRD pattern showed decrease peak intensity and lower crystalinity. As a result of salt spray test, white lead was formed new product litharge and litharge was formed litharge and minium. According to the results, influential atmospheric factors for conservation of paint pigments were UV, NO₂, soluble salt, and litharge was most weakness throughout lead base pigments.

• Economic and Environmental Geology
• /
• v.55 no.5
• /
• pp.447-463
• /
• 2022

The lime and clay that used in the construction of the Tomb of King Muryeong and the Royal Tombs in Gongju are auxiliary materials, and are used joint and plaster materials for the wall to play a role of structural support. In this study, the homogeneity between the tombs and material characteristics were interpreted through quantitative analysis of lime and clay. As a result of microtexture and composition analysis, almost the same minerals were identified in each sample groups, and similar characteristics were shown in thermal analysis. Geochemically, it is confirmed that the behavior characteristics are very similar regardless of the tombs. The compositions is also confirmed high homogeneity in the diagrams of CaO-MgO-SiO₂, RO₂-(RO+R₂O) correlations, A-CN-K and A-CNK-FM triangles. Therefore, it is interpreted that the clay used for the construction of the tomb complex was supplied from around area, and the raw materials of lime were produced using shell fragments of oyster family based on mainly composed of calcite. It is interpreted that the raw materials of lime were supplied from middens along the west coast of down the Geumgang river in Korean peninsula, but the consideration of the supply site, needs to be cross-validated through stable isotope analysis, use of carbonate rock and reproduction experiments.

• Applied Biological Chemistry
• /
• v.51 no.3
• /
• pp.238-244
• /
• 2008

The essential oil was obtained from the aerial part of Caryopteris incana Miq. by steam distillation, samples were collected by headspace (HS) and solid-phase microextraction (SPME) methods, and the compositions of the essential oil were analyzed by gas chromatography-mass spectrometry (GCMS). The fragrance of the essential oil was fougere and woody. There were sixty-nine constituents in the essential oil: 28 carbohydrates, 22 alcohols, 7 acetates, 7 ketones, 3 aldehydes, and 2 others. Major constituents were 4,6,6-trimethyl [1S-($1{\alpha},2{\beta},5{\alpha}$)]-bicyclo[3.1.1]hept-3-en-2-ol (11.8%), taucadinol (9.4%), myrtenyl acetate (9.2%), pinocarvone (7.0%), 1-hydroxy-1,7-dimethyl-4-isopropyl-2,7-cyclodecadiene (6.3%), ${\delta}$-3-carene (6.2%). By SPME extraction, forty-nine constituents were identified: 22 hydrocarbons, 16 alcohols, 6 acetates, 3 ketones, and 2 ethers. Major constituents of the SPME-extracted sample were ${\delta}$-3-carene (12.6%), (-)-myrtenyl acetate (11.2%), 6,6-dimethyl-2-methylene-bicycol [3.1.1] heptan-3-o1 (10.9%), pinocarvone (9.3%). By HS extraction, ten constituents were identified: 5 hydrocarbons, 2 amines, 1 alcohol, and 2 others. Major constituents of the HS-extracted sample were (Z)-2-fluoro-2-butene (34.9%), ${\delta}$-3-carene (6.9%), 6-(4-chlorophenul)tetrahydro-2-methyl-2H-1,2-oxazine (5.9%). The $IC_{50}$ value (0.011 ${\mu}g/mg$) in MTT assay using HaCaT keratinocyte cell line was lower than those of commercially-selling rosemary and tea tree, suggesting more toxicological studies are needed for commercial use of the essential oil of Caryopteris incana Miq.

