• 대한안전경영과학회지
• /
• 제11권1호
• /
• pp.121-130
• /
• 2009

This paper considers a six sigma project for reducing the cost copper of the cable materials in a electric wire company. The project follows a disciplined process of five macro phases: define, measure, analyze, improve, and control (DMAIC). A process map is used to identify process input variables. Three key process input variables are selected by using an input variables are selected by using an input variable evaluation table: large cable, plating, and a twisted pair. DOE is utilized for finding the optimal process conditions of the three key process input variables. The implementing result of this six sigma project is enable for reducing of the 2.8% copper materials.

• 한국군사과학기술학회지
• /
• 제17권4호
• /
• pp.404-412
• /
• 2014

We proposed a design method for squib current supply & interlock circuits in guided-missile fire control systems. In order to design squib current supply circuits, various missile squib loads including line resistance and squib devices have to be considered in advance minimizing probability of redesign of circuits and reducing the development cost by implementing the most proper squib current supply circuit. Also, we presented a hardware interlock logic instead of the commonly used software safety logic to improve the safety of guided-missile fire control systems. The proposed squib interlock circuit enhances safety requirements of guided-missile fire control systems. We confirmed that simulation and measurement results of the proposed design method are the same as theoretical analysis results.

• International Journal of Automotive Technology
• /
• 제5권2호
• /
• pp.115-122
• /
• 2004

Evaluation of active safety control systems usually relies heavily on field testing and is time-consuming and costly. Advances in computer simulations make it possible to perform exhaustive design trials and evaluations before field testing, and promise to dramatically reduce development cost and cycle time. In this paper, a comprehensive simulation-based evaluation procedure is proposed, which combines standard evaluation maneuvers, worst-case techniques, and a driver model for closed-loop path following evaluations. A vehicle dynamic controller (VDC) for a popular Sport Utility Vehicle is evaluated using the proposed procedure. Simulation results show that the proposed procedure can be used to assess the performance of the VDC under various conditions and provides valuable information for the re-design of the VDC.

• 대한안전경영과학회지
• /
• 제14권1호
• /
• pp.179-187
• /
• 2012

This paper presents a six sigma application case study for an automobile PCSV manufacturing process using rolled throughput yield improvement activity. Hidden factor and first yield concept is introduced and DMAIC procedure is implemented to maximize the first pass yield. The result of the six sigma project amounts to the reduction of failure cost of 0.1 billion won per year in the PCSV manufacturing process. This paper can benefit six sigma practitioners in some ways.

• Journal of Power Electronics
• /
• 제18권5호
• /
• pp.1369-1379
• /
• 2018

In this paper, a model predictive torque control (MPTC) without the use of a weighting factor for surface mounted permanent-magnet synchronous machine (SPMSM) drive systems is presented. Firstly, the desired voltage vector is predicted in real time according to the principles of deadbeat torque and flux control. Then the sector of this desired voltage vector is determined. The complete enumeration for testing all of the feasible voltage vectors is avoided by testing only the candidate vectors contained in the sector. This means that only two voltage vectors in the sector need to be tested for selecting the optimal voltage vector in each control period. Thus, the calculation time can be reduced when compared with the conventional enumeration method. On the other hand, a novel cost function that only includes the dq-axis voltage errors between the desired voltage and candidate voltage is designed to eliminate the weighting factor used in the conventional MPTC. Thus, the control complexity caused by the tuning of the weighting factor is effectively decreased when compared with the conventional MPTC. Simulation and experimental investigation have been carried out to verify the proposed method.

• Steel and Composite Structures
• /
• 제33권6호
• /
• pp.767-776
• /
• 2019

In this article, a simple and robust multi-objective assessment method to control design angles and node positions connected among steel outrigger truss members is proposed to approve both structural safety and economical cost. For given outrigger member layouts, the present method utilizes general-purpose prototypes of outrigger members, having resistance to withstand lateral load effects directly applied to tall buildings, which conform to variable connecting node and design space deposition. Outrigger layouts are set into several initial design conditions of height to width of an arbitrary given design space, i.e., variable design space. And then they are assessed in terms of a proposed multi-objective function optimizing both minimal total displacement and material quantity subjected to design impact factor indicating the importance of objectives. To evaluate the proposed multi-objective function, an analysis model uses a modified Maxwell-Mohr method, and an optimization model is defined by a ground structure assuming arbitrary discrete straight members. It provides a new robust assessment model from a local design point of view, as it may produce specific optimal prototypes of outrigger layouts corresponding to arbitrary height and width ratio of design space. Numerical examples verify the validity and robustness of the present assessment method for controlling prototypes of outrigger truss members considering a multi-objective optimization achieving structural safety and material cost.

