• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.18 no.1
• /
• pp.72-79
• /
• 2008

This study was surveyed to assess the status of safety accidents occurred in work-places and prepare the fundamental data and prevent the safety accidents. The authors reviewed and analysed the charts of accident cases treated at a primary care clinic in A city from January 1991 to December 2006. The data were classified according to the USA Standards Institute and International Labour Organization method. We analyzed the data using SPSS program. The results were as follows : 1. The total cases of accidents were 455 for 8 years. 2. Accidents were mostly common in the workers who are in thirties and forties age(84.4%). 3. As season variation, spring and summer were common than others, but there was no statistical significance on season, month and weekday. 4. The most frequent injured part of the body were hand and finger, which was 36.0% among total cases. 5. According to the accidents type, cases of caught in, under or between were most frequently observed as 53.9% of the total cases. 6. The most common source of injuries was power machine(50.5%). 7. According to the unsafe acts, cases of carelessness and unsafe information were most frequently observed as 71.2% of the total cases. 8. Admission rate(5.5%) and official report rate(2.2%) were very low rate. As above results, the authors recommend to prepare the systemic control programs on environmental and human factors of safety accidents such as improving the working conditions, working facilities, working methods and safety education, and control of working time for working day.

• Geomechanics and Engineering
• /
• v.24 no.6
• /
• pp.519-529
• /
• 2021

In coal mining activities, the abutment stress of the coal has to undergo cyclic loading and unloading, affecting the strength and seepage characteristics of coal; additionally, it can cause dynamic disasters, posing a major challenge for the safety of coal mine production. To improve the understanding of the dynamic disaster mechanism of gas outburst and rock burst coupling, triaxial devices are applied to axial pressure cyclic loading-unloading tests under different axial stress peaks and different pore pressures. The existing empirical formula is use to perform a non-linear regression fitting on the relationship between stress and permeability, and the damage rate of permeability is introduced to analyze the change in permeability. The results show that the permeability curve obtained had "memory", and the peak stress was lower than the conventional loading path. The permeability curve and the volume strain curve show a clear symmetrical relationship, being the former in the form of a negative power function. Owing to the influence of irreversible deformation, the permeability difference and the damage of permeability mainly occur in the initial stage of loading-unloading, and both decrease as the number of cycles of loading-unloading increase. At the end of the first cycle and the second cycle, the permeability decreased in the range of 5.777 - 8.421 % and 4.311-8.713 %, respectively. The permeability decreases with an increase in the axial stress peak, and the damage rate shows the opposite trend. Under the same conditions, the permeability of methane is always lower than that of helium, and it shows a V-shape change trend with increasing methane pressures, and the permeability of the specimen was 3 MPa > 1 MPa > 2 MPa.

• Food Science and Preservation
• /
• v.30 no.4
• /
• pp.573-588
• /
• 2023

The purpose of this study was to monitor changes in the quality of ginseng and predict its shelf-life. As the storage period of ginseng increased, some quality indicators, such as water-soluble pectin (WSP), CDTA-soluble pectin (CSP), cellulose, weight loss, and microbial growth increased, while others (Na₂CO₃-soluble pectin/NSP, hemicellulose, starch, and firmness) decreased. Principal component analysis (PCA) was performed using the quality attribute data and the principal component 1 (PC1) scores extracted from the PCA results were applied to the multivariate analysis. The reaction rate at different temperatures and the temperature dependence of the reaction rate were determined using kinetic and Arrhenius models, respectively. Among the kinetic models, zeroth-order models with cellulose and a PC1 score provided an adequate fit for reaction rate estimation. Hence, the prediction model was constructed by applying the cellulose and PC1 scores to the zeroth-order kinetic and Arrhenius models. The prediction model with PC1 score showed higher R² values (0.877-0.919) than those of cellulose (0.797-0.863), indicating that multivariate analysis using PC1 score is more accurate for the shelf-life prediction of ginseng. The predicted shelf-life using the multivariate accelerated shelf-life test at 5, 20, and 35℃ was 40, 16, and 7 days, respectively.

• Journal of the Korean Society of Safety
• /
• v.29 no.5
• /
• pp.136-145
• /
• 2014

This article has compared the level of activities of occupational safety and health in workplace among sub-sectors of manufacturing industry in order to set the priority for policy intervention. Data of manufacturing industry in the survey on the current status of occupational safety and health was used with factor analysis and radar graphic method. Authors have categorized sub-sectors of manufacturing industry into four categories, attained group, active group, neglected group, and passive group based on injury rate, level of safety and health activities. The neglected group may be the first target group for occupational safety and health policy guiding some detailed occupational safety and health activities. Limitation of this study is that cross sectional data was analyzed. The long term effect could not be analyzed.

