• Journal of Korean Society of Forest Science
• /
• v.100 no.2
• /
• pp.226-231
• /
• 2011

Ulmus davidiana var. japonica is a deciduous tree species used for traditional medicine. This study was conducted to investigate the variation of samara, seed, germination and growth characteristics among populations and among individuals within five natural populations of U. davidiana var. japonica distributed in Korea. The ten characteristics of samara and seed, the three germination behaviors as well as the two growth traits were studied in samaras collected from total 32 trees. Statistical analysis of all characteristics showed that there were significant differences among populations as well as among individuals within populations. In this study, the mean characteristics of this species were 13.0 mm in samara length, 9.7 mm in samara width, 1.37 in samara index, 0.015 g in samara weight, 3.07 mm in samara stalk length, 3.85 seed length, 2.66 mm in seed width, 1.46 in seed index, 1.29 mm seed thickness, 0.0062 g in seed weigh, 34.8% in germination percentage, 8.6 days in mean germination time, 3.5 ea./day in gemination rate, 37.7 cm in height and 4.90 mm in root collar diameter. Especially, coefficients of variations in samara weight, germination percentage, germination rate, height and root collar diameter were relatively high (${\geq}30.0%$) compared to other traits. There was no significant relationship between population association and geographical distribution. The results of principal component analysis for 15 characteristics showed that primary four principal components (PC's) explained 100% of the total variation. The first PC accounted for 41.8% of the variability which correlated with morphological traits, the second PC accounted for 32.9% of the variability which correlated with germination behaviors and the third PC accounted for 16.3% of the variability which correlated with growth traits.

• Structural Engineering and Mechanics
• /
• v.58 no.4
• /
• pp.677-687
• /
• 2016

On the basis of the energy approach it is reported a development of the yield function and the constitutive equations for the orthotropic material with consideration of the crystal lattice constants and parameters of the crystallographic texture for the general stress state. For practical use in sheet metal forming analysis it is considered different loading scenarios: plane stress and plane strain states. Using the proposed yield function, the influence of single ideal components on the shape of yield surface was analyzed. The six texture components investigated here were cube, Goss, copper, brass, S and rotated cube, as these components are typically observed in rolled sheets from FCC alloys.

• Korean Journal of Environment and Ecology
• /
• v.26 no.4
• /
• pp.588-592
• /
• 2012

To examine the reason of empty samara production of Chinese elm, Ulmus parviflora, twenty two planted trees in Wonju-si were monitered for three years in terms of their flowering, pollinatiom system and samara characteristics. Inflorescences with bisexual flowers of Chinese elm are developed in the leaf axils on the twigs. Dichogamous flowers are varied with protogynuous and protandrous flower, and stamens in some bisexual flowers are developed in seperated time on a inflorescence or a tree. It is revealed newly that the flower of Chinese elm is out-crossed and partially insect(Apis mellifera) pollinated. The ratios of sound samara are significantly differed among years, the heighest values 65.5% were shown in 2009, lowered 42.9% in 2010, and the lowest 37.5% in 2011. This result might be affected by mean daily precipitation and number of rainy days during the flowering date, and lower temperature during the floral initiation stage, especially in 2011. These findings suggest that Chinese elm has self-incompatibility strategy and much pollination failure resulted in a production of much empty samaras. Further researches on the empty-seed production strategies and pollination system of major tree species might be needed.

• Korean Journal of Environment and Ecology
• /
• v.28 no.1
• /
• pp.55-61
• /
• 2014

To examine the forest structure and variation of samara and leaf shape of Acer pictum subsp. mono (APSM), We investigated forest structure and samara angles and length, and leaf shape in three natural population of APSM in Yanggu-gun, Youngyang-gun and Kwangyang-si from June 2012 to October 2013. Mean importance percentage (MIP) of APSM is shown lower values in Yanggu 19.8%, in Youngyang 22.0%, and in Kwangyang 17.1%, respectively. In middle layer, importance percentage (IP) of APSM is shown lower values than that of Acer pseudosieboldianum and Carpinus cordata. In lower layer, importance percentage (IP) of APSM is shown lower values in Yanggu 1.8%, in Youngyang 1.9%, and in Kwangyang 0.0%, respectively. From these results, MIP of APSM in natural population might be reduced in future. Angles between wings and samara length are significantly different between districts. APSM with seven palmate vein leaf are distributed more frequently at Kwangyang and Youngyang than Yanggu. Percentages of biserrate leaf is shown in Yanggu 0.6%, in Youngyang 15.8%, and in Kwangyang 20.4%, respectively. These results implies genetic variation in natural APSM population and further studies on the genetic variation analysis in natuel population of APSM should be needed.

