• 한국안전학회지
• /
• 제27권5호
• /
• pp.126-134
• /
• 2012

The purpose of this study is to investigate waterproofing performance of self adhesive sheet combined polymer resin and poly-iso butylene. For the performance estimation of external waterproofing of concrete underground structures, there can be required various properties such as adhesion strength, hair crack resistance, repeat low and high temperature test, and so on. In this study, there engineering properties of composite system using polymer resin and poly-iso butylene were examined and could be confirmed to satisfy the guidelines of KS. Especially, it was turn out that the adhesion properties was excellent and high crack-resistance up to 1.49mm will be perform.

• Steel and Composite Structures
• /
• 제24권1호
• /
• pp.37-52
• /
• 2017

To quantitatively assess the safety against seismic collapse of eccentrically braced steel frame (EBSF) system, 24 typical EBSFs with K-shape and V-shape braces with seismic precautionary intensities 8 and 9 were designed complying with China seismic design code and relative codes to constitute archetype space of this structure system. In the archetype space, the collapse probability of the structural system under maximum considered earthquakes (MCE) was researched. The results show that the structures possess necessary safety against seismic collapse when they respectively encounter the maximum considered earthquakes corresponding to their seismic precautionary levels, and their collapse probabilities increase with increasing seismic precautionary intensities. Moreover, the EBSFs with V-shape braces have smaller collapse probability, thus greater capacity against seismic collapse than those with K-shape braces.

• 한국안전학회지
• /
• 제22권2호
• /
• pp.22-27
• /
• 2007

To assess a creep life of elevated temperature plant components, inspections and analysis are usually focused on the critical locations. In this study, stress analysis of a weld region in branch part of Y-piece was conducted by using a three-dimensional finite element analysis. The stresses at the inner and outer surface in the weld part were estimated by using elastic and elastic-creep analysis. For the elastic-creep analysis two kinds of elastic-creep analysis was conducted. The one was assumed that base and weld material properties were same and the other was that material properties were different between base and weld metal. The material properties of base and weld metal were used from reference data. The results showed the stress relaxation level and its location. The result stresses are also compared with elastic stresses.

• 한국안전학회지
• /
• 제25권4호
• /
• pp.48-60
• /
• 2010

The fire resistance performance of 2 RC slabs after exposure to the ISO-834 fire standard without loading has been experimentally investigated. A Comparison is made of the fire resistance performance between RC slabs without PP(polypropylene) fibers and RC slabs with PP fibers. From the fire test results, the presence of PP fibers in RC slabs can reduce spalling and enhance their fire resistance. Until now, the determination of fire resistance of reinforced concrete(RC) slabs has essentially been based on tabulated data. According to ACI 216 code and EUROCODE 2, the design of concrete structures is essentially based on tabulated data for appropriate concrete cover and various fire durations. From the comparison between fire test results and codes, current fire design provisions of codes such as the ACI 216 and the EUROCODE 2 are unconservative for estimating mechanical properties of RC slabs at elevated temperatures.

• 한국안전학회지
• /
• 제15권1호
• /
• pp.86-92
• /
• 2000

Recently, more advanced electronic elements become, they consume powerful and radiate more heat in devices. So the most suitable packaging technique is keenly needed. The most important purpose of packaging is to protect devices within a system for a long time and to prevent life of devices from external environments; floating ions such as humidity or sodium, and exposure from ultraviolet rays. In order to study the electrical properties of silicone gels often used as packing material due to the curing condition, volume resistivity and AC breakdown experiment are performed. Specimens are made up at several cured times and temperatures condition ; 0.5[H], 1[H] and 2[H] at 100[$^{\circ}C$], 125[$^{\circ}C$], 150[$^{\circ}C$], 160[$^{\circ}C$], 170[$^{\circ}C$] and 180[$^{\circ}C$]. It is confirmed that from volume resistivity experiment liquid silicone become get state at 90~100 [$^{\circ}C$] and cured specimen for 1~2[H] at 170[$^{\circ}C$] are superior in electrical properties.