• Journal of the Mineralogical Society of Korea
• /
• v.19 no.2 s.48
• /
• pp.71-80
• /
• 2006

We examined the mineralogical composition of pyrite-bearing rocks by quantitative powder X-ray diffraction analysis using the matrix-flushing method and ROCKJOCK (a full pattern fitting computer program). The neutralization potential (NP) and acid generating potential (AP) were calculated on the basis of mineralogical compositions. The mineralogical AP was compared with the conventional AP calculated from bulk sulfur concentration to assess the applicability to the prediction of acid rock drainage(ARD). The pyrite content calculated by matrix-flushing method showed a high positive correlation($r^2$=0.95) with those by ROCKJOCK. The pyrite contents by matrix-flushing method was 1.45 times larger than those by ROCKJOCK. The pyrite content and mineralogical AP obtained by the matrix-flushing method had a better correlation($r^2$=0.98) with those by the total sulfur concentrations in the all samples except KB sample. The mineralogical NPs of YJ sample were 23.0 and 34.0(kg $CaCO_3$ equivalent per tonne) by matrix-flushing method and ROCKJOCK, respectively. The AP calculated by matrix-flushing method and ROCKJOCK program were 47% and 72% of those by the conventional ABA test. We hereby suggested that the quantitative analysis using XRD data can be applied to prediction of ARD. For more reliable calculation of the mineralogical NP and AP, other sulfide and carbonate minerals such as pyrrhotite, dolomite, ankerite, siderite, rhodochrosite which can affact the mineralogical NP and AP should be considered.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.45 no.3
• /
• pp.386-395
• /
• 2016

To develop a functional fermentation food from Rubus coreanus Miquel (Bokbunja) and chlorella mixtures, optimal lactic acid fermentation conditions were established, and quality properties based on physicochemical evaluation such as chemical compositions, free sugars, organic acids, and antibacterial activities were investigated. Regarding optimal fermentation strain selection, formation of lactic acid was best in Lactobacillus plantarum among the experimental strains (10 kinds), and the optimal fermentation temperature was $37^{\circ}C$. In addition, overall acceptability in the sensory evaluation was highest in the 5% chlorella mixture sample. Therefore, quality properties of the prepared sample under the established optimal fermentation conditions were investigated. Moisture, total sugar (dry basis), crude fiber (dry basis), and pH of fermented Rubus coreanus Miquel juice (RCM) with 5% chlorella mixture (RCM-C5) were reduced by 4.90%, 14.15%, and 0.32%, respectively, as compared with non-fermented RCM. Meanwhile, crude protein, crude fat, and crude ash (dry basis) of RCM-C5 were elevated by 13.75%, 0.18%, and 0.73%, respectively, as compared with RCM. The yellowness (b value) of color values was greater in RCM-C5 compared to RCM. The free sugar and organic acid contents of RCM-C5 were elevated by 0.97% and 616.30 mg%, respectively, as compared with RCM. In addition, the gram positive bacterium Staphylococcus aureus was elevated by 5.83% while gram negative bacteria Escherichia coli and Salmonella Typhimurium were elevated by 2.94% and 4.67%, respectively, as compared with RCM. In conclusion, the quality properties of RCM and chlorella lactic acid fermentation mixtures were improved compared with the general RCM product. Consequently, it is possible to apply fermented RCM as a functional fermentation food.

• Korean Journal of Heritage: History & Science
• /
• v.44 no.3
• /
• pp.112-131
• /
• 2011

This article reports the results of scientific analysis using SEM-EDX, XRD, TG/DTA, performed on 5 green glaze samples of the brick and roofing tile excavated from the Sacheonwang temple site in Gyeongju in order to verify the chemical compositions and melting temperature. The glaze samples on 2 clay statues have similar chemical composition (PbO 74~81%, $SiO_2$ 14~18%) and melting temperature range ($970{\sim}1070^{\circ}C$), whereas the 2 tiles of goblin's face and 1 rhomb brick have different characteristics. Sample SC 003 (made of PbO 63~67%, $SiO_2$ 25~28%), one of the tiles of goblin's face, shows low melting temperature range (below $970^{\circ}C$), and sample SC 004 (composed of PbO 64~70%, $SiO_2$ 19~25% and melting point $970{\sim}1070^{\circ}C$), the other tile of goblin's face, shows different chemical characteristics compared with 2 clay statues. The green glaze on rhomb brick shows different composition compared with all the others from Sacheonwang temple site in that it does not show any impurity elements other than the main components (PbO 87~88%, $SiO_2$ 12~13%) with very low melting temperature range ($750{\sim}770^{\circ}C$). Surprizingly, the chemical and optical characteristics of this green-glaze on rhomb brick are very similar to that on the bricks from Yeongmyo temple site, Gyeongju. The above results indicate that raw material and manufacturing method are not same for 5 green-glaze samples from Sacheonwang temple site and therefore suggests that further study on the provenance of raw material such as lead isotope analysis is necessary. Our work will provide basic data for future reproduction study of green glazed brick of Sacheonwang temple site, Gyeongju and will also serve as a reference data for the study of raw material and manufacturing method of green glaze from other sites of cultural assets.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.21 no.1
• /
• pp.36-42
• /
• 1992

