• Korean Journal of Construction Engineering and Management
• /
• v.11 no.1
• /
• pp.130-141
• /
• 2010

Poor expertise in equipment operation and installation, coupled with unpredictable natural disaster, usually directly leads to disastrous accidents of large lifting equipment such as tower cranes. For example, 52 tower cranes fell down due to the unstable support in Korea at the attack of Typhoon "Maemi" in 2003, which damaged property and caused loss of life. In high-rise construction projects, top-slewing or luffing-jib tower cranes needs checking the stability of lateral-support in addition to the bottom support such as the foundation. In this study, the optimization algorithm for lateral-support of tower cranes is conducted, which is expected to enhance the structural stability of tower cranes and save the cost in conflict with the safety.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.44 no.2
• /
• pp.78-84
• /
• 2021

In addition to physical risks such as electrical, chemical, and mechanic ones in the workplace, psychosocial risks are also raising as an important issue in recent years in connection with human rights and work-life balance policies. The purpose of this study is to confirm the degree of effect of the psychosocial risk management plan at the workplace on workers through logistic regression analysis. Input data for logistic regression analysis is the results of a survey of 4,558 people conducted by the Institute for Occupational Safety and Health were used. There are 9 independent variables, including the change a workplace and confidential counseling, and the dependent variable is whether the worker feels the effect on the psychosocial risk management plan. As a result of this study, changes in work organization, dispute resolution procedures, provision of education program, notification of the impact of psychosocial risks on safety and health, and the persons in charge of solving psychosocial problems are shown effective in reducing worker's psychosocial risks. This study drives which of the management plans implemented to reduce the psychosocial risk of workers in the workplace are effective, so it can contribute to the development of psychosocial risk management plans in the future.

• Journal of the Korean Society of Safety
• /
• v.38 no.2
• /
• pp.104-111
• /
• 2023

Rolling stock maintenance, which focuses on preventive maintenance, is typically implemented considering the potential harm that may be inflicted to passengers in the event of failure. The cost of preventive maintenance throughout the life cycle of a rolling stock is 60%-75% of the initial purchase cost. Therefore, ensuring stability and reducing maintenance costs are essential in terms of economy. In particular, private railroad operators must reduce government support budget by effectively utilizing railroad resources and reducing maintenance costs. Accordingly, this study analyzes the reliability characteristics of components using field data. Moreover, it resolves the problem of determining an economical replacement interval considering the timing of scrapping railroad vehicles. The procedure for determining the optimal replacement interval involves five steps. According to the decision model, the optimal replacement interval for the onboard signal device components of the "A" line train is calculated using field data, such as failure data, preventive maintenance cost, and failure maintenance cost. The field data analysis indicates that the mileage meter is 9 years, which is less than the designed durability of 15 years. Furthermore, a life cycle in which the phase signal has few failures is found to be the same as the actual durability of 15 years.

• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• v.26 no.5
• /
• pp.249-265
• /
• 2023

Purpose: Infant regurgitation is associated with other functional gastrointestinal disorders and signs and symptoms that have a major impact on the quality of life of infants and their families. This study evaluated the safety, tolerance, and real-world effectiveness of an anti-regurgitation formula containing locust bean gum (LBG), prebiotics, and postbiotics to alleviate digestive symptoms beyond regurgitation. Methods: This 3-month study involved infants with regurgitation requiring the prescription of an anti-regurgitation formula according to usual clinical practice. Outcomes included evaluation of the evolution of stool consistency and frequency; occurrence of colic, constipation, and diarrhea; and assessment of regurgitation severity. Infant crying, parental assessment of infant well-being, and parental satisfaction with the stool consistency were also evaluated. Results: In total, 190 infants (average age: 1.9±1.1 months) were included. After three months, stool frequency and consistency remained within the normal physiological range, with 82.7% of infants passing one or two stools per day and 90.4% passing loose or formed stools. There was no significant increase in the number of infants with diarrhea, whereas a decrease was observed in the number of infants with constipation after 1 month (p=0.001) and with colic after both 1 and 3 months (p<0.001). Regurgitation severity and crying decreased and parental satisfaction with stool consistency, formula acceptability, infant well-being, and sleep quality increased. Monitoring of adverse events did not reveal any safety concerns. Conclusion: Formulas containing LBG, prebiotics, and postbiotics were well tolerated and provided an effective strategy for managing infant regurgitation and gastrointestinal discomfort.

