• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.7 no.1
• /
• pp.1-8
• /
• 2011

Advanced SITs of the evolutionary PWRs have the advantage that they can passively control the ECC water discharge flow rate. Thus, the LPSI pumps can be eliminated from the safety injection system owing to the benefit of the advanced SITs. In the present study, a passive sealing plate was designed in order to overcome the shortcoming of the advanced SITs, i.e., the early nitrogen discharge through the stand pipe. The operating principle of the sealing plate depends only on the natural phenomena of buoyancy and gravity. The performance of the sealing plate was evaluated using the VAPER test facility, equipped with a full-scale SIT. It was verified that the passive sealing plate effectively prevented the air discharge during the entire duration of the ECC water discharge. Also, the major performance parameters of the advanced SIT were not changed with the installation of the sealing plate.

• Journal of the Korea Safety Management & Science
• /
• v.13 no.4
• /
• pp.71-79
• /
• 2011

The work environment of locomotive cabs has long been an important issue in the design of railload systems since it is quite critical in terms of system's operational safety. It is getting more attention as the running speed of the trains goes up these days. To this end, this paper describes how to systematically construct a DB for the requirements set in the course of the improvement process for the aforementioned cab work environment. As a solution approach, we have adopted the requirement architecture concept to cover the whole activities required to do such as in requirements generation, DB construction, change management, and traceability management. Specifically, based on the requirement architecture framework a requirement process to collect requirements for improvement is discussed, and the guide lines are suggested for verification and validation of the developed requirements. In addition, a base schema and requirements templates are developed, which will be used in generating requirements and constructing a DB. Finally, it is demonstrated how the requirements DB for locomotive cabs can be constructed using a computer-aided tool in an integrated fashion.

• Journal of the Korean Society of Safety
• /
• v.25 no.6
• /
• pp.180-185
• /
• 2010

We have to develop more correct and systematic way to choose Hazardous Highway Segments. In this research, we applied CRP(Continuous Risk Profile) technique which developed by UC Berkeley Traffic Safety Center in year of 2007, and can analyze yearly dangerous level tendency of continuity in the route of main road that is under California Department of Transportation(Caltrans). We changed standard of CRP to suit in Korean circumstance with consideration in radius of curve and traffic volume. For the verification by actual accident data, we embodiment the CRP by using the data from total of 587 case of accident in latest 10 years in Gyeong-Bu Highways, the amount of 56km. Finally, the effectiveness of technique in this research has been verified by obtained same result with current method for Hazardous Highway Segments. In addition, when calculating the Hazardous Highway Segments with technique that presented in this research we obtained following statements. First, identified dangerous level of continuity in the route by using CRP. Second, Accurate of Actual Hazardous Highway Segments selection has been developed by using last 10 year's data and profile making which provide simplicity analyze of Tendency. Third, after reforming the way of selection, effective range has been wider than former selection and it gives advantage for the policy side.

• Nuclear Engineering and Technology
• /
• v.37 no.6
• /
• pp.587-594
• /
• 2005

In an effort to develop a thermal-hydraulic (TH) safety analysis code for Gas-cooled Reactors (GCRs), the MARS code, which was primarily developed for TH analysis of water reactor systems, has been extended here for application to GCRs. The modeling requirements of the system code were derived from a review of major processes and phenomena that are expected to occur during normal and accident conditions of GCRs. Models fur code improvement were then identified through a review of existing MARS code capability. Among these, the following priority models necessary fur the analysis of limiting high and low pressure conduction cooling events were evaluated and incorporated in MARS-GCR/V1 : 1) Helium (He) and Carbon Dioxide ($CO_2$) as main system fluids, 2) gas convection heat transfer, 3) radiation heat transfer, and 4) contact heat transfer models. Each model has been assessed using various conceptual problems for code-to-code benchmarks and it was demonstrated that MARS-GCR/V1 is capable of capturing the relevant phenomena. This paper describes the models implemented in MARS-GCR/V1 and their verification and validation results.

• Nuclear Engineering and Technology
• /
• v.40 no.5
• /
• pp.397-408
• /
• 2008

This paper describes the application of a software fault tree analysis (FTA) as one of the analysis techniques for a software safety analysis (SSA) at the design phase and its analysis results for the safety-critical software of a digital reactor protection system, which is called the KNICS RPS, being developed in the KNICS (Korea Nuclear Instrumentation & Control Systems) project. The software modules in the design description were represented by function blocks (FBs), and the software FTA was performed based on the well-defined fault tree templates for the FBs. The SSA, which is part of the verification and validation (V&V) activities, was activated at each phase of the software lifecycle for the KNICS RPS. At the design phase, the software HAZOP (Hazard and Operability) and the software FTA were employed in the SSA in such a way that the software HAZOP was performed first and then the software FTA was applied. The software FTA was applied to some critical modules selected from the software HAZOP analysis.

