• Journal of the Korean Physical Society
• /
• v.73 no.11
• /
• pp.1604-1611
• /
• 2018

Utilizing Sb-based bulk epilayers on large-scale low-cost substrates such as GaAs for fabricating infrared (IR) photodetectors is presently attracting significant attention worldwide. For this study, three sample series of $GaAs_xSb_{1-x}$, $In_{1-x}Ga_xSb$, and $InAs_xSb_{1-x}$ with different compositions were grown on semi-insulating GaAs substrates by using molecular beam epitaxy (MBE) and appropriate InAs quantum dots (QDs) as a defect-reduction buffer layer. Photoluminescence (PL) signals from these samples were observed over a wide IR wavelength range from $2{\mu}m$ to $12{\mu}m$ in agreement with the expected bandgap, including bowing effects. In particular, interband PL signals from $InAs_xSb_{1-x}$ and $In_{1-x}Ga_xSb$ samples even at room temperature show promising potential for IR photodetector applications.

• Journal of Powder Materials
• /
• v.29 no.5
• /
• pp.357-362
• /
• 2022

The low-temperature sinterability of TiO₂-CuO systems was investigated using a solid solution of SnO₂. Sample powders were prepared through conventional ball milling of mixed raw powders. With the SnO₂ content, the compositions of the samples were Ti_1-xSn_xO₂-CuO(2 wt.%) in the range of x ≤ 0.08. Compared with the samples without SnO₂ addition, the densification was enhanced when the samples were sintered at 900℃. The dominant mass transport mechanism seemed to be grain-boundary diffusion during heat treatment at 900℃, where active grain-boundary diffusion was responsible for the improved densification. The rapid grain growth featured by activated sintering was also obstructed with the addition of SnO₂. This suggested that both CuO as an activator and SnO₂ dopant synergistically reduced the sintering temperature of TiO₂.

• Journal of Astronomy and Space Sciences
• /
• v.41 no.2
• /
• pp.79-85
• /
• 2024

Nowadays, the trend in lunar exploration missions is shifting from prospecting lunar surface to utilizing in-situ resources and establishing sustainable bridgehead. In the past, experiments were mainly focused on rover maneuvers and equipment operations. But the current shift in trend requires more complex experiments that includes preparations for resource extraction, space construction and even space agriculture. To achieve that, the experiment requires a sophisticated simulation of the lunar environment, but we are not yet prepared for this. Particularly, in the case of lunar regolith simulants, precise physical and chemical composition with a rapid development speed rate that allows different terrains to be simulated is required. However, existing lunar regolith simulants, designed for 20th-century exploration paradigms, are not sufficient to meet the requirements of modern space exploration. In order to prepare for the latest trends in space exploration, it is necessary to innovate the methodology for producing simulants. In this study, the basic framework for lunar regolith simulant development was established to realize this goal. The framework not only has a sample database and a database of potential simulation target compositions, but also has a built-in function to automatically calculate the optimal material mixing ratio through the particle swarm optimization algorithm to reproduce the target simulation, enabling fast and accurate simulant development. Using this framework, we anticipate a more agile response to the evolving needs toward simulants for space exploration.

• Korean Journal of Materials Research
• /
• v.34 no.9
• /
• pp.432-438
• /
• 2024

Cu-Ti thin films were fabricated using a combinatorial sputtering system to realize highly sensitive surface acoustic wave (SAW) devices. The Cu-Ti sample library was grown with various chemical compositions and electrical resistivity, providing important information for selecting the most suitable materials for SAW devices. Considering that acoustic waves generated from piezoelectric materials are significantly affected by the resistivity and density of interdigital transducer (IDT) electrodes, three types of Cu-Ti thin films with different Cu contents were fabricated. The thickness of the Cu-Ti thin films used in the SAW-IDT electrode was fixed at 150 nm. As the Cu content of the Cu-Ti films was increased from 31.2 to 71.3 at%, the resistivity decreased from 10.5 to 5.8 × 10^-5 ohm-cm, and the density increased from 5.5 to 7.3 g/cm³, respectively. A SAW device composed of Cu-Ti IDT electrodes resonated at exactly 143 MHz without frequency shifts, but the full width at half maximum (FWHM) values of the resonant frequency gradually increased as the Cu content increased. This means that although the increase in Cu content in the Cu-Ti thin film helps to improve the electrical properties of the IDT electrode, the increased density of the IDT electrode deteriorates the acoustic performance of SAW devices.