The lipid compositions of total lipid extracted from the flesh divided into albinic type and melanic type of culture shellfishes, i.e. Achatina fucica Bowdich, Ampullarius insularus were compared. Total lipid contents of shellfishes were $1.11{\sim}3.25%$, the levels were appeared higher in Ampullarius insularus than Achatina fucica Bowdich, and in albinic type than melanic type. It was found that the contents of neutral lipids $(31.79{\sim}40.60%)$ and phospholipids $(50.95{\sim}62.12%)$ were high, while that of glycolipids $(4.84{\sim}9.47%)$ were low. The major fatty acids in total lipid of each sample were $C_{18:2}(11.92{\sim}14.37%)$, $C_{18:1}(12.34{\sim}13.64%)$, $C_{20:4}(11.03{\sim}13.74%)$, $C_{16:0}(7.45{\sim}15.39%)$ and $C_{18:0}(7.34{\sim}11.80%)$ and additionally $C_{20:2}(9.62{\sim}10.19%)$ in Achatina fucica Bowdich, and the major fatty acid composition in total lipids of each sample showed no significant differences between albinic type and melanic type, respectively. Particularly the content of $C_{16:0}$ in total lipids was shown more abundant in Ampullarius insularus and that of $C_{18:0}$, C_{20:2}$ in Achatina fucica Bowdich. The content of polyene acids in total lipids occupied higher level in Achatina fucica Bowdich but $C_{22:6}$ was almost detected, and observed relatively higher amounts in Ampullarius insularus. The main fatty acids in neutral lipid of Achatina fucica Bowdich were $C_{18:2}(16.80{\sim}17.74%)$, $C_{20:2}(12.15{\sim}12.59%)$, $C_{18:1}(9.79{\sim}10.37%)$, $C_{18:0}(7.71{\sim}12.43%)$ and C_{16:0},\;C_{20:4}$ and additionally $C_{18:3} (20.90%)$ was shown predominant in melanic type and the level of polyene acid highest in neutral lipids. The neutral lipids in each type of Ampullarius insularus were mainly composed of $C_{16:0}(16.96{\sim}17.46%)$, $C_{18:1}(13.79{\sim}13.95%)$ and $C_{18:2} (12.90{\sim}15.70%)$ and additionally it chiefly consisted of $C_{18:1}$, $C_{20:4}$and$C_{22:6}$. The major fatty acids in each type of glycolipids were $C_{18:2}(19.01{\sim}19.72)$, $C_{16:0}(12.89{\sim}18.76%)$ and $C_{18:0}(12.68{\sim}17.52%)$ and additionally $C_{18:1}$ in Achatina fucica Bowdich, but $C_{22:1}$ was detected in relatively higher level by 6.95% in albinic type only. The major fatty acids in glycolipids were $C_{18:2}(12.46{\sim}18.21%)$, $C_{16:0}(10.43{\sim}18.48%)$, $C_{20:1}(10.51{\sim}14.59%)$, $C_{20:4}(8.24{\sim}12.34%)$ and additionally it chiefly consisted of $C_{18:0}\;and\;C_{18:1}$ in Ampullarius insularus. The fatty acid composition in phospholipids of each sample was very resembled to total lipids, respectively.