• Korean Journal of Environment and Ecology
• /
• v.27 no.1
• /
• pp.64-70
• /
• 2013

To examine the proportion of secondary seed dispersion by wildlife and to identify the related wildlife, We measured seed removal rates and related wildlife at the natural mixed broadleaved forest in mountain Jungwang, Pyeungchang-gun in middle part of Korean peninsula, seed-tray contained four kind of tree seeds were setted from mid-september to late-October for three years. Mean seed removal rates(MSRR) of acorn(Q. mongolica)is shown the highest values 87.2%, next MSRR of samara(A. pseudosieboldianum) does 33.1%, MSRR of samara(A. pictum subsp. mono) does 29.2%. and then SRR of samara(A. mandshuricum) does only 13.6%. Acorns are removed more faster than samaras. Among the related wildlife, Siberian chipmunks most freqently visit seed tray, and ordered Korean squirrel, Wild boar, and Yellow-throated marten. Most secondary dispersed acorns might be consumed by Wild boar, and small portions does comsumed or scatter-hoarded by rodents. Most secondary dispersed samaras might be consumed by rodents, and small portions does scatter-hoarded by rodents. A few sound seeds are remained on the forest floor in late October owing to the seed consunption and seed hoarding by wildlife. We observe seedling establishment of four broadleaved tree species. From these results, We proved Wild boar is seed comsummer, and rodents are seed consummer and seed disperser. Further studies on secondary seed dispersion, seed consumption and hoarding and related wildlife should be needed.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.6
• /
• pp.1891-1894
• /
• 2013

• Analytical Science and Technology
• /
• v.37 no.5
• /
• pp.261-270
• /
• 2024

This study examines portable Gas Chromatography (GC) for the quantitative analysis of oxygen and impurities, focusing on the development and validation of a method to determine oxygen, carbon monoxide, carbon dioxide, methane, and nitrogen in medical compressed oxygen gas. The goal is to ensure the quality of medicalgrade oxygen. The method's validation assessed its metrological characteristics, demonstrating specificity through clear chromatographic separation of the target gases and the absence of these peaks in the carrier gas chromatogram. It exhibited linearity within the designated concentration ranges, while precision met permissible standards, with the relative standard deviation for intermediate precision being less than 4% for carbon monoxide (0.00025 - 0.00099 %), less than 3 % for methane (0.0005 - 0.00246%) and carbon dioxide (0.0050 - 0.0150 %), less than 2% for nitrogen (0.1 - 0.7 %), and less than 0.01% for oxygen (99.27 - 99.98%). Overall, the validation results confirm the suitability of this analytical method for the quantitative determination of the aforementioned gases in medical compressed oxygen using portable GC with microchromatographic columns and detectors.

• Journal of applied mathematics & informatics
• /
• v.14 no.1_2
• /
• pp.251-266
• /
• 2004

We consider a controlled nonlinear mechanical system described by the Lagrange equations. We determine the control forces $Q_1$ and the restrictions for the perturbations $Q_2$ acting on the mechanical system which allow to guarantee the asymptotic stability of the program motion of the system. We solve the problem of stabilization by the direct Lyapunov's method and the method of limiting functions and systems. In this case we can use the Lyapunov's functions having nonpositive derivatives. The following examples are considered: stabilization of program motions of mathematical pendulum with moving point of suspension and stabilization of program motions of rigid body with fixed point.

• Archives of design research
• /
• v.4 no.1
• /
• pp.7-30
• /
• 1991

From the past to the future, the great nature has been long standing good text and has never been behind the fashion. All problems of human being had been occured and been solved by 'Lives' and the biological chemistry ststem which are inside the nature. They say that "Ecology is the applications of biological shape in man made system design." We should find out the basic principles of nature and apply to the necessity of study. Biology, Ecology, and the other relational theory of design have abundant sources of idea in which designers can take new policy and creativities. When designers design new products they should consider socialogy and psychological circumstances that are related to them, and should find out various possibilities trying to contact biological systems and ecological systems which are chosen in the nature. The seed of ash samara can be applied to firehydrant for mountain on fire and application of the spider's web can lead to the device for road work. As soon as possible, we should find out the methods introducing the nautre which supplies infinite sources of idea to the basic theory of design.of design.

• Structural Engineering and Mechanics
• /
• v.58 no.4
• /
• pp.641-659
• /
• 2016

This paper deals with the pure bending of incompressible elastic perfectly plastic two-layer sheets under plane strain conditions at large strains. Each layer is classified by its yield stress, shear modulus of elasticity and its initial percentage thickness in relation to the whole sheet. The solution found is semi-analytic. In particular, a numerical technique is only necessary to solve transcendental equations. The general solution is cumbersome because different analytic expressions for the radial and circumferential stresses should be adopted in different regions of the whole sheet. In particular, there are several alternative ways a plastic region (or plastic regions) can propagate. However, for any given set of material and process parameters the solution to the problem consists of a sequence of rather simple analytic expressions connected by transcendental equations. The general solution is illustrated by a simple example.