• Journal of the Korea institute for structural maintenance and inspection
• /
• v.26 no.5
• /
• pp.43-48
• /
• 2022

In order to evaluate the seismic performance of the modular expansion joint known for its large expansion allowance and remarkable durability, this study conducts seismic response analysis and seismic simulation test. The bridge selected for the seismic response analysis is a cable stayed bridge with main span length of 1,000m. Three artificial earthquake were generated with respect to the design response spectra of the Korean Standards (KS), AASHTO LRFD and Eurocode, and applied to the selected bridge. The seismic simulation tests reproduced the artificial earthquakes using dynamic hydraulic actuators in the longitudinal and transverse directions. The test results verified the durability and safety of the expansion joint in view of its seismic behavior since abnormal behavior or failure of the expansion joint was not observed when the artificial earthquake waves were applied in the longitudinal direction, transverse direction and both directions.

• Asian Journal of Innovation and Policy
• /
• v.10 no.1
• /
• pp.108-131
• /
• 2021

The increase of international trade across countries and borders results in increased risks associated with the inflow of new pests and diseases. These risks are likely to be increased more rapidly due to climate change. Some countries implement strict regulations on imports to prevent these risks and protect biosecurity, food safety, and public health. However, the problems arise when the diseases and pests are found in a country where their economic structure largely depends on agricultural exports and cause ripple effects on other industries and ecosystems. Therefore, establishing an effective quarantine system is essential to protect and recover from the damage caused by non-native diseases and pests. This study's objectives are 1) analyzing the agricultural policies relate to the quarantine system on diseases and pests in Korea, 2) evaluating the Korea plant quarantine system's value, and 3) simulating plant quarantine policy strategies. We estimated the Korean quarantine system's benefits on diseases and pests to reach these objectives. The benefits are measured with a willingness to pay from respondents surveyed by the contingent valuation method (CVM). The CVM approach directly asks people how much they would willingly pay for food security. Finally, the Korean quarantine system's values are simulated with several policy scenarios and different scales of infection at the regional level. The results of this study can deliver policy implications on the quarantine system innovation in developing countries including Asia.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.8
• /
• pp.1130-1135
• /
• 2022

In Seoul, about 75,000 CCTVs are installed in 25 district offices. Each ward office has built a control center for CCTV control and is performing 24-hour CCTV video control for the safety of citizens. Seoul Metropolitan Government is building a smart city integrated platform that is safe for citizens by providing CCTV images of the ward office to enable rapid response to emergency/emergency situations by signing an MOU with related organizations. In this paper, when an incident occurs at the Seoul Metropolitan Government Office, the escape route is predicted by discriminating people and vehicles using the AI DNN-based Template Matching technology, MLP algorithm and CNN-based YOLO SPP DNN model for CCTV images. In addition, it is designed to automatically disseminate image information and situation information to adjacent ward offices when vehicles and people escape from the competent ward office. The escape route prediction and tracking system using artificial intelligence can expand the smart city integrated platform nationwide.

• Journal of Digital Convergence
• /
• v.20 no.3
• /
• pp.265-273
• /
• 2022

The purpose of this study is to take a look the situation of social enterprises under CIVID-19 Pandemic and to suggest future directions. The COVID-19 pandemic which started at the end of 2019, has influenced the various areas of our society, such as health, economic, social and networking. The virus is spread through human respiratory, and it is working as a disability factor in human focused social economy. Under the COVID-19 pandemic situation, Social entrepreneurs are being constrained in financial aspects. In the process of continuing pandemic, the size of the social economy has been expanded and cleaning & health businesses are showing economic performance. This is to tell the fact that social economy is solving COVID-19 issues based on a reciprocity and solidarity. To create a sustainable ecosystem for the social economy, we should select and promote universal and concrete future directions at the economic and social safety net building level rather than to respond to COVID-19.

• Journal of the Korean Geosynthetics Society
• /
• v.23 no.2
• /
• pp.19-27
• /
• 2024

Geotechnical structures such as dams, tunnels, and slopes require regular inspection and monitoring to ensure stability. Domestically, drones and accelerometers have become common tools for inspecting and monitoring various structures. However, drones have difficulty identifying internal changes in structures and the subsurface, and accelerometers generally serve for seismic design or strain measurement purposes. Therefore, this paper proposes to utilize accelerometers to monitor the internal information of the ground on a real-time or periodic basis. The proposed method utilizes a part of the analysis technique from the SASW test to monitor the stability and state changes of geotechnical structures. Cases where SASW was used to evaluate the safety of geotechnical structures, such as slopes, dams, and tunnels, were reviewed to verify the suitability of the technology. To make the proposed method more practical, the study considered using only the first-step analysis to derive the dispersion curve rather than the second-step analysis to determine the shear wave velocity profile, which requires complex analysis. The proposed technique is expected to enable the continuous monitoring and inspection of geotechnical structures by utilizing accelerometers.

