• Journal of the Ergonomics Society of Korea
• /
• v.25 no.2
• /
• pp.11-22
• /
• 2006

The muscular-skeletal disorders(MSDs) that have become a major issue recently in Korean industrial safety area are mainly caused by manual material handling task. The objective of this study is to provide scientific data for the establishment of work safety standard for Korean workers through the experiments of lifting task under various conditions, in order to prevent the muscular-skeletal disorders in the industrial work site. Eight male college students were recruited as participants. Three different lifting frequencies(1, 3, 5 lifts/min) and three twisting angles(including the sagittal plane and two asymmetric angles; i.e., 0°, 45°, 90°) for symmetric and asymmetric tasks, respectively, with three lifting range from floor to knuckle height, knuckle to shoulder, floor to shoulder height for one hour's work shift using free style lifting technique were studied. The maximum acceptable weight of load(MAWL) was determined under the different task conditions, and the oxygen consumption, heart rate, and RPE were measured or recorded while subjects were lifting their MAWLs. The results showed that: (1) The MAWLs were significantly decreased as the task frequency and task angle increased.; (2) The heart rate, oxygen consumption, RPE significantly increased with an increase in lifting frequency although maximum acceptable weight of lift decreased.; (3) The highest heart rate and oxygen consumption was recorded at the lifting range of floor to shoulder, followed by floor to knuckle and knuckle to shoulder.; (4) The RPE value showed that subjects perceived more exertion at the high frequency rate of lifting task and lifting range of floor to shoulder height. (5) The modeling for MAWL using isometric strength, task angle and lifting frequency were developed. It is expected that use of the results provided in this study may prove helpful in reducing MMH hazards, especially from lifting tasks for Korean, and can be used as a basis for pre-employment screening.

• Journal of Computational Design and Engineering
• /
• v.1 no.3
• /
• pp.173-186
• /
• 2014

The failure of a subsea production plant could induce fatal hazards and enormous loss to human lives, environments, and properties. Thus, for securing integrated design safety, core source technologies include subsea system integration that has high safety and reliability and a technique for the subsea flow assurance of subsea production plant and subsea pipeline network fluids. The evaluation of subsea flow assurance needs to be performed considering the performance of a subsea production plant, reservoir production characteristics, and the flow characteristics of multiphase fluids. A subsea production plant is installed in the deep sea, and thus is exposed to a high-pressure/ low-temperature environment. Accordingly, hydrates could be formed inside a subsea production plant or within a subsea pipeline network. These hydrates could induce serious damages by blocking the flow of subsea fluids. In this study, a simulation technology, which can visualize the system configuration of subsea production processes and can simulate stable flow of fluids, was introduced. Most existing subsea simulations have performed the analysis of dynamic behaviors for the installation of subsea facilities or the flow analysis of multiphase flow within pipes. The above studies occupy extensive research areas of the subsea field. In this study, with the goal of simulating the configuration of an entire deep sea production system compared to existing studies, a DES-based simulation technology, which can logically simulate oil production processes in the deep sea, was analyzed, and an implementation example of a simplified case was introduced.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.10 no.1
• /
• pp.179-207
• /
• 2000

Hazardous organic solvents management as prescribed by presidential decree in Korea is reviewed. The status of import, manufacture, and circulation of organic solvents was investigated. Problems inherent in the management of organic solvents in the electroplating, metal degreasing, and dry cleaning industries were discussed. The chemical substance management system in Korea was compared to those of foreign organizations. A walk-through check list was developed and then used to assess the actual conditions and potential hazards of chemical substances in these industries. The questionnaire could be used to develop a chemical management system and protect workers from hazardous substances. Based on the results of the site survey, MSDSs were not integrated appropriately into the workers education and were not readily accessible to employees. In the case of the dry cleaning industry, the new dry cleaning solvent used as a substitute includes a lot of potentially hazardous organic solvents. This research is preliminary. It is recommended that a national survey be performed to better identify the current situation. Because chemical substances are regulated by thirteen laws in seven executive branches, management systems often overlap, resulting in ineffective control. Using the above results, a model for managing chemical substances was developed. This will more efficiently provide MSDS information to workers covered by the presidential decree and allow the construction of a management system database for better cooperation with the executive branches in Korea.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.19 no.6
• /
• pp.265-271
• /
• 2015

