• 대한안전경영과학회지
• /
• 제15권3호
• /
• pp.105-112
• /
• 2013

To meet the growing needs from a variety of stakeholders, the development of modern systems is getting more complex and thus, the systems failure in the actual operations can potentially become more serious. This is why several international or military standards on systems safety have been published. In spite of the importance of meeting those standards such as IEC 61508 and ISO 26262 in the systems development, the associated practical methods seem deficient since those standards do not provide them. The objective of this paper is to present a method to identify potential hazards in fulfilling the requirements of the safety standards. In particular, the approach taken here is based on applying the functional analysis that covers several levels of the system under development. Note, however, that in the most of the conventional methods for hazards identification, the analysis has been focused on the failure at or underneath the component level of the system. The hazards identification method in this paper would cover the level up to the system by utilizing the functions-oriented approach. The case study of the safety enhancement for locomotive cabs is also discussed.

• 한국안전학회지
• /
• 제7권3호
• /
• pp.43-52
• /
• 1992

This research presents how to make more efficient management for preventing accidents in construction site. One of the most efficient way to do so is to quantify those potential hazards and risks, resulting from it. Also it has been tried to rate & weigh each Item of those hazards, depending on the degree of risk. The goal if this qualification method is to establish ensuring the required safety. These are rated & compared with the degree of understandings of each item & accomplishment of those codes.

• 해양환경안전학회:학술대회논문집
• /
• 해양환경안전학회 2017년도 공동학술발표회
• /
• pp.163-163
• /
• 2017

• International Journal of Aerospace System Engineering
• /
• 제9권1호
• /
• pp.1-15
• /
• 2022

Pyrotechnic initiators provide a source of pyrotechnic energy used to initiate a variety of space mechanisms. Pyrotechnic systems build in electromagnetic environment that may lead to critical or catastrophic hazards. Special precautions are need to prevent a pulse large enough to trigger the initiator from appearing in the pyrotechnic firing circuits at any but the desired time. The EMC verification shall be shown by analysis or test that the pyrotechnic systems meets the requirements of inadvertent activation. The MIL-STD-1576 and two range safeties, AFSPC and CSG, require the safety margin for electromagnetic potential hazards to pyrotechnic systems to a level at least 20 dB below the maximum no-fire power of the EED. The PC23 is equivalent to NASA standard initiator and the 1EPWH100 squib is ESA standard initiator. This paper verifies the two safety margins for electromagnetic potential hazards. The first is verified by analyzing against a RF power. The second is verified by testing against a DC current. The EMC safety margin requirement against RF power has been demonstrated through the electric field coupling analysis in differential mode with 21 dB both PC23 and 1EPWH100, and in common mode with 58 dB for PC23 and 48 dB for 1EPWH100 against the maximum no-fire power of the EED. Also, the EMC safety margin requirement against DC current has been demonstrated through the electrical isolation test for the pyrotechnic firing circuits with greater than 20 dB below the maximum no-fire current of the EED.

• 전기학회논문지P
• /
• 제57권3호
• /
• pp.328-331
• /
• 2008

This study presents on the analysis fire hazards of drum type electric washing machine. In order to analyze fire hazards fire experiment is conducted. The fire experiment is conducted to simulate under the normal condition and abnormal condition. The experiment under the abnormal condition is simulated in safety device failure, situation of accumulated dust and tracking phenomenon caused by humidity. The results show that fire hazard is high at the abnormal condition. In this paper, we suggest to use the safety device of low operating temperature in electric washing machine for reducing fire hazard.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2005년도 추계학술대회 논문집
• /
• pp.287-292
• /
• 2005

Safety of Station electric equipment is not analysed yet. this paper try the safety first times on the basis of hazards which railway stations contain. The stations use many electric equipment such as lights, escalator and elevator for facilitating for passengers and public moving, HVAC system making good environment and so on. The electric equipments could be changed to harmful systems to passengers and publics resulting from abnormal operation condition. To ensure safeties in the station, we need to identify and analyse the hazards in the station and to provide risk mitigation methods. In this paper, we shows processes and methods to ensure the safety, how to identify and analyse the hazards. Finally, we demonstrate how to mitigate the potential risks in the stations.

