• 방사성폐기물학회지
• /
• 제21권1호
• /
• pp.23-41
• /
• 2023

Coupled thermo-hydraulic-mechanical (THM) processes are essential for the long-term performance of deep geological disposal of high-level radioactive waste. In this study, a numerical sensitivity analysis was performed to analyze the effect of rock properties on THM responses after the execution of the heater test at the Kamaishi mine in Japan. The TOUGH-FLAC simulator was applied for the numerical simulation assuming a continuum model for coupled THM analysis. The rock properties included in the sensitivity study were the Young's modulus, permeability, thermal conductivity, and thermal expansion coefficients of crystalline rock, rock salt, and clay. The responses, i.e., temperature, water content, displacement, and stress, were measured at monitoring points in the buffer and near-field rock mass during the simulations. The thermal conductivity had an overarching impact on THM responses. The influence of Young's modulus was evident in the mechanical behavior, whereas that of permeability was noticed through the change in the temperature and water content. The difference in the THM responses of the three rock type models implies the importance of the appropriate characterization of rock mass properties with regard to the performance assessment of the deep geological disposal of high-level radioactive waste.

• BMB Reports
• /
• 제41권6호
• /
• pp.448-454
• /
• 2008

Two full-length cDNAs, PutPMP3-1 and PutPMP3-2, encoding PMP3 family proteins were isolated from Puccinellia tenuiflora, a monocotyledonous halophyte. Expression of both genes was induced by low temperature, salt stress, dehydration, ABA, and $NaHCO_3$. Transcripts of PutPMP3-2 were more strongly induced by these stresses relative to those of PutPMP3-1, particularly under low temperature and dehydration conditions. Expression of PutPMP3-1 and PutPMP3-2 in yeast mutants lacking the PMP3 gene can functionally complement the membrane hyper-polarization and salt sensitivity phenotypes resulting from PMP3 deletion. To compare the functions of PutPMP3-1 and PutPMP3-2, the orthologous genes in rice (OsLti6a and OsLti6b) were isolated. Both OsLti6a and OsLti6b could functionally complement the loss of PMP3 in yeast. PutPMP3-2 and OsLti6a were more effective in reversing membrane hyperpolarization than PutPMP3-1 and OsLti6b. However, the four yeast transformants each showed similar levels of salt tolerance. These results imply that these PMP3 family members don't function identically under different stress tolerance conditions.

• 한국해양생명과학회지
• /
• 제6권2호
• /
• pp.80-87
• /
• 2021

본 연구에서는 과불화합물 PFOA와 PFOS potassium salt가 Mesocentrotus nudus의 10 min-수정률과 48 h-정상유생발생률에 미치는 독성영향을 반수영향농도, 무영향농도, 최소영향농도 등의 독성값 계산을 통해 확인하였다. PFOA와 PFOS potassium salt에 대한 10 min-수정률의 EC₅₀ 값은 각각 1346.43 mg/l와 536.18 mg/l로 나타났으며, 48 h-정상유생발생률의 EC₅₀ 값은 각각 42.67 mg/l와 17.81 mg/l로 나타났다. 최근 연구에 의하면, 환경 내의 PFOA와 PFOS의 농도는 지속적으로 감소하였으며, 성게류에게 급성독성을 나타낼 정도는 아닌 것으로 나타났다. 하지만 생물체내에서는 여전히 높은 농도로 관측되고 있다. 결국, PFOA와 PFOS는 생물체의 생애전주기에 걸쳐 체내 축적이 가능하기 때문에, 연안환경에 서식하는 해양생물을 이용한 생애전주기적 만성독성 연구가 필요할 것이다.

• 센서학회지
• /
• 제23권6호
• /
• pp.409-415
• /
• 2014

We had presented an inductive type intraocular pressure sensor (L-sensor) in previous work. The distance between a micro coil and a ferrite on the membrane was modulated by pressure, and as a result the inductance and resonant frequency were changed. However, L-sensor has some problems to implant in eyes. First problem is low sensitivity. When L-sensor was implanted in rabbit's eyes, resonant frequency of L-sensor was very hard to detect. Second problem is biocompatibility. Size of L-sensor is $6{\times}7{\times}1.2mm$. When L-sensor was implanted in the eyes, it caused the inflammation. Therefore, this study suggests an inductive and capacitive type IOP sensor (LCsensor). The sensitivity of the LC-sensor 27.3 kHz/mmHg under 60mmHg. It is much larger than 14 kHz/mmHg of the L-sensor. And the size of LC-sensor is 47% smaller than L-sensor. After 2 weeks from the implantation of LC-sensor into rabbit eyes, we measured the changes of resonant frequency of LC-sensor according to increased IOP by Balanced Salt Solution (BSS) injection. As a result, the sensitivity of LC-sensor in in vivo test is 25 kHz/mmHg. That is similar to the sensitivity of in vitro test.

• Asian Pacific Journal of Cancer Prevention
• /
• 제14권5호
• /
• pp.3057-3062
• /
• 2013