• Journal of the Korean Society of Safety
• /
• v.27 no.6
• /
• pp.48-53
• /
• 2012

This paper is purposed to develop portable electric instrument to select NI-9223(National instrument comp.) and clamp meter(HIOKI comp.), which can be used in developing electric instrument, to detect leakage current(ZCT) and current(CT) signals. In this paper, The electric instrument that can interface with current and leakage current instrument(HIOKI 9283), is developed by NI-9223 of NI comp.. HIOKI clamp meter can measure current signals certainly by high-sensitivity of 10 ${\mu}A$ resolution(leakage current : at 10 mA range) and current 1~200A range. The NI-9223 use four 16-bit analog-to-digital converters(ADCs) for true simultaneous sampling at up to 1 MS/s per channel. NI-9223 can synchronize all analog input modules installed in the same chassis to share the same start clock and/or sample clocks. The monitoring program is developed by SignalExpress of LabVIEW. The monitoring program are developed to analyze at simultaneous sampling on electrical signals such as leakage current(ZCT) and current(CT). The developed system verification tests were conducted, and portable electric instrument can be used in place which requires analysis of the actual electrical signal.

• Journal of Fashion Business
• /
• v.19 no.3
• /
• pp.121-129
• /
• 2015

Aloe is a popular and effective agent used to cosmetic ingredient. It could replace artificial pigment on make-up base product and it is highly probable that might be useful as ingredients of multi-functional color cosmetic. In this study, we made a makeup base containing aloe extract and tested the effectiveness, safety and stability. Contents of polyphenol and flavonoid from the aloe extract were measured. To determine the antimicrobial effect from the aloe we used the paper disc diffusion method. We assessed the safety of make-up base containing aloe to cultured macrophage RAW 264.7 cells by MTT assay. Polyphenol contents of aloe extract and flavonoid respectively were 48 mg/g and 10 mg/g, in the 10 % concentration aloe extract. In case of aloe make-up base, the clear zone against Stapylococcus epidermidis was 9~11 mm and Stapylococcus aureus was also 9~11 mm. Growth activity of macrophage RAW 264.7 cells was over 80% in all concentration of make-up base containing aloe and general make base product. In conclusion aloe extract may be able to substitute the synthetic pigments and considered to be uses for ingredients multi-functional color cosmetic's ingredient.

• Journal of Drive and Control
• /
• v.16 no.2
• /
• pp.8-14
• /
• 2019

A typical gantry crane is generally used to lift and transport objects in various workplaces. Most of the supporting structures in a gantry crane are fixed on the ground while the moving hoist is running overhead along the girder. There are some disadvantages to its long installation time and high installation cost. Therefore, a hydraulic based gantry crane was studied to solve the issues of typical gantry cranes. The supporting structure of the proposed gantry crane consisted of a hydraulic cylinder and telescopic boom. The dimension of the proposed gantry crane can be decreased due to its simplified structure. The analytical and theoretical methods were used to verify the structural stability of the proposed crane. The most severe load condition was considered for the analysis, and the stress and deflection of the structure are analyzed. The simulation results were as expected from the theoretical analysis. Finally, the structural and dynamic safety of the proposed hydraulic based gantry crane was validated. The obtained results can be used as guidelines in the design process of the hydraulic based gantry crane.

• Nuclear Engineering and Technology
• /
• v.51 no.7
• /
• pp.1842-1852
• /
• 2019

The AP1000 reactor coolant pump is a vertical shielded-mixed flow pump, is the most important coolant power supply and energy exchange equipment in nuclear reactor primary circuit system, whose steadystate and transient performance affect the safety of the whole nuclear island. Moreover, safety demonstration of reactor coolant pump is the most important step to judge whether it can be practiced, among which software simulation is the first step of theoretical verification. This paper mainly introduces the fluid-solid coupling simulation method applied to reactor coolant pump, studying the feasibility of simulation results based on workbench fluid-solid coupling technology. The study found that: for the unsteady calculations of the pure liquid media, the average head of the reactor coolant pump with bidirectional fluid-solid coupling decreases to a certain extent. And the coupling result is closer to the real experimental value. The large stress and deformation of rotor under different flow conditions are mainly distributed on impeller and idler, and the stress concentration mainly occurs at the junction of front cover plate and blade outlet. Among the factors that affect the dynamic stress change of rotor, the pressure load takes a dominant position.

• Journal of the Korean Society of Safety
• /
• v.34 no.3
• /
• pp.50-56
• /
• 2019

Precast members have relatively good quality because they are manufactured in an environment suitable for quality control. A typical precast method in which pre-fabricated segments are assembled in the field requires a joint. Although the joint is a small part of the member, it greatly affects the behavior and quality of the structural member. In the previous study of this paper, the flexural strength of a joint, which is generally applied to half-depth precast deck systems, was verified to have higher strength than the design requirement. In addition, the proposed joint has been verified to have higher strength by reinforcing the connecting rebar. However, even if the flexural strength of the joints is sufficient, excessive deflection or lack of fatigue performance is likely to cause cracks in the half-depth precast deck system. In this study, the serviceability of the half-deck precast panel specimens with joints was evaluated and the experimental verification was conducted to evaluate the fatigue performance of the joint without connection rebar. As a result, the serviceability such as deflection and crack width was found to be higher than the design requirement in all the specimens. In the fatigue test, the fatigue effect was insignificant even in the absence of connection rebar.