• Korean Journal of Community Nutrition
• /
• v.29 no.4
• /
• pp.348-357
• /
• 2024

Objectives: The total population of Korea began to decline in 2019; in particular, the population in rural areas has been rapidly decreasing and is aging. Therefore, the government has designated depopulation areas and is seeking ways to support them. To assess whether health disparities exist between areas with population decline and those without, this study used community health survey data to observe temporal changes in health behaviors between the two types of areas. Methods: The analysis used Community Health Survey data from 2010 to 2019, and regional classification was divided by depopulation areas designated by the Ministry of the Interior and Safety. Trends in health behavior and chronic disease prevalence between depopulation and non-depopulation areas were analyzed. All analyses were conducted using complex sample analysis procedures in SAS 9.4 software. Results: The smoking rate steadily decreased in both depopulation and non-depopulation areas, whereas the high-risk drinking rate increased slightly. The walking practice rate did not improve in depopulation areas compared to non-depopulation areas. Furthermore, nutritional labeling usage rate was consistently lower in depopulation areas than in non-depopulation areas, with the gap being the largest. The prevalence of obesity, diabetes, and hypertension showed that the gap between depopulation and non-depopulation areas is continuously increasing. Conclusions: Health behaviors in depopulation areas have not improved, and the prevalence of chronic diseases is increasing rapidly. Therefore, the demand for health care services that support healthy lifestyle practices and chronic disease management in these areas is expected to increase.

• Journal of the Korean housing association
• /
• v.17 no.4
• /
• pp.37-46
• /
• 2006

The primary purpose of this study is to provide the managerial guidelines for the comprehensive apartment improvement planning. This plan will consider the time-serial apartment management plan. Through a questionnaire survey, residential satisfactions and demands on apartment units, apartment building and site amenities were investigated. Based on the statistical analysis, residents' demands were assessed. The resident groups were categorized into the three groups considering the apartments' life span where they were living. The results from the statistical analysis were finally compared with the long-term apartment management plan demonstrated in the Housing Code of the Ministry of Construction and Transportation. The major findings of this study were as follows. First, residential satisfaction on the equipments in apartment units was higher than that on the unit plans. Residents' satisfaction on the communal facilities in apartment sites was lower than that on the other factors. Thus, apartment unit plans and communal facilities in sites need to be improved. Second, though we had the three residents' groups, for the results of the residential satisfaction, the groups were divided into two groups: 'less than 10 years group'and 'over than 10 years group'. Considering the residents' demands for the apartment improvement according to the life span of apartment complexes, the habitability factor was demanded by 'the less than 10 years group' and the safety factor by 'the over than 10 years group'. Compared the residents' demands for apartment improvements with the long-term apartment management plan demonstrated in the Housing Code, the improvement cycles demanded by residents were shorter than those in the code. Thus, the management plan in the code should be reconsidered.

• Tunnel and Underground Space
• /
• v.19 no.6
• /
• pp.507-516
• /
• 2009

In cases of high-level radioactive waste repositories, heat load is apparent by radioactive waste decay. The safety of a waste repository would be influenced by changing circumstances caused by heat transfer through rock. Thus, a ventilation system is necessary to secure the waste repository. The first priority for building an appropriate ventilation system is completing a computer simulation research with thermal rock properties and a heat transfer coefficient. In this study, the heat transfer coefficient in KURT was calculated using the measurement of inner circumstance factors that include dry bulb and wet bulb temperature, rock surface temperature, and barometric pressure. The heater that is 2 m in length and 5 kw in capacity heats the inside of rock in the research module by $90^{\circ}C$. As a result of determining the heat transfer coefficient in the heating section, the changes of heat transfer coefficient were found to be a maximum of 7.9%. The average heat transfer coefficient is approximately 4.533 w/$m^2{\cdot}K$.

• Fire Science and Engineering
• /
• v.26 no.6
• /
• pp.85-91
• /
• 2012

To reduce human life and property damage at the fire in a building, it is most critical to control flame spread in the early stage. Fire spread prevention measure generally includes fire resistance performance securing of structure member in the arson zone and use limitation based on combustion performance of finishing material. The latter is most fundamental fire safety design to determine flame spread, but domestic combustion test determines combustion performance by specimen sized fire test method. Thus, there are many restrictions in the determination of combustion performance by composite material such as sandwich panel. Especially, outer finishing material uses a variety of composite material such as dry bit, aluminum composite panel, and metal panel compared to inner finishing material. Therefore, this study would determine vertical fire spread features by a full scaled fire experiment through the test method of ISO 13785-2, an international test standard.

• Fire Science and Engineering
• /
• v.33 no.6
• /
• pp.53-62
• /
• 2019

A recent trend shows that more buildings are being constructed as mixed-use (residential and commercial) properties for efficient land use. This has led to an increased frequency in the occurrence of fires and the associated potential risks. In particular, in case of high-rise apartments, at least one of the elevators in each building is installed for evacuation purposes separately from the emergency elevator; therefore, for a combined ancillary room and emergency elevator platform situation, the structure is inevitably in series with the evacuation elevator platform. Thus, a proposal for a new type of ventilation zone based on existing national fire safety codes is required to achieve smoke control performance. To this end, the air egress velocity and differential pressure of each ventilation zone are checked using the "CONTAM" software; further, an alternative is proposed to secure smoke control performance for series structures.