The tsunami hazard analysis is performed for testing the application of probabilistic tsunami hazard analysis to nuclear power plant sites in the Korean Peninsula. Tsunami hazard analysis is based on the seismic hazard analysis. Probabilistic method is adopted for considering the uncertainties caused by insufficient information of tsunamigenic fault sources. Logic tree approach is used. Uljin nuclear power plant (NPP) site is selected for this study. The tsunamigenic fault sources in the western part of Japan (East Sea) are used for this study because those are well known fault sources in the East Sea and had several records of tsunami hazards. We have performed numerical simulations of tsunami propagation for those fault sources in the previous study. Therefore we use the wave parameters obtained from the previous study. We follow the method of probabilistic tsunami hazard analysis (PTHA) suggested by the atomic energy society of Japan (AESJ). Annual exceedance probabilities for wave height level are calculated for the site by using the information about the recurrence interval, the magnitude range, the wave parameters, the truncation of lognormal distribution of wave height, and the deviation based on the difference between simulation and record. Effects of each parameters on tsunami hazard are tested by the sensitivity analysis, which shows that the recurrence interval and the deviation dominantly affects the annual exceedance probability and the wave heigh level, respectively.

• Journal of the Korean Institute of Gas
• /
• v.16 no.5
• /
• pp.7-13
• /
• 2012

An experimental study has been done to investigate the explosion characteristics of aluminum powders with different sizes and concentrations in a 20 L spherical explosion vessel. Two different sizes of aluminum powder were used : $15.1{\mu}m$ and $34.8{\mu}m$ with a volume mean diameter. The results revealed that $15.1{\mu}m$ Al powder has a Lower explosion limit (LEL) of $40g/m^3$, a maximun explosion pressure ($P_{max}$) of 9.8 bar and a maximum rate of pressure rise ($[dP/dt]_{max}$) of 1852 bar/s, in $34.8{\mu}m$ Al powder, LEL of $70g/m^3$, $P_{max}$ of 7.9 bar and $[dP/dt]_{max}$ of 322 bar/s. The LEL of Al powders tended to increase with the increase of particle size. Also, it was found that the flame velocity calculated from the powder with $15.1{\mu}m$ was about 5 times higher than that of the powder of $34.8{\mu}m$.

• Journal of the Korean Society of Safety
• /
• v.32 no.6
• /
• pp.22-28
• /
• 2017

According to the National Fire Data System (NFDS), more than 5,000 vehicle fires have occurred every year for the last 10 years. Vehicle fires are primarily caused by mechanical (breaking system and engine), electrical (wiring and battery), and chemical (oil and fuel gas leakage) problems. The electrical factor has increased with the installation of driver convenience equipment. For example, today, the black box is widely used to provide video data recording of motor vehicle accidents. The black box consists of a front camera, rear camera, and wires. The black box wires are directly connected to the junction box or fuse box from the start battery that operates to provide normal on power supplying for engine stop. It is extremely dangerous when the wires short circuit due to insulation aging, mechanical and electrical stress, etc. In this study, the black box wiring fire risk have been analyzed and investigated when the steady state and abnormal operations, and under the following conditions: wiring arrangements with a high temperature condition, insulation aging, poor contact, and short circuits. The results showed that black box wiring short circuits had a higher fire risk than the other fire hazard elements. To prevent fire hazards caused by black box wiring, the black boxes must be installed by qualified service personnel. Do not modify the wiring, remove the fuse and secure the wiring using cable ties or insulation tape.