• Journal of Auto-vehicle Safety Association
• /
• v.8 no.4
• /
• pp.24-30
• /
• 2016

In Korea, the Vehicle Dismantler and Recycler industry is supervised by the Ministry of Land, Infrastructure and Transport under the Automobile Management Act. Also, Korean Automotive recycling businesses are supervised by the Minister of Environment under the Resource Recirculation Act. The main concern of the Minister of Environment is how the wastes from Dismantled vehicles will be environmentally removed, stored, treated, recycled or disposed. In 2000, the European Union (EU) adopted the End-of-Life Vehicles Directive (2000/53/EC) which required Members to ensure the collection, treatment and recovery of end-of-life vehicles (ELVs). The Directive, the most tightly regulated and precautionary legal systems, required that the last owner of a vehicle could drop off the ELV at an authorized treatment facility and that the producers of the ELV should pay the cost of the program. The adoption of the ELVs directive has led the development of Automotive Dismantler and Recycler networks to reuse, refurbish, remanufacture, recycle and recover parts and materials embedded in ELVs. Also, the ELVs directive which has had an insignificant impact on Korean manufacturers has strong presence in the European market and has been successfully externalized on them. The Korean manufacturers not only achieve the 85% recycling target set by the ELVs directive but also meet the Extended Producer Responsibility (EPR) which requires manufacturers to contribute dismantling process. In order to improve the Korean vehicle dismantling and recycling system, the Automobile Management Act and the Resource Recirculation Act should be harmonized. Particularly the roles of the Ministry of Land, Infrastructure and Transport and the Minister of Environment should be sharply divided. Like Japan, the ELV management needs to be highly centralized, regulated, and controlled by the ministry specialized in Vehicle, namely the Ministry of Land, Infrastructure and Transport and the sub organizations. Like EU Members, recovery, reuse, and recycling must be distinguished. Recovery is defined as the final productive use of the parts and materials embedded in ELVs, which includes reuse and remanufacture of parts and recycling of the other materials. Dismantling process and reuse and remanufacture of parts must be governed by the Ministry of Land, Infrastructure and Transport. For environmental recycling or disposal of waste materials, such as CFCs, glass and plastic material, and toxic substances, governmental financial support system should be in place.

• Nuclear Engineering and Technology
• /
• v.56 no.1
• /
• pp.147-159
• /
• 2024

Plutonium-238 has always been considered as the one of the promising radioisotopes for space nuclear power supply, which has long half-life, low radiation protection level, high power density, and stable fuel form at high temperatures. The industrial-scale production of ²³⁸Pu mainly depends on irradiating solid ²³⁷NpO₂ target in high flux reactors, however the production process faces problems such as large fission loss and high requirements for product quality control. In this paper, a conceptual design study of producing ²³⁸Pu in a multi-purpose high flux reactor was evaluated and analyzed, which includes a sensitivity analysis on ²³⁸Pu production and a further study on the irradiation scheme. It demonstrated that the target structure and its location in the reactor, as well as the operation scheme has an impact on ²³⁸Pu amount and product quality. Furthermore, the production efficiency could be improved by optimizing target material concentration, target locations in the core and reflector. This work provides technical support for irradiation production of ²³⁸Pu in high flux reactors.

• Journal of Korean Academy of Nursing
• /
• v.30 no.5
• /
• pp.1156-1169
• /
• 2000

The study was aimed at developing an independent hospice center model that would be best suited for Korea based on a literature review and the current status of local and international hospices. For the study, five local and six international hospice organizations were surveyed. Components of the hospice center model include philosophy, purpose, resources (workers, facilities, and equipment), allocation of resources, management, financial support and hospice team service. The following is a summary of the developed model: Philosophies for the hospice center were set as follows: based on the dignity of human life and humanism, help patients spend the rest of their days in a meaningful way and accept life positively. On the staff side, to pursue a team-oriented holistic approach to improve comfort and quality of life for terminally ill persons and their families. The hospice center should have 20 beds with single, two, and four bed rooms. The center should employ, either on a part-time or full-time basis, a center director, nurses, doctors, chaplains, social workers, pharmacists, dieticians, therapists, and volunteers. In addition, it will need an administrative staff, facility managers and nurses aides. The hospice should also be equipped with facilities for patients, their families, and team members, furnished with equipment and goods at the same level of a hospital. represented by a center director who reports to a board and an advisory committee. Also, the center director administers a steering committee and five departments, namely, Administration, Nursing Service, Social Welfare, Religious Services, and Medical Service. Furthermore, the center should be able to utilize a direct and support delivery systems. The direct delivery system allows the hospice center to receive requests from, or transfer patients to, hospitals, clinics, other hospice organizations (by type), public health centers, religious organizations, social welfare organizations, patients, and their guardians. On the other hand, the support delivery system provides a link to outside facilities of various medical suppliers. In terms of management, details were made with regards to personnel management, records, infection control, safety, supplies and quality management. For financial support, some form of medical insurance coverage for hospice services, ways to promote a donation system and fund raising were examined. Hospice team service to be provided by the hospice center was categorized into assessment, physical care, emotional care, spiritual care, bereavement service, medication, education and demonstrations, medical supplies rental, request service, volunteer service, and respite service. Based on the results, the study has drawn up the following suggestions: 1. The proposed model for a hospice center as presented in the study needs to be tested with a pilot project. 2. Studies on criteria for legal approval and license for a hospice center need to be conducted to develop policies. 3. Studies on developing a hospice charge system and hospice standards that meet local conditions in Korea need to be conducted.