• Journal of Sensor Science and Technology
• /
• v.33 no.5
• /
• pp.353-358
• /
• 2024

Al-Ni thin films were fabricated using combinatorial sputtering system to realize highly sensitive surface acoustic wave (SAW) devices. The Al-Ni sample library was grown with various chemical compositions and electrical resistivities, which provided important information for selecting the most suitable materials for SAW devices. As acoustic waves generated from piezoelectric materials are significantly affected by the resistivity and density of the interdigital transducer (IDT) electrodes, three types of Al-Ni thin films with different Al contents were fabricated. The thickness of the Al-Ni thin film used in the SAW-IDT electrode was fixed at 100 nm. As the Al content of the Al-Ni film decreased from 79.2 to 24.5 at%, the resistivity increased slightly from 4.8 to 5.8 × 10^-5 Ω-cm, whereas the calculated density increased significantly from 3.6 to 6.9 g/cm³. The SAW device composed of Al-Ni IDT electrodes resonated at 71 MHz without frequency shifts; however, the selectivity of the resonant frequency and insertion loss deteriorated as the Al content decreased. When there is no significant difference in the electrical characteristics of the SAW-IDT electrodes, the performance of the SAW devices can be determined by the density of the IDT electrodes.

• Journal of the Mineralogical Society of Korea
• /
• v.22 no.4
• /
• pp.395-405
• /
• 2009

The maturity of amber matrix and inclusion was studied to explore the effect of heat treatment on the formation of the sun spangle in the transparent Baltic amber from Gdansk, Poland. Optical microscope revealed two types of inclusions in the original amber samples. The inclusions in the amber which had sun spangle were dramatically expanded by the heat treatment, comparing to those without sun spangle which contains fissure and shows different refractive index. The amber sample which didn't show sun spangle after the heat treatment showed a strong carbon related peak in TOF-SIMS spectra and weak oxygen related peak. it means that the maturity of this amber sample is comparatively higher than the one with spangle. The two amber samples show similar IR spectra before the heat treatment. However, the amber which had sun spangle exhibited an additional 1019 $cm^{-1}$ absorption peak and a more intense 887 $cm^{-1}$ peak. The different chemical compositions between the two types of amber is believed to be due to the different absorption spectra between 1000~600 $cm^{-1}$. According to the study of DSC analysis, the two samples show different DSC profiles. Although they have the same geological origin, their geological ages are different and have different chemical compositions. Thus, they exhibited different behavior after the heat treatment. The formation of sun spangle seemed to depend on the difference in the heat expansion rate of amber matrix with different maturity and chemical compositions.

• Asian-Australasian Journal of Animal Sciences
• /
• v.11 no.3
• /
• pp.277-284
• /
• 1998

This experiment was carried out to study the effects of lactic acid bacteria (LAB) inoculation and addition of cell wall degrading enzymes on the fermentation characteristics and chemical compositions of Italian ryegrass silage. An inoculant LAB with or without a cell wall degrading enzyme of Acremoniumcellulase (A), or Meicellulase (M) or a mixture of both (AM), was applied to 1 kg of fresh Italian ryegrass sample. The treatments were control untreated, LAB-treated (application rate $10^5$ cfu/g fresh sample), LAB+A 0.005%, LAB + A 0.01%, LAB+A 0.02%, LAB + M 0.005%, LAB + M 0.01%, LAB + M 0.02%, LAB+AM 0.005%, LAB + AM 0.01% and LAB+AM 0.02%. The sample was ensiled into 2-L vinyl bottle silo, with 9 silages of each treatment were made (a total of 99 silages). Three silages of each treatment were incubated at 20, 30 and $40{^{\circ}C}$ for an approximately 2-months storage period. All silages were well preserved as evidenced by their low pH values (3.79-4.20) and high lactic acid concentrations (7.71-11.34% DM). The fermentation quality and chemical composition of the control untreated and the LAB-treated silages were similar, except that for volatile basic nitrogen (VBN) content was lower (p < 0.05) in the LAB-treated silages. LAB + cellulase treatments improved the fermentation quality of silages by decreasing (p < 0.01) pH values and increasing (p<0.01) lactic acid concentrations, in all of cellulase types and incubation temperatures. Increasing amount of cellulase addition resulted in further decrease (p < 0.01) of pH value and increases (p < 0.01) of lactic acid and residual water soluble carbohydrate (WSC) concentrations. LAB + cellulase treatments reduced (p<0.01) NDF, ADF, hemicellulose and cellulose contents of silages compared with both the control untreated and LAB-treated silages. LAB + cellulase treatments did not affect the silage digestibility due to fact of in vitro dry matter digestibility (IVDMD) was similar in all silages. The silages treated with cellulase A resulted in a better fermentation quality and a higher rate of cell wall reduction losses than those of the silages treated with cellulases M and AM. Incubation temperature of $30{^{\circ}C}$ seemed to be more suitable for the fermentation of Italian ryegrass silages than those of 20 and $40{^{\circ}C}$.