• Journal of Food Hygiene and Safety
• /
• v.18 no.4
• /
• pp.237-242
• /
• 2003

Sequences of industrial microbial counts of foods shows irregular fluctuating patterns as adeinition of fluctuating microbial counts(FMC). Recently, it beame clear that the FMC was considered as having a lognormal distribution as a first order approximation. Application of lognormal distribution to the industrial microbial counts could produce useful information in practice. This study is intended to verift the application method of lognormal idstribution in FMC. The one year's records for microbial counts of frozen dumplings from two companies were obtained, and the statistical analysis was carried out to estimate the frequencies of future events where counts exceeding selected levels and to compare the sanitation level of the two companies. The results showed that this spplication method enable translation of irregular recourds of microbial counts into an useful information such as te actual probalities of outburst of a given level and the quantitative predictions of potential hazards in the processing.

• Journal of Food Hygiene and Safety
• /
• v.23 no.3
• /
• pp.177-181
• /
• 2008

Mycotoxins produced by molds isolated from discolored sun-dried red pepper fruits were determined and the toxicity to animals was also tested by feeding mold-grown unpolished rice to rats. Among the mold species tested, only Alternaria alternata was toxic to experimental animals, while other mold species belonging to the genera of Colletotrichum, Diaporthe, Diaporthopsis, Botryosphereia, Aspergillus and Fusarium were not. Rats fed Alternaria-grown rice lost weight and died within two weeks of feeding period. Succumbed rats during the process of feeding study showed extreme cases of enlargements of stomach, small intestine and liver. Among the 17 Alternaria isolates, 8 species produced considerable amount of tenuazonic acid along with small amounts of other toxins including alternariol and monomethyl ether derivative of alternariol in both red pepper homogenate and unpolished rice. It is therefore advised that red pepper fruits infested by molds during the sun-drying process be discarded to avoid unnoticeable health hazards.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.16
• /
• pp.6559-6564
• /
• 2014

Objective: To evaluate the efficacy and safety of bevacizumab in the treatment of patients with metastatic colorectal cancer (mCRC). Methods: In a single-center, observational study of 91 Chinese patients with mCRC who received bevacizumab in combination with chemotherapy was conducted. Objective response rates (ORRs), progression-free survival (PFS), overall survival (OS) and adverse events were recorded, and the relationships between various clinical factors and PFS or OS were evaluated by Cox proportional hazards models. Results: Treatment with bevacizumab and chemotherapy was effective and tolerable. Univariate analysis showed that PFS and OS were significantly associated with the Eastern Cooperative Oncology Group performance status (ECOG-PS) score, duration of bevacizumab exposure, and whether chemotherapy was continued after discontinuation of bevacizumab treatment. A multivariate analysis showed that the duration of bevacizumab exposure and whether chemotherapy was continued after discontinuation of bevacizumab were independent prognostic factors for PFS and OS. Conclusion: In Chinese mCRC population, the shorter the duration of exposure to bevacizumab and chemotherapy, the worse the prognosis is.

• Fisheries and Aquatic Sciences
• /
• v.17 no.2
• /
• pp.197-201
• /
• 2014

This study was performed to identify and assess food hazards during dry laver processing. Samples including raw materials, intermediates, and finished products during dried-laver processing were collected from seven dried-laver processing facilities, and microbial analyses were conducted. Microbial levels such as total coliforms and total viable cell count (TVC) increased as the processing steps progressed. TVC and total coliforms ranged from <30 to $9.1{\times}10^7$ CFU/g and <18 to 27,600 MPN/100 g for intermediates and finished products obtained during dried-laver processing, respectively. However, no fecal coliform was detected in the samples. Additionally, food-borne bacteria including Bacillus cereus, Listeria monocytogenes, Salmonella sp., Staphylococcus aureus, and Vibrio parahaemolyticus were not identified in finished products. For heavy metal content, arsenic ranged from 30.18 to 39.05 mg/kg, mercury from 0.005 to 0.009 mg/kg, and cadmium from 0.076 to 0.318 mg/kg dry mass in all finished products. However, lead was not detected in samples tested in this study. In conclusion, dried-laver products were safe based on the levels of food-borne bacteria and heavy metal contents. However, it is important to reduce total viable cell counts and total coliforms during dried-laver processing.