• Progress in Superconductivity and Cryogenics
• /
• v.18 no.2
• /
• pp.25-29
• /
• 2016

High charge state electron cyclotron resonance (ECR) ion source is important on the performance of heavy ion accelerators. In this paper, a low temperature superconductor (LTS) was used to make a hexapole coil for an 18-GHz ECR ion source. Several hexapole structures, including racetrack, graded racetrack, and saddle were implemented and analyzed for the hexapole-in-solenoid ECR ion source system. Under the appropriate radial confinement field, the smaller outer radius of hexapole can be better for the solenoid design. Saddle hexapole was selected by comparing the wire length, maximum outer radius of the hexapole, the Lorentz force at the end part of the hexapole and the maximum magnetic field in the coil. Based on saddle hexapole, a new design for hexapoles, the snake hexapole, was developed in this paper. By comparative analysis of the Lorentz force at the end part of the saddle and snake hexapoles, the snake hexapole is much better in the ECR ion source system. The suggested design for the ECR ion source with the snake hexapole is presented in this paper.

• Journal of the Korean Society of Industry Convergence
• /
• v.24 no.6_2
• /
• pp.745-751
• /
• 2021

The International Maritime Organization(IMO) has established Emission Control Areas(ECA) in the Baltic Sea, North Sea, and sea areas in the United States since 2012, and encourages the use of clean fuels such as Natural Gas(NG). To keep pace with the increase in international demand for LNG bunkering vessels, research for the localization of key equipment for LNG bunkering must also be performed in Korea. For research and development of core bunkering equipment and systems, in this study, heat transfer analysis and structural analysis were performed by modeling the saddle, which must first be secured structurally by directly receiving the load of the hose. As a result, the suitability of the model was reviewed by analyzing the temperature distribution and stress level through the analysis results of this study.

• Wind and Structures
• /
• v.36 no.2
• /
• pp.133-147
• /
• 2023

The random vibration of saddle membrane structures under wind load is studied theoretically and experimentally. First, the nonlinear random vibration differential equations of saddle membrane structures under wind loads are established based on von Karman's large deflection theory, thin shell theory and potential flow theory. The probabilistic density function (PDF) and its corresponding statistical parameters of the displacement response of membrane structure are obtained by using the diffusion process theory and the Fokker Planck Kolmogorov equation method (FPK) to solve the equation. Furthermore, a wind tunnel test is carried out to obtain the displacement time history data of the test model under wind load, and the statistical characteristics of the displacement time history of the prototype model are obtained by similarity theory and probability statistics method. Finally, the rationality of the theoretical model is verified by comparing the experimental model with the theoretical model. The results show that the theoretical model agrees with the experimental model, and the random vibration response can be effectively reduced by increasing the initial pretension force and the rise-span ratio within a certain range. The research methods can provide a theoretical reference for the random vibration of the membrane structure, and also be the foundation of structural reliability of membrane structure based on wind-induced response.

• Conservation Science in Museum
• /
• v.1
• /
• pp.75-86
• /
• 1999

Conservation treatments were done for the gilt bronze saddle accessory excavated from Tomb No. 89 in Kyo-dong, Changnyong in Japanese rule period. The saddle accessory, broken into numerous pieces, was mixed with other remains. Principal aims of conservation treatments were to recover original shape of object and stabilize its material. In the process of treatments manufacturing technique of the remain was examined minutely. Thick layers of corrosion substances were peeled off and numerous pieces were pasted together to restore the original shape. And then the saddle accessory was mounted on an acrylic board to be handled and exhibited safely. In this process, it was confirmed that various ancient techniques of metalic crafts such as amalgam gilding, riveting, piercing, line engraving, stamping, chasing etc. had been used to make the saddle accessory.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.47 no.3
• /
• pp.1-6
• /
• 2010

A comparative analysis of quantum-mechanical and classical simulation regarding corner effect in a Saddle MOSFET has been carried out using a 3-D numerical simulator. The comparison has shown that quantum simulation gives correct description of device by providing accurate peak E-density position and magnitude at the Si-fin cross-section, hence accurate analysis of corner effect and its impact on device threshold voltage (Vth) characteristics is carried out. Moreover, rounding the Si-fin comers or lowering the body doping have been shown as two possible techniques to suppress the undesirable corner effect.