Background: Selecting chemotherapy regimens guided by chemosensitivity tests can provide individualized therapies for cancer patients. The 3-(4,5-dimethylthiazol-2-yl)-5-(3-carboxymethoxyphenyl)-2-(4-sulfophenyl)-2Htetrazolium, inner salt (MTS) assay is one in vitro assay which has become widely used to evaluate the sensitivity to anticancer agents. The aim of this study was to evaluate the clinical applicability and accuracy of MTS assay for predicting chemotherapeutic response in unresectable NSCLC patients. Methods: Cancer cells were isolated from malignant pleural effusions of patients by density gradient centrifugation, and their sensitivity to eight chemotherapeutic agents was examined by MTS assay and compared with clinical response. Results: A total of 37 patients participated in this study, and MTS assay produced results successfully in 34 patients (91.9%). The sensitivity rates ranged from 8.8% to 88.2%. Twenty-four of 34 patients who received chemotherapy were evaluated for in vitro-in vivo response analysis. The correlation between in vitro chemosensitivity result and in vivo response was highly significant (P=0.003), and the total predictive accuracy, sensitivity, specificity, positive predictive value, and negative predictive value for MTS assay were 87.5%, 94.1%, 71.4%, 88.9%, and 83.3%, respectively. The in vitro sensitivity for CDDP also showed a significant correlation with in vivo response (P=0.018, r=0.522). Conclusion: MTS assay is a preferable in vitro chemosensitivity assay that could be use to predict the response to chemotherapy and select the appropriate chemotherapy regimens for unresectable NSCLC patients, which could greatly improve therapeutic efficacy and reduce unnecessary adverse effects.

• Journal of Plant Biotechnology
• /
• 제39권2호
• /
• pp.106-113
• /
• 2012

Glycolysis is responsible for the conversion of glucose into pyruvate and for supplying reducing power and several metabolites. Fructose-1,6-bisphosphate aldolase (AtFBA1), a central enzyme in the glycolysis pathway, was isolated by functional complementation of the salt-sensitive phenotype of a calcineurin (CaN)-deficient yeast mutant. Under high salinity conditions, aldolase activity and the concentration of NADH were compromised. However, expression of AtFBA1 maintained aldolase activity and the NADH level in yeast cells. AtFBA1 shares a high degree of sequence identity with known class I type aldolases, and its expression was negatively regulated by stress conditions including NaCl. The fusion protein GFP-AtFBA1 was localized in the cytosol of Arabidopsis protoplasts. The seed germination and root elongation of AtFBA1 knock-out plants exhibited sensitivity to ABA and salt stress. These results indicate that AtFBA1 expression and aldolase activity is important for stress tolerance in yeast and plants.

• BMB Reports
• /
• 제40권3호
• /
• pp.396-403
• /
• 2007

Proline accumulation has been shown to correlate with tolerance to drought and salt stresses in plants. We attempt to introduce the wild-type, mutant, and fusion proBA genes derived from Bacillus subtilis into Arabidopsis thaliana under the control of a strong promoter cauliflower mosaic virus 35S (CaMV35S). The transgenic plants produced higher level of free proline than control and the overproduction of proline resulted in the increased tolerance to osmotic stress in transgenic plants. Besides, the mutation in proBA genes, which were proved to lead $\alpha$-glutamyl kinase ($\alpha$-GK) reduces sensitivity to the end-product inhibition and the fusion of proB and proA also result in increasing proline production and confer osmotolerance in transgenic lines.

• E2M - 전기 전자와 첨단 소재
• /
• 제9권10호
• /
• pp.1053-1059
• /
• 1996

The pulse-echo response of the piezoceramics PZT-polymer 3-3 type composite transducers with various PVA additions were investigated. The PZT powder was prepared by the molten salt synthesis method. The porous PZT specimens will be used as a filler to make 3-3 type comosite were prepared from a mixture of PZT and polyvinylalcohol(PVA) sphere by utilizing BURPS(Bumout Plastic Sphere) technique. It was shown that the transmitting and receiving sensitivity of 3-3 type piezoelectric composite transducers could be improved than that of solid PZT transducers. The reason is that 3-3 type piezoelectric composite have low dielectric constant, density and acoustic impedance. The distance between transducer and reflector was in good agreement with the distance calculated from the longitudinal velocity of the specimens and receiving time observed pulse-echo responses on the ultrasonic transducer analyzer.

• 한국안전학회지
• /
• 제16권2호
• /
• pp.44-50
• /
• 2001

The rotated bending fatigue test was conducted in air md in 3.5% NaCl salt solution to investigate the fatigue fracture behaviour of raw material and F.E.M dual phase steel made from raw material(SS41) by a suitable heat treatment. This study has compared the initial microcrack creation of material by tensile test with that by fatigue test. And the rotated bending test of cantilever type under the condition of 3.5% NaCl salt solution and air has investigated the corrosion fatigue fracture behaviour with the variation of stress concentration factor determined by each of notch shapes. The initial microcrack have been developed in fragile grainboundary with general corrosion occurring in raw material : in the pits built up by corrosion in F.E.M. dual phase steel because pits bring out stress concentration. It is small that the degree of decrease in corrosion fatigue life for F.E.M. dual phase steel compared with raw material because the notch sensitivity of F.E.M. dual phase steel is lower than raw material in reason of characteristics with two-phase construction.

• 대한전기학회논문지
• /
• 제45권4호
• /
• pp.558-561
• /
• 1996

PZT powders were prepared by the molten salt synthesis method. The porous PZT ceramics were made from a mixture of PZT and polyvinylalcohol(PVA) by BURPS(Burnout Plastic Sphere) technique. The porous PZT bodies were fabricated from the green compacts with various amounts of PVA spheres. The piezoelectric coefficient d$_{33}$ (334~350*10$^{-12}$ C/N)of porous PZT ceramics(364*10$^{-12}$ C/N). The figure of merit(d$_{h}$g$_{h}$) of porous PZT specimens evaluating the sensitivity for ultrasonic transducer applications was improved significantly(11~70times) in comparison with that of single phase PZT ceramics(100*10$^{-15}$ m$^{2}$/N). The thickness mode coupling factor k$_{t}$(0.5~0.6) of porous specimens was comparable with that of single phase PZT ceramics(k$_{t}$=0.7). The mechanical quality factor of porous PZT specimens was smaller than 10, and thus these porous PZT ceramics would be believed as a good candidate for broad band hydrophone applications. (author). 10 refs., 7 figs.igs.igs.