• Journal of Service Research and Studies
• /
• v.12 no.4
• /
• pp.72-81
• /
• 2022

As new disasters such as COVID-19, MERS, and earthquakes appear in modern society, the nation's ability to manage uncertain risks is becoming more important. The government is promoting a disaster safety management policy closely related to daily life by reinforcing on-site response capabilities. Therefore, in order to respond more effectively to disasters that have recently been enlarged, complicated, and delocalized, there is a limit to only disaster-related organizations in the public sector. It is necessary to check it and find ways to develop it. In the event of an unpredictable national disaster or infection, the government needs disaster safety management measures closely related to daily life. Accordingly, as an efficient response and strategy such as procedures and methods for funeral support at the scene of a national disaster were needed, a designated funeral home was introduced. In the event of a major disaster, a large number of casualties that exceed the daily work level of the relevant department occur and rapid changes in relief, medical care, funeral and administrative procedures occur accordingly. The purpose of this study is to derive basic operating directions and prompt funeral support plans for funeral homes designated for national disaster preparedness.

• Journal of Aerospace System Engineering
• /
• v.12 no.3
• /
• pp.38-44
• /
• 2018

Military aircraft may have fatigue cracks in structurally weak areas due to multiple factors such as the accumulation of flight time while perform various missions and unpredictable air conditions. As a fatigue crack progresses, there is a risk that the structure will be destroyed in extreme cases, which can have a significant impact on flight safety. In this study, a cracking phenomenon was observed during the periodic inspection the inner support of the fairing, which is installed to protect the connection between the wing and the body of the aircraft. Therefore, a study on a series of quality improvement processes for reformation was described. In order to identify the causes of cracks, pre-load generation occurrence during the wing assembly process was investigated and a fracture analysis was performed. Also, the design of the support structure was suggested in terms of preventing recurrence of cracks. The structural integrity was verified using a stress and fatigue life analysis.

• Journal of Technologic Dentistry
• /
• v.36 no.2
• /
• pp.99-110
• /
• 2014

Purpose: This study was carried out in order to examine the relationship of job satisfaction and social support on the dental technicians and to analyze its influence. Methods: A self-reported questionnaire survey was carried out by having convenience sampling as 220 dental technicians who work in Seoul Metropolis, Gyeonggi-do Province, Daejeon and Chungnam Province. A research tool was used questionnaire that was proved reliability and validity. It was prepared with totally 37 questions such as 12 items for subjects' general characteristics, 18 items for job satisfaction measurement, and 7 items for social support measurement. An analysis of the collected data was computationally processed by using SPSS Win 17.0 program. An analytical technique was made by using statistical techniques such as frequency & percentage, T-test or One-way ANOVA analysis. The following are the analytical results of the collected materials. Results: As a result of analyzing research subjects' job satisfaction level, there was significant difference(P<0.05) in items of religion, hobby life, working environment, and rest time out of daily work. The whole mean in job satisfaction was indicated to be relatively high with 3.13. However, job satisfaction with social recognition, salary, and safety was indicated lowly. As a result of analyzing research subjects' social support level, there was significant difference(P<0.05) in items of age, working environment, and rest time out of daily work. The whole mean in social support was indicated to be relatively high with 3.49. As a result of analyzing correlation between job satisfaction and social support, all variables were indicated to be positive correlation in high significance level, thereby having been indicated that the higher job satisfaction leads to the higher social support. Conclusion: As a result of this study, there is high correlation between social support and job satisfaction. An effort and a support are considered to be necessary for forming positive personal relations among members such as relationship with family member and with fellow employee, for improving the working conditions, and for enhancing dental technicians' pride and social recognition in order to promote dental technician's job satisfaction.