• Journal of the Korean Magnetics Society
• /
• v.20 no.2
• /
• pp.75-82
• /
• 2010

A recent progress on the prediction of the thermal stability of a nanostructured exchange-coupled trilayer is reviewed. An analytical/numerical combined method is used to calculate its magnetic energy barrier and hence the thermal stability parameter. An important feature of the method is the use of an analytical equation for the total energy that contains the magnetostatic fields. Under an assumption of the single domain state, the effective values of all the magnetostatic fields can be obtained by averaging their nonuniform values over the entire magnetic volume. In an equilibrium state, however, it is not easy to calculate the magnetostatic fields at the saddle point due to the absence of suitable methods of the accessing its magnetic configuration. This difficulty is overcome with the use of equations that link the magnetostatic fields at the saddle point and critical fields. Since the critical fields can readily be obtained by micromagnetic simulation, the present method should provide accurate results for the thermal stability of a nanostructured exchange-coupled trilayer.

• Physical Therapy Rehabilitation Science
• /
• v.3 no.2
• /
• pp.101-106
• /
• 2014

Objective: To investigate the appropriate position for abdominal drawing-in maneuver (ADIM) exercise by rehabilitative ultrasound image. Design: Cross-sectional study. Methods: Twenty-eight young adults with no history of low back pain participated in the study. Three positions compared were crook lying position with hip $60^{\circ}$ flexion, standing position with the feet hip width apart and knees straight, and saddle standing positionunsupported with the knees $20^{\circ}$ flexed. Once in the appropriate position, the subjects were verbally cued to draw in their abdominal wall, with the intention of pulling their navel inward toward their lower back. The thickness of each transversus abdominis (TrA), internal oblique (IO), and external oblique (EO) muscles were measured via ultrasound and recorded at the end of inspiration. Results: When compared to the TrA thickness of rest, the TrA thickness was significantly increased in all three positions (crook lying, standing, and saddle standing) during the ADIM (p<0.05). IO thickness was significantly greater in standing and saddle standing than in crook lying (p<0.05). EO thickness was constant in all the three positions. Conclusions: The present study suggests that standing and saddle standing positions could be recommended for the ADIM to maximize recruitment of the TrA and IO activation. Specifically, the saddle standing position with knees flexed to $20^{\circ}$ was observed to increase the TrA activation more than the standing position. These findings should be considered when core stability exercises such as the ADIM are conducted.

• Journal of the Korean Society for Precision Engineering
• /
• v.24 no.3 s.192
• /
• pp.55-60
• /
• 2007

The electro-acoustic guitar pickup converts the vibration of strings to the electric signals, and delivers them to an amplifier. The vibration of the strings is transferred to the piezoelectric material through the saddle. This paper aims to improve sound quality for electro-acoustic guitars through the finite element analysis of the saddle. Firstly, the conventional pickup is modeled and analyzed with a commercial program called ANSYS. It is obvious that there exists interference phenomenon of stress. A structural modification of the pickup is performed, based on the beam theory. The modified structure is modeled and analyzed. Finally, the fabricated structures are subjected to the measurements and compared with the conventional pickup. It can be concluded that the interference with the modified structure is much less than that with the conventional structure, and that the sound quality is improved with the modified structures.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.11a
• /
• pp.853-861
• /
• 2007

To understand the concept of dynamic motion in two degree nonlinear coupled system, free vibration not including damping and excitation is investigated with the concept of nonlinear normal mode. Stability analysis of a coupled system is conducted, and the theoretical analysis performed for the bifurcation phenomenon in the system. Bifurcation point is estimated using harmonic balance method. When the bifurcation occurs, the saddle point is always found on Poincare's map. Nonlinear phenomenon result in amplitude modulation near the saddle point and the internal resonance in the system making continuous interchange of energy. If the bifurcation in the normal mode is local, the motion remains stable for a long time even when the total energy is increased in the system. On the other hand, if the bifurcation is global, the motion in the normal mode disappears into the chaos range as the range becomes gradually large.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1995.04a
• /
• pp.603-616
• /
• 1995

Presented in this paper is an algorithm to obtain the intersections of a polyhedral surface composed of triangle facets with a series of parallel planes for extracting machining information from the surface. The change of the topology of the intersection curves is caused by characteristic points of the surface when sectioning the surface with parallel planes. The characteristic points are internal maximum, internal minimum, internal saddle, boundary maximum, boundary minimum, boundary max-saddle, and boundary min-saddle points. The starting points of the intersects are found efficiently and robustly using the characteristic points. The characteristic points as well as the intersection contours can be used to evaluate the machining information for process planning, and to generate NC tool path in CAD/CAM system.