• Journal of the Korea Safety Management & Science
• /
• v.1 no.1
• /
• pp.19-28
• /
• 1999

This paper presents the safety management model, which is appropriate for small-to-medium enterprises that rank the highest disaster rate. It is required for these companies to modify and improve the safety-related articles and it is peformed to compare and analyze the industrial disasters and safety management systems between large enterprises and small-to-medium enterprises. The basic direction of change of industrial safety healthy system must be classified to the dual direction. For large enterprises, it is focused on not pre-regulations but post-regulations based on the self-control safety management system. But for small-to-medium enterprises, it is required to intensify the safety management system and the safety responsibility for owners or administrators. Specially, the responsibility for disaster must be more strengthened by the penalty and the insurance method, and then it must be performed not only the financial support of government but also middle and long-term technical support by private safety organizations.

• Proceedings of the Safety Management and Science Conference
• /
• 1999.11a
• /
• pp.73-82
• /
• 1999

This paper presents the safety management model, which is appropriate for small-to-medium enterprises that rank the highest disaster rate. It is required for these companies to modify and improve the safety-related articles and it is performed to compare and analyze the industrial disasters and safety management systems between large enterprises and small-to-medium enterprises. The basic direction of change of industrial safety healthy system must be classified to the dual direction. For large enterprises, it is focused on not pre-regulations but post-regulations based on the self-control safety management system. But for small-to-medium enterprises, it is required to intensify the safety management system and the safety responsibility for owners or administrators. Specially, the responsibility for disaster must be more strengthened by the penalty and the insurance method, and then it must be performed not only the financial support of government but also middle and long-term technical support by private safety organizations.

• Journal of the Korean Society of Safety
• /
• v.17 no.4
• /
• pp.160-167
• /
• 2002

In order to prepare effective safety management program, the evaluation of safety management level must be implemented. But research efforts on the safety management in Korea are limited to evaluate large construction companies. This study is initiated with the purpose of understanding safety management system in medium- and small-sized construction companies. The study performed questionnaire survey with 54 large companies, 46 medium- and small-sized ones. Employing 'Management Safety Health Index' of Maekyung Economic Institute, 34 questionnaire items were chosen by 9 associated experts. Based on the questionnaire survey, analyses were performed to compare safety management level between large companies as well as medium- and small-sized ones.

• Journal of the Korean Society of Safety
• /
• v.25 no.6
• /
• pp.47-52
• /
• 2010

Many industrial accidents have occurred over the years in the manufacturing and construction industries in Korea. However, as the service industry has increased continuously, the share of the accident rate in the service industry was 39.07% in 2009, while the manufacturing industry share was 33.73%. The service industry share overtook the manufacturing industry share for the first time. Therefore, this research considers prevention of industrial accidents in the service industry as well as manufacturing and construction industries. This paper describes a procedure and a method to estimate efficient accident rate forecasting and estimated zero accident time in the service industry in order to prevent industrial accidents in the transportation, storage, and telecommunication divisions. This paper proposes a model using an analytical function for the sake of very efficient accident rate forecasting. Accordingly, this paper has develops a program for accident rate forecasting, zero accident time estimating, and calculation of achievement probability through MFC (Microsoft Foundation Class) software Visual Studio 2008 in the transportation, storage, and telecommunication divisions. In results of this paper, ARIMA (Auto Regressive Integrating Moving Average) is regarded as a very efficient forecasting model for the transportation, storage, and telecommunication division. In testing this model, value minimizing the Sum of Square Errors (SSE) was calculated as 0.2532. Finally the results of this paper are sure to help establish easy accident rate forecasting and strategy or method of zero accident time in the service industry for prevention of industrial accidents.

• Journal of Radiation Protection and Research
• /
• v.44 no.3
• /
• pp.97-102
• /
• 2019

Background: Dose rate meters are the most widely used, and perhaps one of the most important tools for the measurement of ionising radiation. They are often the first, or only, device available to a user for an instant check of radiation dose at a certain location. Throughout the world, radiation safety practices rely strongly on the output of these dose rate meters. But how well do we know the quality of their output? Materials and Methods: This review is based on the measurements 1,158 commercially available dose rate meters of 116 different makes and models. Expected versus the displayed dose patterns and consistency was checked at various dose rates between $5{\mu}Gy{\cdot}h^{-1}$ and $2mGy{\cdot}h^{-1}$. Samples of these meters were then selected for further investigation and were exposed to radiation sources covering photon energies from 50 keV to 1.5 MeV. The effect of detector orientation on its reading was also investigated. Rather than focusing on the angular response distribution that is often reported by the manufacturer of the device, this study focussed on the design ergonomics i.e. the angles that the operator will realistically use to measure a dose rate. Results and Discussion: This review shows the scope and boundaries of the ionising radiation dose rate estimations that are made using commonly available meters. Observations showed both inter and intra make and model variations, occasional cases of instrument failure, instrument walk away, and erroneous response. Conclusion: The results indicate the significance of selecting and maintaining suitable monitors for specific applications in radiation safety.

• Proceedings of the Safety Management and Science Conference
• /
• 2001.05a
• /
• pp.199-203
• /
• 2001

In today's business transactions, it is more and more common to see that the buyers are allowed some grace period before they settle the account with the supplier. In this regard, we analyze the problem of determining the buyer's EOQ when the supplier allows day-terms credit. For the analysis, it is assumed that the buyer's demand rate is a function of the on -hand inventory level and the relevant mathematical model is developed.