• Journal of the Korean Institute of Gas
• /
• v.27 no.2
• /
• pp.65-70
• /
• 2023

Flammable materials used in semiconductor supply facilities are manufactured at high temperatures and high pressures, and as the semiconductor industry becomes more sophisticated and larger, the amount of materials used is rapidly increasing. Recently, fires and explosions occurred during the handling of acetic acid, which is a raw material for making products in the semiconductor material manufacturing process. Overall problems such as lack of air inflow prevention for fire and explosion prevention were identified. Therefore, in this study, in order to accurately identify the cause of the accident and prevent fire and explosion that may occur in the process of handling large amounts of flammable liquids, opinions from various perspectives, such as construction of facilities such as hoppers, installation of AOPS components, and change in workers' perceptions would like to present.

• Journal of the korean Society of Automotive Engineers
• /
• v.12 no.3
• /
• pp.21-29
• /
• 1990

Equipments of passenger cars with modern technologies are gaining their importance. Related with such developments, the four-wheel steering system (4WS) was introduced recently to a few passenger cars in the market. The most important research goal on this new steering system is improvement of active safety, in other words, improvement of handling characteristics of vehicle stability and maneuverability. This paper presents a computer-based study about the effects of 4WS system on the vehicle handling characteristics. A simple bicycle model of 2 d.o.f. is used for the development of four wheel control algorithms of 4WS system, and the rear wheel control strategies are applied to a complex vehicle model of 16 d.o.f. for simulation of selected ISO-driving tests. The 4WS systems, which reduce the sideslip angle at the mass center of vehicle to almost zero, show much improved handling characteristics compared to that of the conventional 2WS system. These 4WS systems, however, result in vehicles with eigen-steer characteristics of extreme understeer behaviour.

• Journal of Radiation Protection and Research
• /
• v.39 no.4
• /
• pp.218-221
• /
• 2014

Nuclear Safety Act had described the three types of licenses on radioisotope handling, such as a general license, a special license and a supervisory license. Applicants should be qualified by careers and qualifications for the education and training to acquire the licenses. In particular, the information on the estimation for the career is notified by Nuclear Safety and Security Commission(NSSC). In this paper, we suggest an improvement by analyzing survey data at the end of the education course on a license for the supervisor of radiation handling. We applied the learning evaluation to improve the education course. The level of satisfaction with the improved curriculum was compared with the existing curriculum. The improved curriculum with the learning evaluation has shown high grades of performance, i.e. above 4.0 points (full mark: 5.0 points) on the level of satisfaction and field application. The learning evaluation should be applied to the basic education course on a general license for radioisotope handling.

• Preventive Nutrition and Food Science
• /
• v.10 no.4
• /
• pp.357-363
• /
• 2005

The purpose of this study was to assess current food-handling practices of employees in school food service settings, as well as their knowledge levels, and identify relationships between knowledge, practices, and influencing variables. The survey was conducted for dietitians and employees in the school foodservice industry in Gyeongsangbuk-do province. A total of 270 and 570 questionnaires for dietitians and employees, respectively, were distributed by mail. Response rates were $62\%$ (N=171) and $66\%$ (N=376) from dietitians and employees, respectively. Data was analyzed using SPSS Windows (version 10.0). Descriptive statistics were used to summarize data. Pearson correlations were applied to test for relationships between knowledge and practice of HACCP principles. Stepwise regression analysis was performed to examine the influence of knowledge, current education guidelines, demographic information (working experience, academic background, and certification for food and cooking), and school characteristics (food production system, service style, and number of meals). School foodservice employees were found to have a significant amount of food safety knowledge ($67.5\pm1.8$ out of 100 possible points). Proper food handling practices were not always being followed in many schools. The relationship between their knowledge, current HACCP education training, and food handling practices was not significant. These results suggested the present situation of HACCP trainings performed by dietitians were inadequate for many school foodservice operations. The number of meals in school was an independent predictor of the employees' food-handling practices. These results suggest that an effective education program should integrate endeavors that take account of social and environmental influences on food safety to support the improvement of food-handling practices and the implementation of a HACCP program. Furthermore, dietitians should continue to provide consulting, training, and technical assistance to schools on HACCP implementation.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.25 no.1
• /
• pp.27-35
• /
• 2015

Objectives: To investigate safety and health management, conditions in factories or facilities handling radiation-generating devices and radioactive isotopes were reviewed in terms of regulations of radiation safety control in Korea. Radiation exposure levels generated at those facilities were directly measured and evaluated for establishing an effective safety and health management plan. Methods: Government organizations with laws and systems of radiation safety and health were investigated and compared. There are three laws governing radiation-related employment such as occupational safety and health acts, nuclear safety acts, and medical service acts. We inspected 12 workplaces as research objects:four workplaces that manufacture and assemble semiconductor devices, three non-destructive inspection workplaces that perform inspections on radiation penetration, and five workplaces in textile and tire manufacturing. Monitoring of radiation exposure was performed through two methods. Spatial and surface monitoring using real-time radiation instruments was performed on each site handling radiation generating devices and radioactive isotopes in order to identify radiation leakage. Results: According to the occupational safety and health act, there is no legal obligation to measure ionizing radiation and set dose limits. This can cause confusion in the application of the laws, because the scopes and contents are different from each other. Surface dose rates in radiation generating devices such as implanters, thickness gages and accelerators, which were registered according to nuclear safety acts, using surveymeters, and seven of 36 facilities(19.4%) exceeded the international standards for surface radiation dose of $10{\mu}Sv/hr$. Conclusions: The results showed that occupational health and safety acts require a separate provision for measuring and assessing the radiation exposure of workers performing radiation work. Like noise, ionizing radiation will also periodically be controlled by including it in the object factors of work-environment measurement.