• 한국항해학회지
• /
• 제20권3호
• /
• pp.43-63
• /
• 1996

The purpose of this study is to find out what is the functional role of VTS in order to get the people concerned with marine traffic/transportation understand about VTS. VTS could be described as the essential risk management system in both cost effective on cost-benefit analysis and the sea space or time management at port, coastal environment. The important role of the VTS are those functions such as the decision making infrastructure, the passive/active safety measures at sea. VTS could not control/regulate marine traffic as strong as ATC(Air Traffic Control) owing to the marine traffic characters. However, the right and responsibility of VTS finally are belong to the master, pilot and mariners. For the benefit of the electronic technology development, VTS system also cloud be upgraded to communication system from information system. In connection with these system upgrading, the right and responsibility of VTS/staff should be supported by domestic legal system. The followings are presented for VTS to be effective. First, the cooperation and understanding of VTS between the peoples concerned with marine traffic/transportation are essential. Because they are all data supplier and also information consumers. Second, VTS staff/regulator should be selected, educated, trained accordingly as per their career, ability, quality, qualification, certification and etc. Third, the port reliability from VTS users depends on the factors such as economic interests, safety and effectiveness/efficiency of VTS.

• 한국항해항만학회지
• /
• 제41권5호
• /
• pp.259-268
• /
• 2017

Formal Safety Assessment (FSA) has been mostly implemented on the hardware aspects of vessels. Although there are guidelines regarding human error FSAs, there have not been many assessments in such areas. To this end, this study seeks to use precedent studies for the safe operation of DP vessels, conducting an FSA regarding human error of DP LOP (Loss of Position) incidents. For this, the study referred to precedent studies for the frequency of DP LOP incidents caused by human errors, adding the severity of LOP incidents, and then applying them to the Bayesian network. As a result, the study was able to confirm that among DP LOP incidents caused by human errors, the drive-off from skill-based errors was 74.3% and the drive-off from unsafe supervision was 50.5%. Based on such results, RCOs (Risk Control Options) were devised through a brainstorming session with experts coming up with proposals including providing mandatory DPO training, installing DP simulator on the vessels, drawing up measures to understanding the procedures for safe operation of DP vessels. Moreover, it was found that mandatory DPO training is reasonable in terms of cost benefits and that while installing a DP simulator is not suitable in terms of cost benefits, it can significantly reduce risks when operating DP vessels.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2001년도 춘계학술대회 논문집
• /
• pp.133-138
• /
• 2001

Formal safety assessment (FSA) is defined as a structured and systematic methodology aimed at enhancing maritime safety including protection of life, health, and the marine environment and property, by using risk and cost/benefit assessment or, more specifically, it is a process of identifying hazard, evaluating risk and deciding on course of action to control those risks. Emphasis is placed on the structural aspect of the failure of cargo hold. This study is expected to illustrate how a new methodology, i.e. the Formal Safety Assessment, can be applied to specific ship safety problems.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 추계학술대회 논문집
• /
• pp.83-88
• /
• 2001

This paper deals with the economical equipment control which is used by internet network system at the industrial workplace. If the control devices can be accessed by internet, we can have the developed possibility of work conditions. In this paper, we presented the advanced digital timer which has a communication function to control and observe panel to realize control solution based on internet to be easily applicable at workplace with low cost. and we used 485 serial communication module to have parallel expansibility and safety. And, this system was experimented and designed for easy system management and status check from remote station through internet As the result of experiment, the circuit configuration would be more simplified than the existing, and it is expected that multi connection control and monitoring can be simply implemented with low cost equipment at industrial workplace.