• 한국식품위생안전성학회지
• /
• 제14권1호
• /
• pp.84-89
• /
• 1999

Octenylscuccinated corn starches prepared by reaction of corn starch with 1-octenylsuccinic anhydride(OSAn) and their degree of substitution (DS), reaction efficiency(RE), residual octenylsuccinic acid (OSA), and physicochemical properties were compared with those of the native corn starch. DS increased with increase of OSAn and RE was much nearly the same regardless of increased of OSAn. The content of residual of residual OSA was significantly lower than that of regulation of food additives. And as washing frequency of dispersion of the reactant was increased, the content of residual OSA of octenylsuccinated starch was decreased. Raid Visco-Analyzer initial pasting temperature and setback of octenylsuccinated starches decreased whereas peak viscosity and breakdown increased. When DS of octenylsuccinated starches increased, temperature of initial gelatinization of octenylscuccinated starches drastically decreased. The octenylsuccinated starches also formed clearer pastes. The solubility was much nearly the same regardless of increase of DS at 7$0^{\circ}C$ but the swelling power increased 1.2~1.7 times higher than that of native corn starch at 7$0^{\circ}C$. The water binding capacity of octenylsuccinated starches also decreased.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2002년도 추계학술대회
• /
• pp.253-259
• /
• 2002

The value of charge currnet, discharge current, ${\varepsilon}r^'$,${\varepsilon}r^{'}$ residual voltage was measured inorder to investigate electric properties in Ethylene Prophylene Rubber for is irradiated C0$^{60}$$\gamma$ ray 0~38.1 Mrad. The value of charge current and the discharging current of the EPR is influenced by C0$^{60}$-$\gamma$- irradiation dose. The charging current and the discharging current of EPR increas, depending on the ratio of degradation. As the irradiatin dose is increased, the peak of residual voltage moves to the slorter time. The properties specific electric constant due to time variation was appeared dispersion by plentiful C0$^{60}$$\gamma$- irradiation dose. The increase of peak in ${\varepsilon}r^{'}$ is attrib uted to the irratiation dose almost proportionally.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2012년 춘계학술대회
• /
• pp.579-583
• /
• 2012

The Design of Experiment (DOE) is a most practical technique when establishing an optimal condition for production technology in Six Sigma innovation project. This research proposes the assessment of properties of error terms, such as normality, equal variance, unbiasedness and independence. The properties of six nonparametric ranking techniques for checking normality assumption are discussed as well as run test which is used to identify the randomness, and to check unbiased assumption. Furthermore, Durbin-Watson (DW) statistics and ARIMA (p,d,q) process are discussed to identify the serial correlation.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2012년 춘계학술대회
• /
• pp.277-292
• /
• 2012

The research presents an application of Balanced ANOVA (BANOVA) by utilizing randomized orders for various Split-Plot Designs (SPDs) which include two cell designs, split-plot with one-way HTC (Hard to Control) factor, split-plot with two-way HTC factor, split-split-plot design and nested design. In addition, four MINITAB examples of 2-level split-plot designs based on the number of blocks and the type of whole-plots are presented for practitioners to obtain comprehensive understanding. Furthermore, the geometrical interrelated properties among three typical Designs of Experiments (DOE), such as Factorial Design (FD), Response Surface Design (RSD), and Mixture Design (MD) are discussed in this paper.

• 한국안전학회지
• /
• 제14권1호
• /
• pp.108-115
• /
• 1999

It has been recognized that the mechanical properties of structural steels can be accepted very greatly in a state of normal temperature. While, under low temperature conditions the properties of the structural steels may not be appropriately achieved. When the various and particular structures will be constructed in an intense cold region afterward, the mechanical properties of a stainless steel under low temperature condition must be investigated. The purpose of this paper is to account for the fracture mechanics of structures in the state of low temperatures. The fracture toughness was examined through an experimental test from which the tensile strength and impact values of STS 304 were obtained. In order to demonstrate the present studies, the fracture toughness was compared with the test results for SWS 50 published previously by an author.