• Safety and Health at Work
• /
• 제9권3호
• /
• pp.239-248
• /
• 2018

Background: Workers may be exposed to various types of occupational hazards at the same time, potentially increasing the risk of adverse health outcomes. The aim of this review was to analyze the effects of multiple occupational exposures and coexposures to chemical, biomechanical, and physical hazards on adverse health outcomes among agricultural workers. Methods: Articles published in English between 1990 and 2015 were identified using five popular databases and two complementary sources. The quality of the included publications was assessed using the methodology developed by the Effective Public Health Practice Project assessment tool for quantitative studies. Results: Fifteen articles were included in the review. Multiple chemical exposures were significantly associated with an increased risk of respiratory diseases, cancer, and DNA and cytogenetic damage. Multiple physical exposures seemed to increase the risk of hearing loss, whereas coexposures to physical and biomechanical hazards were associated with an increased risk of musculoskeletal disorders among agricultural workers. Conclusion: Few studies have explored the impact of multiple occupational exposures on the health of agricultural workers. A very limited number of studies have investigated the effect of coexposures among biomechanical, physical, and chemical hazards on occupational health, which indicates a need for further research in this area.

• 한국산업보건학회지
• /
• 제32권3호
• /
• pp.209-220
• /
• 2022

Objectives: This study was performed to suggest how to re-establish criterion for toxic substances under the Chemical Control Act (CCA) in South Korea by comparing the GHS (Globally Harmonized System of Classification and Labeling of Chemicals) score and toxic properties. Methods: Toxic substances were classified into seven groups (Acute toxicity (1A), Chronic toxicity (2C), Environmental hazards (3E), Acute toxicity & chronic toxicity (4AC), Chronic toxicity & environmental hazards (5CE), Acute toxicity & environmental hazards (6AE), and Acute toxicity & chronic toxicity & environmental hazards (7ACE)) according to their toxic properties. The GHS score was calculated to sum up five toxicity indicators (health acute toxicity, health repeated toxicity, carcinogenicity, health other chronic toxicity and environmental hazards). Results: The GHS score of 7ACE was higher by 7 times that of 1A. 1A is the only group which has lower than the total GHS score. The highest score was 47, for sodium chromate (CAS no. 7775-11-3), which belongs to group 7ACE. This is classified as acute toxicity, carcinogenicity, germ cell mutagenicity, reproductive toxicity, and acute and chronic environmental hazard. On the other hand, the lowest score was 2.75, which was assigned to 177 chemicals belonging to group 1A. When the health acute toxicity indicator was omitted from the toxic criterion, toxic substances could be divided into the sub-groups 'human chronic hazards group' (HCG) and 'environmental hazards group' (EG) according to their GHS score and properties. Conclusions: The proposed criterion for toxic substances is to establish sub-groups defined as HCG and EG for separate control and that the 1A group be moved to substances requiring preparation for accidents under the CCA.

• Annals of Occupational and Environmental Medicine
• /
• 제35권
• /
• pp.7.1-7.14
• /
• 2023

Background: At present, no short standard questionnaire exists for assessing and comparing major work organization hazards in the workplaces of the United States. Methods: We conducted a series of psychometric tests (content validity, factor analysis, differential-item functioning analysis, reliability, and concurrent validity) to validate and identify core items and scales for major work organization hazards using the data from the 2002-2014 General Social Surveys (GSSs), including the Quality of Worklife (QWL) questionnaire. In addition, an extensive literature review was undertaken to find other major work organization hazards which were not addressed in the GSS. Results: Although the overall validity of the GSS-QWL questionnaire was satisfactory in the psychometric tests, some GSS-QWL items of work-family conflict, psychological job demands, job insecurity, use of skills on the job, and safety climate scales appeared to be weak. In the end, 33 questions (31 GSS-QWL and 2 GSS) were chosen as the least, but best validated core questions and included in a new short standard questionnaire (called the Healthy Work Survey [HWS]). And their national norms were established for comparisons. Furthermore, based on the literature review, fifteen more questions for assessing other significant work organization hazards (e.g., lack of scheduling control, emotional demands, electronic surveillance, wage theft) were included in the new questionnaire. Thus, the HWS includes 48 questions in total for assessing traditional and emerging work organization hazards, which covers seven theoretical domains: work schedule/arrangement, control, support, reward, demands, safety, and justice. Conclusions: The HWS is a short standard questionnaire for assessing work organization hazards which can be used as a first step toward the risk management of major work organization hazards in the workplaces of the US.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제55권12호
• /
• pp.661-666
• /
• 2006

Interlocking signalling system plays key role as core system to manage railway operation. The core role of railway operation is to control routing, displaying signal and regulation for train. Interlocking system relate tightly to railway accident because collision and derailment is sometime taken place wrong route setting and signal displaying. Safety activity for interlocking system is inevitable to avoid the accident over its life cycle. The safety activity includes hazard identification and analysis, safety requirement allocation, safety plan, safety activity and ao on. The safety activity need a broad wide range work. In this paper, we concentrate on hazard identification for generic interlocking system and programmable electronic interlocking system and compare between two results. The hazards will be used for safety activity.