• Applied Biological Chemistry
• /
• v.39 no.4
• /
• pp.268-273
• /
• 1996

Fundamental data for new type of product development from Lycii fructus was experimentally determined. The chemical composition, and Hunter value changes, optimum extraction, volatile components of extract under different extraction conditions and heat treatment were mainly studied. Results are summarized as follows. The proximate compositions of dried Lycii fructus were water 21.8%, total sugar 27.6%, reducing sugar 15.2%, crude protein 14.29%, crude fat 5.65%, crude fiber 7.48%, and ash 7.98% in percent stale, respectively. Extracted yield on the basic of solid extract was getting increased when more solvent was used for extraction. The most recommendable extraction was 1 to 10 part of sample to solvent ratio. When water was employed as extraction solvent, the highest amount of solid extract was obtained. Extract of Lycii fructus in terms of yields and color was most acceptable when raw sample was treated 8 minute roasting at $180^{\circ}C$ and 60 minute heating at $120^{\circ}C$, respectively. Major volatile components of fresh Lycii fructus were to hexadecanoic acid, methyl linoleate, benzyl alcohol, dimetane benzene by GC/MS. By the roasting of raw sample, the compounds of 2-methyl-2buthenal, 1,4-dimethyl benzene, and benzyl alcohol were reduced. Wheras, methyl thiopropanol, benzene acetaldehyde and ethyl linoleate were slightly increased.

• Korean Chemical Engineering Research
• /
• v.48 no.6
• /
• pp.741-746
• /
• 2010

Phospholipids were recovered from squid viscera residues by ethanol extraction after supercritical carbon dioxide($SCO_2$) extraction and from squid viscera was not processed $SCO_2$ by various organic solvent extraction. $SCO_2$ extraction were performed at $45^{\circ}C$ and 20 MPa for removal of non polar lipid molecules from freeze dried squid viscera sample. Phospholipids were extracted from freeze dried squid viscera sample by chloroform, hexane, methanol, and ethanol and from $SCO_2$extracted squid viscera sample by ethanol. The pH was fixed at 5.7 for all phospholipids extraction conditions. Phospholipid classes were analyzed by HPLC equipped with evaporative light scattering detector (ELSD). Phosphatidyl choline(PC) extracted by ethanol from $SCO_2$ extracted residues was higher than that of extracted by ethanol from squid viscera. But phosphatidyl ethanolamine(PE) and phosphatidic acid(PA) were extracted higher percentage in raw squid viscera. The fatty acid compositions in phospholipids extract by ethanol extract from $SCO_2$ extracted residues were analyzed by gas chromatography(GC). Docosahexanoic acid(DHA) was found in highest percentage in phospholipid extract.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.15 no.1
• /
• pp.59-73
• /
• 1982

Differences of lipids, especially total lipid composition, fatty acid and sterol composition of the flesh lipids between three species of cephalopods were investigated, since available researches concerning lipids in flesh tissues of the cephalopod are very limited. Extracted total lipid from the flesh tissues were fractionated by silicic acid column chromatography into three lipid classes of neutral lipids, glycolipids and phospholipids. The lipid compositions of total lipid and neutral lipids were estimated by the method of thin layer chromatography and TLC-scanner. The sterol compositions of unsaponifiable matters from total lipid were determined by using thin layer chromatography and gas-liquid chromatography. The fatty acid composition of each lipid class was also determined by gas-liquid chromatography. Total lipid contents of flesh tissues from three species of the cephalopods were 0.5 in Octopus vulgare, 0.8 in Octopus variabilis and $0.6\%$ in Loligo beka based on wet weight, the contents of total fatty acid in total lipid were 19.3, 47.8 and $38.4\%$, and the contents of unsaponifiable matters were 10.9, 18.8 and $41.1\%$, respectively. Total lipid was mainly composed of sterols and polar lipid-pigments as major components in each sample and the proportion of sterols and polar lipid-pigments to total lipid ranged from 27.0 to $35.5\%$ and 38.3 to $63.4\%$, respectively. The other lipid components of total lipid, e.g. triglycerides, free fatty acids, and carbohydrate-esterified sterols were determined as a minor components. The major component fatty acid in total lipid was palmitic acid and additionaly it chiefly consisted of the other unsaturated acids such as oleic, linoleic, octadecatetraenoic and eicosapentaenoic acid as major components of the acid. The compositions of sterol in three species of cephalopod were found to contain mainly cholesterol for its proportion to total sterols was 82.4 to $89.1\%$. However the other sterols such as 22-dehydrocholesterol and 24-methylenecholesterol were determined in addition to cholesterol as a minor components. The result of fractional composition of lipid class in total lipid was that total lipid had large .amount of polar lipid and small amount of nonpolar lipid i, e, neutral lipid in each sample, and the contents of phospholipid were higher than that of glycolipid in polar lipid. Neutral lipid was mainly composed of free sterol as major components in each sample and its proportion of free sterols to total neutral lipid was 50.0 to $70.5\%$. The other lipid components of neutral lipid showing similar in quantity, esterified sterols, free fatty acids and triglycerides were determined as a minor components. The major components fatty acid in neutral lipid were palmitic, oleic and hexadecadienoic acid. Palmitic acid was the most abundant and additionaly oleic, linoleic, octadecatetraenoic and myristic acid were the major component fatty acid in glycolipid. But, especially, glycolipid of Loligo beka contained a higher amount of arachidonic acid which also consists of major component in addition to those of acids. Palmitic acid was the most abundant and additionaly, oleic, linoleic and octadecatetraenoic acid were the major component fatty acids in phospholipid.