• Journal of the Korea Safety Management & Science
• /
• v.18 no.3
• /
• pp.63-70
• /
• 2016

The main point of this study is to find out duplicates and differences among various regulations from different organizations. Also, it focuses on creating a reasonably unified regulation system to standardize safety & environment management. In this study, I analyzed the commonalities and the differences of two systems which are typical korean Process Safety Management System and off-site Consequence Analysis. It is confirmed that there are 25 species of overlapped material of those two systems and assessment like handling material information, facilities lists, hazardous substances and list of machine power. Process safety report focuses on onsite workers and facility protect. On the other hand, off-site Consequence Analysis focuses on design, arrangement and management of handling facility from off-site influence. I found difference two system of Enforcement purposes and way. Contradiction of Harmful information of Chemicals Control Act and occupation safety and health acts from same material. To be specific, There are no unit rule of occupation safety and health acts. so it permit inch, psi etc. But Chemicals Control Act provides that m, Mpa units. Therefore, Each regulatory duplication of items for chemicals management, standardization is writing so that you can coordinate overlapping items in the measures the need to be presented.

• Safety and Health at Work
• /
• v.8 no.3
• /
• pp.282-289
• /
• 2017

Background: The objective of this study was to report on the prevalence of musculoskeletal pain in lobstermen in the northeast USA. Methods: Crews were randomly selected from those licensed to fish in Maine and Massachusetts and followed prospectively. The survey used a Nordic Musculoskeletal Questionnaire format to characterize musculoskeletal disorders. Results: A total of 395 individuals participated. One half of the respondents reported low back pain. Back pain was attributed to or exacerbated by lobstering. Low back pain was prevalent among both captains and sternmen, while sternmen reported more hand/wrist pain than captains. Multiple locations for pain were common in individual participants. Conclusion: Equipment or technology to assist material handling should be a priority, as the body segments with high prevalence of pain (back, hand/wrists, shoulders, knees) are all affected by the repetitive and forceful handling of the lobster traps.

• Journal of the Korean Society of Safety
• /
• v.23 no.3
• /
• pp.36-41
• /
• 2008

For the safety design and operation of many chemical process, it is necessary to know certain explosion limit, flash point and autoignition temperature(AIT) of handling substances. Also it is necessary to know explosion limit at high temperature and pressure. For the safe handling of MEK(methyl ethyl ketone), explosion limit at $25^{\circ}C$ and the temperature dependence of the explosion limits were investigated. And flash point and AIT for MEK were experimented. By using the literatures data, the lower and upper explosion limits of MEK recommended 1.8 vol% and 11.0 vol%, respectively. In this study, measured the lower and upper flash points of MEK were $-5^{\circ}C$ and $22^{\circ}C$, respectively. This study measured relationship between the AITs and the ignition delay times by using ASTM E659-78 apparatus for MEK, and the experimental AIT of MEK was $507^{\circ}C$. The new equations for predicting the temperature dependence of the explosion limits of MEK is proposed. The values calculated by the proposed equations were a good agreement with the literature data.

• Proceedings of the KSR Conference
• /
• 2007.05a
• /
• pp.1193-1198
• /
• 2007

The total number of passengers for Line $1{\sim}4$ operated by Seoul Metro among subways that act as foot of Seoul residents was 1.43116 billion passengers in 2006 and average of 3.921 million passengers per day. The results of analysis on safety accidents that occurred recently in subways show that various complaints on subways were reduced through the expansion of safety related facilities and training but accidents caused by negligent handling by employees including engineers are increasing on the contrary. At present time where various man-made accidents break out such as wrong handling and habits of engineers in charge of driving trains and momentary mistakes, there needs effort for active management and improvement to prevent and minimize accidents. Therefore, this study has drawn out problems through surveys on aptitude test system to engineers and compared with case studies in overseas. Thus, it attempted to minimize safety accidents in subways, and derived methods for improving safety management by focusing on improving the current aptitude test system for nurturing engineers suitable to handle railway driving in the future.

• Journal of the Korean Society of Safety
• /
• v.24 no.2
• /
• pp.89-93
• /
• 2009

The muscular-skeletal disorders that have become a major issue recently in Korean industrial safety area are mainly caused by manual material handling task. The objective of this study is to provide scientific data for the establishment of work safety standard for Korean workers through the experiments of lifting task under various conditions, in order to prevent the muscular-skeletal disorders in the industrial work site. This study used the psychophysical approach to determine the maximum acceptable weight(MAWL) for seven young male subjects, and used isometric and isoinertial strength variables as predictors to develop prediction models. Also, the oxygen consumption, heart rate, and RPE were measured or recorded while subjects were lifting their MAWL. Three different lifting frequencies(1, 3, 5lifts/min) with two lifting range from floor to knuckle height and knuckle to shoulder height for one hour's work shift using free style lifting technique were studied. These results may not only provide scientific data in establishing the safety standards for Korean workers' lifting tasks, but also contribute preventing the rapidly increasing muscular-skeletal disorders lately on the industrial site.